Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Agilent TriScroll Pumps On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Agilent Varian Helium Leak Detectors On Sale Pfeiffer ASM340 Leak Detectors On Sale Adixen 2021C2 Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Welch 1400N ChemStar Explosion Proof Vacuum Pump, Chemical Resistant, Rotary Vane, New, PN: 1400N-90
In Stock
1


Welch 1400N ChemStar Explosion Proof Vacuum Pump for Pumping Corrosive Gases with Explosion Proof Motor. Explosion Proof Motor 1/3 HP, 1-phase. PN: 1400N-90. The Welch 1400N ChemStar belt drive rotary vane with Explosion Proof Motor is a durable vacuum pump with a superior vapor handling capability. The ChemStar pumps are a chemical resistant series which offers an excellent ultimate pressure of 1x10^-4 Torr. The Welch 1400N pumps have a pumping speed displacement of 0.9 CFM, operates on 115 VAC., pump 580 RMP, oil capacity of 0.62 qt., and the pump includes a gas ballast. These pumps are complete with explosion proof motor 1/3 horsepower, 1-phase, includes KF-16 flange to 3/4-20 thread adapters for both intake and exhaust, weighs 58 lbs., and dimensions LxWxH, 18x9x13 in. The Welch 1400N ChemStar belt drive rotary vane with explosion proof motor is a durable vacuum pump with a superior vapor handling capability, primarily for pumping corrosive gasses. These pumps are commonly used for vacuum furnace evacuation, backing turbomolecular pumps, backing diffusion pumps, rotary evaporation, refrigeration system evacuation, epoxy degassing, vacuum sterilization, backing mass spectrometers, freeze drying, vacuum centrifugal applications, vacuum distillation, space research, and other corrosive chemical vacuum processes. This unique Welch 1400N CHEMSTAR vacuum pump was designed to give you the maximum possible service life when evacuating corrosive gases. However, corrosive gases can cause damage to the most rugged vacuum pump in an improperly configured or improperly operated vacuum system. Please refer to the recommendations made in the ChemStar owner’s manual (can be downloaded below under AVAILABLE DOWNLOADS) for operating your CHEMSTAR vacuum pump successfully when pumping corrosive gases. OILS We recommend Welch DIRECTORR Gold oil for this pump and if the flow of strong acids or halogens exceeds 10% of gas flow, you must switch to a perfluoropolyethers (PFPE) such as Fomblin Y06/6, Fomblin is a registered trademark of Ausimont. In addition, if ozone is pumped and its concentration exceeds 100 ppm of the gas flow, a perfluoropolyether (PFPE) oil must be used. Perfluoropolyethers are very resistant to chemical attack by strong acids. All accessories and oils for this pump can be found on this website. NOTE: These explosion proof pumps are designed for environments where risk of building up concentrations of explosive/flammable vapors is high. Typically not required by EH&S for processing standard laboratory solvent vapors. XPRF Motors power cords do NOT have plugs on them, because to meet XPRF system requirements, all components must be XPRF, be sparkless, and power conduits must be wired to hermetically sealed electric junction boxes by a qualified electrician. If any component in the system, vacuum oven, freeze dryer, etc is NOT XPRF then you do not have an XPRF system. It is recommended that you consult with their EH&S department and decide if XPRF is indeed appropriate, or if choosing an alternative Welch vacuum pump makes more sense. Ideal Vacuum Products cannot recommend for or against use of XPRF motored vacuum pumps. That decision must remain the responsibility of each customer. We often get this question: How do I switch my CHEMSTAR from factory prepared hydrocarbon oil (DIRECTORR Gold) to the very chemical resistant PFPE fluorinated oils (Fomblin Y06/6), and what should I consider when doing this?First Part AnswerIf you are okay with a small amount of hydrocarbon oil left in the pump, then you are good to drain the new pump of as much hydrocarbon as possible, then fill with PFPE FOMBLIN Y06/6. The oil as seen in the sight glass will become milky, as it still has a small amount hydrocarbon oil inside. Overtime, with future PFPE oil changes, the oil will become less milky. The pump will run fine with no issues having the milky mixture, the pressure will be the same, the pump will last just as long.Second Part Answer When should I be concerned? Well, it depends on what you are pumping in your vacuum application and at what concentration. The hydrocarbon oil is not compatible with high concentrations of oxidizers, such as hydrogen chloride (HCl), hydrogen bromide (HBr), Oxygen (O2), Ozone (O3) and other oxidizers. If the percentage of oxidizer is above a small amount, then the pump should be rebuilt, completely taken apart, all hydrocarbon oil removed, and the pump rebuilt using only PFPE oil. Welch gives good guidance on this topic, they state “WARNING Do not use DIRECTORR gold oil when pumping gases containing more than 30% oxygen. The use of DIRECTORR gold which is supplied with the pump is a Flammability Hazard if more than 30% oxygen mixtures are pumped. When gases pumped into a CHEMSTAR pump exceed 30% oxygen of gas flow, the CHEMSTAR pump must be prepared with FOMBLIN Y06/6. In these cases, to switch from DIRECTORR Gold oil To Fomblin, the CHEMSTAR pump must be totally disassembled, and all parts cleaned of oil. The pump must then be assembled using Fomblin. Welch can carry out the conversion for you through our repair department. Call Welch factory at 847-676-8800 ext. 1 for details.”It is helpful to understand why Hot hydrocarbon oil is flammable and will burn in air or in the presence of an oxidizer. When hydrocarbon oil is heated inside the pump and an oxidizer is present, it can auto ignite, this is called reaching the flash point, it will burst into flames without even having a spark present. If the oxidizer concentration is high, the hydrocarbon oil can even spontaneously explode. This is not the case with PFPE oils, they are not flammable, in fact, they will actually put out a fire, acting as a fire retardant.Our RecommendationThere are a lot of things to consider when your vacuum application requires pumping of chemicals. We recommend that you study the document prepared by Welch, it is helpful, it covers pumping of acids, halogens, oxidizers, anhydrides, and other chemicals. The concentration of the evacuated chemicals is important, you can lower the concentration by diluting the system with dry inert gases, Welch gives good guidance on dilution practices. Please refer to Welch Vacuum document, see section “USING YOUR CHEMSTAR® PUMP WITH CORROSIVE GASES” 3rd Edition Applications Booklet, download from our website at: ChemStar Owner’s Manual and our Application Note in the Downloads Section.

Condition: New



Part Number: P105301



Price: $3,819.00


Regular Price: $4,020.00




Currency: US Dollar (USD)

Welch 1402N ChemStar Explosion Proof Vacuum Pump, Chemical Resistant, Rotary Vane, New. PN: 1402N-90
In Stock
2


Welch 1402N ChemStar Explosion Proof Rotary Vane Two-Stage Vacuum Pump. Explosion Proof Motor, ½ HP, 1-Ph, 115VAC 60Hz. PN 1402N-90 The Welch 1402N CHEMSTAR belt drive dual stage rotary vane vacuum pump with Explosion Proof Motor is a durable vacuum pump with a superior vapor handling capability. The ChemStar pumps are the chemical resistant series and offers an excellent ultimate pressure of 1x10^-4 Torr. They have a pumping speed displacement of 5.6 CFM, operates on 115 VAC., pump 525 RMP, oil capacity 2.25 qt., and the pump includes a gas ballast. These pumps are complete with 1-phase explosion proof motor 1/2 horsepower, includes KF-25 flange to 1-20 thread adapters for both intake and exhaust, weighs 133 lbs., and has dimensions LxWxH, 20x14x15.5 in. This unique Welch 1402N CHEMSTAR vacuum pump was designed to give you the maximum possible service life when evacuating corrosive gases. However, corrosive gases can cause damage to the most rugged vacuum pump in an improperly configured or improperly operated vacuum system. Please refer to the recommendations made in the CHEMSTAR Owner’s Manual (can be downloaded below under AVAILABLE DOWNLOADS) for operating your CHEMSTAR vacuum pump successfully when pumping corrosive gases. OILS We recommend Welch DIRECTORR Gold Oil for this pump and if the flow of strong acids or halogens exceeds 10% of gas flow, you must switch to a perfluoropolyethers (PFPE) such as Fomblin Y06/6, Fomblin is a registered trademark of Ausimont. In addition, if ozone is pumped and its concentration exceeds 100 ppm of the gas flow, a perfluoropolyether (PFPE) oil must be used. Perfluoropolyethers are very resistant to chemical attack by strong acids. All accessories and oils for this pump can be found on this website. NOTE: Two-stage pumps should not be operated continuously at pressures above 10 Torr. Designed for environments where risk of building up concentrations of explosive/flammable vapors is high. Typically not required by EH&S for processing standard laboratory solvent vapors. XPRF Motors power cords do NOT have plugs on them, because to meet XPRF system requirements, all components must be XPRF, be sparkless, and power conduits must be wired to hermetically sealed electric junction boxes by a qualified electrician. If any component in the system, vacuum oven, freeze dryer, etc is NOT XPRF then you do not have an XPRF system. Many customers who order Welch Vacuum Pumps with XPRF motors appreciate being informed of the above information. From there they can consult with their EH&S department and decide if XPRF is indeed appropriate, or if choosing an alternative Welch-llmvac Vacuum Pump makes more sense for expense and/or delivery lead time reasons. Welch-llmvac cannot recommend for or against use of XPRF motored Vacuum Pumps. That decision must remain the responsibility of each customer. We often get this question: How do I switch my CHEMSTAR from factory prepared hydrocarbon oil (DIRECTORR Gold) to the very chemical resistant PFPE fluorinated oils (Fomblin Y06/6), and what should I consider when doing this?First Part AnswerIf you are okay with a small amount of hydrocarbon oil left in the pump, then you are good to drain the new pump of as much hydrocarbon as possible, then fill with PFPE FOMBLIN Y06/6. The oil as seen in the sight glass will become milky, as it still has a small amount hydrocarbon oil inside. Overtime, with future PFPE oil changes, the oil will become less milky. The pump will run fine with no issues having the milky mixture, the pressure will be the same, the pump will last just as long.Second Part Answer When should I be concerned? Well, it depends on what you are pumping in your vacuum application and at what concentration. The hydrocarbon oil is not compatible with high concentrations of oxidizers, such as hydrogen chloride (HCl), hydrogen bromide (HBr), Oxygen (O2), Ozone (O3) and other oxidizers. If the percentage of oxidizer is above a small amount, then the pump should be rebuilt, completely taken apart, all hydrocarbon oil removed, and the pump rebuilt using only PFPE oil. Welch gives good guidance on this topic, they state “WARNING Do not use DIRECTORR gold oil when pumping gases containing more than 30% oxygen. The use of DIRECTORR gold which is supplied with the pump is a Flammability Hazard if more than 30% oxygen mixtures are pumped. When gases pumped into a CHEMSTAR pump exceed 30% oxygen of gas flow, the CHEMSTAR pump must be prepared with FOMBLIN Y06/6. In these cases, to switch from DIRECTORR Gold oil To Fomblin, the CHEMSTAR pump must be totally disassembled, and all parts cleaned of oil. The pump must then be assembled using Fomblin. Welch can carry out the conversion for you through our repair department. Call Welch factory at 847-676-8800 ext. 1 for details.”It is helpful to understand why Hot hydrocarbon oil is flammable and will burn in air or in the presence of an oxidizer. When hydrocarbon oil is heated inside the pump and an oxidizer is present, it can auto ignite, this is called reaching the flash point, it will burst into flames without even having a spark present. If the oxidizer concentration is high, the hydrocarbon oil can even spontaneously explode. This is not the case with PFPE oils, they are not flammable, in fact, they will actually put out a fire, acting as a fire retardant.Our RecommendationThere are a lot of things to consider when your vacuum application requires pumping of chemicals. We recommend that you study the document prepared by Welch, it is helpful, it covers pumping of acids, halogens, oxidizers, anhydrides, and other chemicals. The concentration of the evacuated chemicals is important, you can lower the concentration by diluting the system with dry inert gases, Welch gives good guidance on dilution practices. Please refer to Welch Vacuum document, see section “USING YOUR CHEMSTAR® PUMP WITH CORROSIVE GASES” 3rd Edition Applications Booklet, download from our website at: ChemStar Owner’s Manual and our Application Note in the Downloads Section.

Condition: New



Part Number: P105302



Price: $5,434.00


Regular Price: $5,720.00




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com