Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Agilent Varian Helium Leak Detectors On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale Edwards nEXT300D TStations On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Flexible KF-16 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-16, 10 ft Hose, & PVC Cement Kit
In Stock
19


Flexible KF-16 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-16 Adapters, 10 ft Hose, & PVC Cement Kit Customer Assembly Required, Hose Must Be Cut To Length, KF-16 Adpater Solvent Weld Required. Our do-it-yourself (DIY) PVC flexible hose kits are a perfect economical solution when constructing a vacuum pump exhaust line. They are an economical way to connect a vacuum pumps exhaust to a KF flanged fume hood or exhaust manifold system. Customer assembly is required; the hose is shipped in a 10-foot section which can easily be cut to the desired length, two each KF-16 Schedule 80 Polyvinyl Chloride (PVC) hose adapters are included, along with a PVC cement and primer kit. These PVC hose kits are not recommended for use as a vacuum intake line for roughing pump applications where pressure is lower than 1 Torr. Customer assembly required (customer must trim the hose to their desired length and install the PVC to KF adapter flanges using the supplied solvent weld kit). Additional KF to PVC hose adapters are shown in the optional accessories below. Kit Includes: 10 Foot Length Of Hose, Size OD: 0.75 inch PVC Cement and Primer Installation Kit. 2 Each KF-16 Flanges: Polyvinl Chloride PVC

Condition: New



Part Number: P106035



Price: $141.51



Currency: US Dollar (USD)

Flexible KF-25 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-25, 10 ft Hose, & PVC Cement Kit
In Stock
19


Flexible KF-25 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-25 Adapters, 10 ft Hose, & PVC Cement Kit Customer Assembly Required, Hose Must Be Cut To Length, KF-25 Adpater Solvent Weld Required. Our do-it-yourself (DIY) PVC flexible hose kits are a perfect economical solution when constructing a vacuum pump exhaust line. They are an economical way to connect a vacuum pumps exhaust to a KF flanged fume hood or exhaust manifold system. Customer assembly is required; the hose is shipped in a 10-foot section which can easily be cut to the desired length, two each KF-25 Schedule 80 Polyvinyl Chloride (PVC) hose adapters are included, along with a PVC cement and primer kit. These PVC hose kits are not recommended for use as a vacuum intake line for roughing pump applications where pressure is lower than 1 Torr. Customer assembly required (customer must trim the hose to their desired length and install the PVC to KF adapter flanges using the supplied solvent weld kit). Additional KF to PVC hose adapters are shown in the optional accessories below. Kit Includes: 10 Foot Length Of Hose, Size OD: 0.75 inch PVC Cement and Primer Installation Kit. Two Each KF-25 Flanges: Polyvinl Chloride PVC

Condition: New



Part Number: P107328



Price: $166.12



Currency: US Dollar (USD)

Flexible KF-40 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-40, 10 ft Hose, & PVC Cement Kit
In Stock
14


Flexible KF-40 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-40 Adapters, 10 ft Hose, & PVC Cement Kit Customer Assembly Required, Hose Must Be Cut To Length, KF-40 Adpater Solvent Weld Required. Our do-it-yourself (DIY) PVC flexible hose kits are a perfect economical solution when constructing a vacuum pump exhaust line. They are an economical way to connect a vacuum pumps exhaust to a KF flanged fume hood or exhaust manifold system. Customer assembly is required; the hose is shipped in a 10-foot section which can easily be cut to the desired length, two each KF-40 Schedule 80 Polyvinyl Chloride (PVC) hose adapters are included, along with a PVC cement and primer kit. These PVC hose kits are not recommended for use as a vacuum intake line for roughing pump applications where pressure is lower than 1 Torr. Customer assembly required (customer must trim the hose to their desired length and install the PVC to KF adapter flanges using the supplied solvent weld kit). Additional KF to PVC hose adapters are shown in the optional accessories below. Common Dimensions: 10 Foot Length Of Hose, Size OD: 1.00 inch PVC Cement and Primer Installation Kit. Two Each KF-40 Flanges: Polyvinl Chloride PVC

Condition: New



Part Number: P107329



Price: $203.03



Currency: US Dollar (USD)

Flexible KF-50 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-50, 10 ft Hose, & PVC Cement Kit
In Stock
16


Flexible KF-50 Vacuum Pump Exhaust Hose, Do It Yourself, 2 each KF-50 Adapters, 10 ft Hose, & PVC Cement Kit Customer Assembly Required, Hose Must Be Cut To Length, KF-50 Adpater Solvent Weld Required. Our do-it-yourself (DIY) PVC flexible hose kits are a perfect economical solution when constructing a vacuum pump exhaust line. They are an economical way to connect a vacuum pumps exhaust to a KF flanged fume hood or exhaust manifold system. Customer assembly is required; the hose is shipped in a 10-foot section which can easily be cut to the desired length, two each KF-50 Schedule 80 Polyvinyl Chloride (PVC) hose adapters are included, along with a PVC cement and primer kit. These PVC hose kits are not recommended for use as a vacuum intake line for roughing pump applications where pressure is lower than 1 Torr. Customer assembly required (customer must trim the hose to their desired length and install the PVC to KF adapter flanges using the supplied solvent weld kit). Additional KF to PVC hose adapters are shown in the optional accessories below. Kit Includes: 10 Foot Length Of Hose, Size OD: 1.50 inch PVC Cement and Primer Installation Kit. Two Each KF-50 Flanges: Polyvinl Chloride PVC

Condition: New



Part Number: P107330



Price: $227.64



Currency: US Dollar (USD)

Adapter KF-16 to 3/4 in. ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-16, Schedule 80 Polyvinyl Chloride
In Stock
995


Adapter KF-16 to 3/4 inch ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-16, Schedule 80 Polyvinyl Chloride (PVC)These adapters are KF-16 to 3/4 inch ID for PVC flex hose tubing. The flange size follows ISO-KF standards and is NW-16. They are commonly used to make connections between ISO-KF fittings and PVC Tubing, requires cementing. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of Schedule 80 Polyvinyl Chloride. This is ONE KF16 to 3/4 inch ID PVC Tubing Hose Adapter Only, Hose/Tubing Not Included.Adapter KF-16 to 3/4 inch PVC Tubing, ISO-KF Flange Size NW-16, Schedule 80 Polyvinyl ChlorideFlange Size: ISO-KF NW-16Flex Hose Tubing Size: 3/4 inch ID PVC tubing

Condition: New



Part Number: P101385



Price: $15.99




Currency: US Dollar (USD)

Adapter KF-25 to 3/4 in. ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-25, Schedule 80 Polyvinyl Chloride
In Stock
958


Adapter KF-25 to 3/4 inch ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-25, Schedule 80 Polyvinyl Chloride (PVC)These adapters are KF-25 to 3/4 ID inch for PVC flex hose tubing. The flange size follows ISO-KF standards and is NW-25. They are commonly used to make connections between ISO-KF fittings and PVC Tubing, requires cementing. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of Schedule 80 Polyvinyl Chloride. This is ONE KF25 to 3/4 inch ID PVC Tubing Hose Adapter Only, Hose/Tubing Not Included.Adapter KF-25 to 3/4 inch PVC Tubing, ISO-KF Flange Size NW-25, Schedule 80 Polyvinyl ChlorideFlange Size: ISO-KF NW-25Flex Hose Tubing Size: 3/4 inch PVC tubing

Condition: New



Part Number: P101386



Price: $21.35




Currency: US Dollar (USD)

Adapter KF-40 to 1.0 in. ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-40, Schedule 80 Polyvinyl Chloride
In Stock
880


Adapter KF-40 to 1.0 inch ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-40, Schedule 80 Polyvinyl Chloride (PVC)These adapters are KF-40 to 1.0 inch ID for PVC flex hose tubing. The flange size follows ISO-KF standards and is NW-40. They are commonly used to make connections between ISO-KF fittings and PVC Tubing, requires cementing. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of Schedule 80 Polyvinyl Chloride. This is ONE KF40 to 1 inch ID PVC Tubing Hose Adapter Only, Hose/Tubing Not Included.Adapter KF-40 to 1.0 inch PVC Flex Hose Tubing, ISO-KF Flange Size NW-40, Schedule 80 Polyvinyl ChlorideFlange Size: ISO-KF NW-40Flex Hose Tubing Size: 1.0 inch PVC tubing

Condition: New



Part Number: P101387



Price: $26.69




Currency: US Dollar (USD)

Adapter KF-50 to 1.5 in. ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-50 Schedule 80 Polyvinyl Chloride
In Stock
894


Adapter Adapter KF-50 to 1-1/2 inch ID for PVC Flex Hose Tubing, ISO-KF Flange Size NW-50, Schedule 80 Polyvinyl Chloride (PVC)These adapters are KF-50 to 1-1/2 inch ID for PVC flex hose tubing. The flange size follows ISO-KF standards and is NW-50. They are commonly used to make connections between ISO-KF fittings and PVC Tubing, requires cementing. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of Schedule 80 Polyvinyl Chloride. This is ONE KF50 to 1-1/2 inch ID PVC Tubing Hose Adapter Only, Hose/Tubing Not Included.Adapter KF-50 to 1-1/2 inch PVC Flex Hose Tubing, ISO-KF Flange Size NW-50, Schedule 80 Polyvinyl ChlorideFlange Size: ISO-KF NW-50Flex Hose Tubing Size: 1-1/2 inch PVC tubing

Condition: New



Part Number: P101388



Price: $32.06




Currency: US Dollar (USD)

PVC Flex Hose 3/4 in. ID, White Plastic for Venting Exhaust, (Sold by Foot)
In Stock
192


PVC Flex Hose 3/4 in. ID, White Plastic for Venting Exhaust, (Sold by Foot). PVC Flex Hose. White Plastic Hose. For Single Stage Pump Intake Hose or Venting Exhaust Gas. This is the Hose ONLY, Connector Flages and PVC Glue Sold Separately. This is PVC Plastic Flex Hose (Sold by the Foot)Common Dimensions:Inside Diameter: 3/4 inchFor End PVC Connector Flange KF16, go to: (P101385 on this website) For End PVC Connector Flange KF25, go to: (P101386 on this website)

Condition: New



Part Number: P1011098



Price: $6.28



Currency: US Dollar (USD)

PVC Flex Hose 1 in. ID, White Plastic for Venting Exhaust, (Sold by Foot)
In Stock
140


PVC Flex Hose 1 in. ID, White Plastic for Venting Exhaust, (Sold by Foot). PVC Flex Hose. White Plastic Hose. For Single Stage Pump Intake Hose or Venting Exhaust Gas. This is the Hose ONLY, Connector Flages and PVC Glue Sold Separately. This is PVC Plastic Flex Hose (Sold by the Foot)Common Dimensions:Inside Diameter: 1 inchFor End PVC Connector Flange KF40, go to: (P101387 on this website)

Condition: New



Part Number: P1011099



Price: $6.28



Currency: US Dollar (USD)

PVC Flex Hose 1.5 in. ID, White Plastic for Venting Exhaust, (Sold by Foot)
In Stock
169


PVC Flex Hose 1.5 in. ID, White Plastic for Venting Exhaust, (Sold by Foot). PVC Flex Hose. White Plastic Hose. For Single Stage Pump Intake Hose or Venting Exhaust Gas. This is the Hose ONLY, Connector Flages and PVC Glue Sold Separately. This is PVC Plastic Flex Hose (Sold by the Foot) Common Dimensions: Inside Diameter: 1.5 inch For End PVC Connector Flange KF50, go to: (P101388 on this website)

Condition: New



Part Number: P1011100



Price: $6.28



Currency: US Dollar (USD)

PVC Ratcheting Cutter, Cuts up to 1.5 in O.D. Solid PVC Pipe and Flex Hose
In Stock
8


PVC Ratcheting Cutter, Cuts up to 1.5 in. O.D. Solid PVC Pipe and Flex Hose. 1-1/2 in. Ratcheting PVC Cutter, Cuts up to 1.5 PVC Solid Piping and Flex Hose. Quick-change blade mechanism. Up to 40% less force needed to cut. NOT FOR STEEL SPRING REINFORCED PVC HOSE.

Condition: New



Part Number: P1011102



Price: $41.78



Currency: US Dollar (USD)

PVC Cement and Primer- For Flexible PVC Hose and Solid PVC Pipe
In Stock
22


PVC Cement and Primer- For Flexible PVC Hose and Solid PVC Pipe. Oatey 4 oz. PVC/CPVC Cement and Primer - Handy Pack, For Fexible PVC Hose and Solid PVC Pipe. Not for Steel Spring Reinforced PVC Hose.

Condition: New



Part Number: P1011101



Price: $37.40



Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com