Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Agilent TriScroll Pumps On Sale Edwards nXR Multi Stage Roots Pumps On Sale Agilent Varian Helium Leak Detectors On Sale Adixen 2021C2 Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW16 KF16, Body size 4 inch OD
In Stock
11


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW16 KF16, Body size 4 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water,solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bak-eouts, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 10 B: 4 C: 1.5 D: 3.5 E: 4 F: 3 Liquid Nitrogen Reservoir: 0.75 liter Inlet & Outlet Flange Size: KF16

Condition: New



Part Number: P103849



Price: $823.28



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW16 KF16, Body size 4 in. OD
In Stock
1


Ideal Vacuum Vapor-Pumping Ideal Vacuum Angle Liquid Nitrogen Trap Inlet and Outlet NW16 KF16, Body size 4 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 12 B: 4 C: 1.5 D: 6 E: 5.5 F: 3 Liquid Nitrogen Reservoir: 0.75 liter Inlet & Outlet Flange Size: KF-16

Condition: New



Part Number: P103855



Price: $823.28



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF16, 0.75 in Ball Drain Valve, 4 in OD
In Stock
1


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF16, with 0.75 in Ball Drain Valve Body size: 4 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 0.75 liter Welded 0.75 in ball valve

Condition: New



Part Number: P108558



Price: $975.38



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW25 KF25, Body size 4 in. OD
In Stock
7


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW25 KF25, Body size 4 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 10.6 B: 4 C: 1.5 D: 3.5 E: 4 F: 3 Liquid Nitrogen Reservoir: 0.75 liter Inlet & Outlet Flange Size: KF25

Condition: New



Part Number: P103850



Price: $851.19



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW25 KF25, Body size 4 in. OD
In Stock
1


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW25 KF25, Body size 4 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 12 B: 4 C: 1.5 D: 6 E: 5.5 F: 3 Liquid Nitrogen Reservoir: 0.75 liter Inlet & Outlet Flange Size: KF25

Condition: New



Part Number: P103856



Price: $851.19



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF25, 0.75 in Ball Drain Valve, 4 in OD
Out of Stock
Anticipated Arrival 10 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF25, with 0.75 in Ball Drain Valve Body size: 4 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 0.75 liter Welded 0.75 in ball valve

Condition: New



Part Number: P108559



Price: $997.70



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW40 KF40, Body size 4 inch OD
In Stock
6


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 4 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 10.6 B: 4 C: 1.5 D: 3.6 E: 4 F: 3 Liquid Nitrogen Reservoir: 0.75 liter Inlet & Outlet Flange Size: KF40

Condition: New



Part Number: P103848



Price: $879.09



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 4 in. OD
In Stock
2


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 4 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 12 B: 4 C: 1.5 D: 6.3 E: 5.5 F: 3 Liquid Nitrogen Reservoir: 0.75 liter Inlet & Outlet Flange Size: KF40

Condition: New



Part Number: P103857



Price: $879.09



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF40, 0.75 in Ball Drain Valve, 4 in OD
Out of Stock
Anticipated Arrival 9 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF40, with 0.75 in Ball Drain Valve Body size: 4 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 4 inch OD body trap, 5 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 0.75 liter Welded 0.75 in ball valve

Condition: New



Part Number: P108561



Price: $1,025.61



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW25 KF25, Body size 6 inch OD
Out of Stock
Anticipated Arrival 10 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW25, KF-25, Body Size 6 inches OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 14.1 B: 6 C: 1.5 D: 4.6 E: 5.1 F: 5 Liquid Nitrogen Reservoir: 1.60 liter Inlet & Outlet Flange Size: KF-25

Condition: New



Part Number: P107717



Price: $990.72



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet/Outlet NW25 KF25, Body size 6 inch OD
Out of Stock
Anticipated Arrival 5 on 2024-05-23


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW25, KF-25, Body Size 6 inches OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 15.5 B: 6 C: 1.5 D: 8.1 E: 6.6 F: 5 Liquid Nitrogen Reservoir: 1.60 liter Inlet & Outlet Flange Size: KF-25

Condition: New



Part Number: P107716



Price: $990.72



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF25, 0.75 in Ball Drain Valve, 6 in OD
Out of Stock
Anticipated Arrival 3 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF25, with 0.75 in Ball Drain ValveBody size: 6 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 1.6 liter Welded 0.75 in ball valve

Condition: New



Part Number: P108560



Price: $1,193.06




Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW40 KF40, Body size 6 in. OD
Out of Stock
Anticipated Arrival 3 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 6 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 14.1 B: 6 C: 1.5 D: 4.6 E: 5.1 F: 5 Liquid Nitrogen Reservoir: 1.60 liter Inlet & Outlet Flange Size: KF40

Condition: New



Part Number: P103851



Price: $1,011.65



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 6 in. OD
Out of Stock
Anticipated Arrival 5 on 2024-05-23


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 6 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 15.5 B: 6 C: 1.5 D: 8.4 E: 6.6 F: 5 Liquid Nitrogen Reservoir: 1.60 liter Inlet & Outlet Flange Size: KF40

Condition: New



Part Number: P103858



Price: $1,011.65



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF40, 0.75 in Ball Drain Valve, 6 in OD
Out of Stock
Anticipated Arrival 1 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF40, with 0.75 in Ball Drain ValveBody size: 6 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 1.6 liter Welded 0.75 in ball valve

Condition: New



Part Number: P108562



Price: $1,207.01




Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW50 KF50, Body size 6 inch OD
Out of Stock
Anticipated Arrival 3 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW50 KF50, Body size 6 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 14.1 B: 6 C: 1.5 D: 4.6 E: 5.1 F: 5 Liquid Nitrogen Reservoir: 1.60 liter Inlet & Outlet Flange Size: KF50

Condition: New



Part Number: P103852



Price: $1,039.56



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW50 KF50, Body size 6 in. OD
Out of Stock
Anticipated Arrival 5 on 2024-05-23


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW50 KF50, Body size 6 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 15.5 B: 6 C: 1.5 D: 8.9 E: 6.6 F: 5 Liquid Nitrogen Reservoir: 1.60 liter Inlet & Outlet Flange Size: KF50

Condition: New



Part Number: P103859



Price: $1,039.56



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF50, 0.75 in Ball Drain Valve, 6 in OD
Out of Stock
Anticipated Arrival 1 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF50, with 0.75 in Ball Drain ValveBody size: 6 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 6 inch OD body trap, 8 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 1.6 liter Welded 0.75 in ball valve

Condition: New



Part Number: P108564



Price: $1,234.92




Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW40 KF40, Body size 8 inch OD
In Stock
5


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 8 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 8 inch OD body trap, 12 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 16.6 B: 8 C: 2 D: 5.6 E: 6.1 E: 6 Liquid Nitrogen Reservoir: 4.00 liter Inlet & Outlet Flange Size: KF40

Condition: New



Part Number: P103854



Price: $1,883.78



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 8 in. OD
In Stock
3


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW40 KF40, Body size 8 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 8 inch OD body trap, 12 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 18 B: 8 C: 2 D: 10.6 E: 7.6 F: 6 Liquid Nitrogen Reservoir: 4.00 liter Inlet & Outlet Flange Size: KF40

Condition: New



Part Number: P103860



Price: $1,883.78



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF40, 1 in Ball Drain Valve, 8 in OD
Out of Stock
Anticipated Arrival 5 on 2024-05-23


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF40, with 1 in Ball Drain ValveBody size: 8 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 8 inch OD body trap, 12 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 4 liter Welded 1 in ball valve

Condition: New



Part Number: P108563



Price: $1,925.64




Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet/Outlet NW50 KF50, Body size 8 inch OD
In Stock
4


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet and Outlet NW50 KF50, Body size 8 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 8 inch OD body trap, 12 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 16.6 B: 8 C: 2 D: 5.6 E: 6.1 F: 6 Liquid Nitrogen Reservoir: 4.00 liter Inlet & Outlet Flange Size: KF50

Condition: New



Part Number: P103853



Price: $1,925.64



Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW50 KF50, Body size 8 in. OD
Out of Stock
Anticipated Arrival 5 on 2024-05-23


Ideal Vacuum Vapor-Pumping Angle Liquid Nitrogen Trap Inlet and Outlet NW50 KF50, Body size 8 inch OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series Angle traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These Angle traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 8 inch OD body trap, 12 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Common Dimensions & Specs: A: 18"B: 8"C: 2" D: 10.6"E: 7.6" F: 6" Liquid Nitrogen Reservoir: 4.00 literInlet & Outlet Flange Size: KF50

Condition: New



Part Number: P103861



Price: $1,925.64




Currency: US Dollar (USD)

Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF50, 1 in Ball Drain Valve, 8 in OD
In Stock
3


Ideal Vacuum Vapor-Pumping In-Line Liquid Nitrogen Trap Inlet KF50, with 1 in Ball Drain ValveBody size: 8 in OD Ideal Vacuum Vapor-Pumping Liquid Nitrogen Traps (LNT) Series In-Line traps are capture type traps that collect condensable gas vapors such as water, solvents, etc. as they are being pumped from the vacuum chamber, but before they can intrude into the mechanical pump. These traps collect vapors by utilizing a refrigerant such as liquid nitrogen and should be the foremost choice in high moisture, condensable effluent applications. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. These traps actually act as a pump producing lower base pressures and faster pump down. These In-Line traps extend the life of the pump; the hydrocarbon fluid, and minimize maintenance issues. The welded ball valve attachment allows for ease of cleaning and the potential recycling of liquid nitrogen. Isolation valves can also be placed between any capture trap and the work chamber. Isolation valves should always be closed to prevent trapped gases from escaping into the work chamber when warming up the trap, during bake-outs, maintenance cycles, etc. The benefits of putting in service the correct In-Line traps are lower ultimate base pressures, cleaner chambers and extended periods of operation. Each trap offers simple reliable operation, along with high efficiency ratings of better than 99% and when correctly employed practically eliminate hydrocarbon back-streaming issues and are valuable additions to any high vacuum system. Features: Refill timetable for 8 inch OD body trap, 12 hours Two piece clamped body design Removable liquid nitrogen reservoir Traps all condensable vapors Stainless Steel type 304 construction, Viton O-Ring Liquid Nitrogen Reservoir: 4 liter Welded 1 in ball valve

Condition: New



Part Number: P108565



Price: $2,091.69




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com