Ideal Vacuum Cube 6 x 6 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard. This is an Ideal Vacuum Cube 6 x 6 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and powder coated blue. It has an internal optical breadboard for mounting test items or fixtures. Blank plates are the least expensive Cube plates and are used for the bottom of Cubes or any other Cube sides where ports are not needed. Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 Vacuum Chamber Plate With One KF-16 (NW-16) Port. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-16 centered bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P104598 or P108101). Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single KF-16 (NW-16) bulkhead port (uses KF-16 bulkhead clamp) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 Vacuum Chamber Plate With Four KF-16 (NW-16) Ports. This is an Ideal Vacuum Cube 6 x 6 inch plate with four KF-16 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P108101 or P104598). Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Quad KF-16 (NW-16) bulkhead ports (uses KF-16 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 Vacuum Chamber Plate With One KF-25 (NW-25) Port. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-25 centered bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single KF-25 (NW-25) bulkhead port (uses KF-25 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 Vacuum Chamber Plate With Two KF-25 (NW-25) Ports. This is an Ideal Vacuum Cube 6 x 6 inch plate with two KF-25 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Dual KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12> 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 Vacuum Chamber Plate With One KF-40 (NW-40) Port. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-40 centered bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600). Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single KF-40 (NW-40) bulkhead port (uses KF-40 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 Vacuum Chamber Plate With One KF-50 (NW-50) Port. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-50 centered bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-50 centering ring (P101245) and bulkhead clamp (P108104 or P104601). Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single KF-50 (NW-50) bulkhead port (uses KF-50 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One ISO-F 63 Port. This is an Ideal Vacuum Cube 6 x 6 inch plate with one ISO-F 63 centered port. The plate is machined from 6061-T6 aluminum and powder coated blue. This ISO-F ported plate has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 6" x 6" plate 6061-T6 aluminum Blue powdercoat One centered ISO-F 63 port with 5/16-18 tapped mounting holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 1.33 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 1.33" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has #8-32 UNC tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 8-32 x 1/2" long, silver-plated, 12 point bolts (P104402). The CF port is not compatible with metal gaskets. Use only Viton seals (P104339). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single CF 1.33" port with #8-32 UNC tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 2.75 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 2.75" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF port is not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single CF 2.75" port with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 3.375 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 3.375" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single CF 3.375" port with 5/16-24 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 4.5 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 4.5" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104343). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Blue powdercoat Single CF 4.5" port with 5/16-24 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.