Ideal Vacuum Cube 9 x 9 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard. This is an Ideal Vacuum Cube 9 x 9 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and powder coated blue. It has an internal optical breadboard for mounting test items or fixtures. Blank plates are the least expensive Cube plates and are used for the bottom of Cubes or any other Cube sides where ports are not needed. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Blank Plate No Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive 9 x 9 Cube plate. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. It has an internal optical breadboard for mounting test items or fixtures. This is the least expensive 9 x 9 Cube plate with an internal optical breadboard. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed, but the ability to fixture components inside the chamber is desired. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Blank Plate No Ports Uncoated 304L Stainless Steel for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch blank plate without ports. The plate is machined from 304L Stainless Steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive 9 x 9 Cube plate. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed. Features: 9 x 9 plate 304L Stainless Steel Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-16 (NW-16) Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-16 bulkhead port\. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P104598 or P108101). Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One KF-16 (NW-16) bulkhead port (uses KF-16 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-16 (NW-16) Ports. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-16 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P108101 or P104598). Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Quad KF-16 (NW-16) bulkhead ports (uses KF-16 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-16 (NW-16) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-16 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P108101 or P104598). Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-16 (NW-16) bulkhead ports (uses KF-16 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-25 (NW-25) Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-25 bulkhead port\. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599).Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One KF-25 (NW-25) bulkhead port (uses KF-25 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-25 (NW-25) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-25 bulkhead port\. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599).Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One KF-25 (NW-25) bulkhead port (uses KF-25 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-25 (NW-25) Ports. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-25 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Quad KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-25 (NW-25) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-25 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599).Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-40 (NW-40) Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-40 bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One KF-40 (NW-40) bulkhead port (uses KF-40 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-40 (NW-40) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-40 bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One KF-40 (NW-40) bulkhead port (uses KF-40 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-40 (NW-40) Ports. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-40 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Quad KF-40 (NW-40) bulkhead ports (uses KF-40 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-40 (NW-40) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-40 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-40 (NW-40) bulkhead ports (uses KF-40 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate with One KF-40 (NW-40), Two KF-25 (NW-25), and Two KF-16 (NW-16) Ports. This is an Ideal Vacuum Cube 9 x 9 inch plate with five KF bulkhead ports, including one KF-40, two KF-25, and two KF-16 ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use standard centering rings and bulkhead clamps. KF-16 uses centering ring (P101242) and bulkhead clamp (P104598 or P108101) KF-25 uses centering ring (P101243) and bulkhead clamp (P108102 or P104599) KF-40 uses centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat (1 ea) KF-40, (2 ea) KF-25, and (2 ea) KF-16 bulkhead ports (uses bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9" Cube frame only.

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-40 (NW-40) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with five KF bulkhead ports, including one KF-40, two KF-25, and two KF-16 ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use standard centering rings and bulkhead clamps. KF-16 uses centering ring (P101242) and bulkhead clamp (P104598 or P108101) KF-25 uses centering ring (P101243) and bulkhead clamp (P108102 or P104599) KF-40 uses centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C (1ea) KF-40, (2 ea) KF-25, and (2ea) KF-16 bulkhead ports (uses bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9" Cube frame only.

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-50 (NW-50) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-50 bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-50 centering ring (P101245) and bulkhead clamp (P108104 or P104601).Features: 9 x 9 plate 6061-T6 aluminum 6061-T6 aluminum Uncoated for bakeout to 150°C One KF-50 (NW-50) bulkhead port (uses KF-50 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-50 (NW-50) Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-50 bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-50 centering ring (P101245) and bulkhead clamp (P108104 or P104601).Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One KF-50 (NW-50) bulkhead port (uses KF-50 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 63 Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered ISO-F 63 port. The plate is machined from 6061-T6 aluminum and powder coated blue. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One ISO-F 63 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 63 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 63 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 63 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 80 Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered ISO-F 80 port. The plate is machined from 6061-T6 aluminum and powder coated blue. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101767). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One ISO-F 80 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 80 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 80 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101767). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 80 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 100 Port. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered ISO-F 100 port. The plate is machined from 6061-T6 aluminum and powder coated blue. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101768). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One ISO-F 100 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 100 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 100 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101768). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 100 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 160 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 160 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104065) and a centering ring with O-ring seal are needed. (P101769). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 160 port with 5/16-18 tapped mounting holes No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 1.33 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 1.33" Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has #8-32 UNC tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 8-32 x 1/2" long, silver-plated, 12 point bolts (P104402). The CF port is not compatible with metal gaskets. Use only Viton seals (P104339). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One CF 1.33" Conflat port with 8-32 UNC tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 1.33 in. Port Uncoated for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 1.33" Conflat port. The plate is machined from 6061 T-6 Aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 8-32 UNC tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 8-32 x 1/2" long, silver-plated, 12 point bolts (P104402). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104339). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061 T-6 Aluminum Uncoated for bakeout to 150°C One CF 1.33" Conflat port with 8-32 UNC tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 2.75 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 2.75" Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat One CF 2.75" Conflat port with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 2.75 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 2.75" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 2.75" Conflat port with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Five Conflat CF 2.75 in. Ports. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with five CF 2.75" Conflat ports. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat ports each require six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Five CF 2.75" Conflat ports with 1/4-28 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 3.375 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one CF 3.375" port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Single CF 3.375" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 3.375 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 3.375" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 3.375" Conflat port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four Conflat CF 3.375 in. Ports. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with four CF 3.375" Conflat ports. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat ports each require eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Quad CF 3.375" ports with 5/16-24 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 4.5 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one CF 6.0" port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104343). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Single CF 4.5" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 4.5 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 4.5" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104343). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 4.5" Conflat port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate with One CF 4.5 in. Port and Two CF 2.75 in. Ports. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one CF 4.5" and two CF 2.75" Conflat ports. The plate is machined from 6061-T6 aluminum and powder coated blue. The plate’s 4.5" CF port has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The 4.5" CF port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250), and uses a Viton seal (P104342). Each of the two CF 2.75" ports have 1/4-28 UNF tapped mounting holes and each port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404) and use Viton seals (P104341). The CF ports are not compatible with metal gaskets. Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Single CF 4.5" port with 5/16-24 UNF tapped holes Dual CF 2.75" ports with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 6.0 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one CF 6.0" port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104345). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 6061-T6 aluminum Blue powdercoat Single CF 6.0" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 6.0 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 6.0" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires This plate’s Conflat port requires sixteen (16) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012251). The CF port is not compatible with metal gaskets. Use only Viton seals (P104345). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 6.0" Conflat port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only