Ideal Vacuum Cube 6 x 12 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard. This is an Ideal Vacuum Cube 6 x 12 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and powder coated blue. It has an internal optical breadboard for mounting test items or fixtures. Blank plates are the least expensive Cube plates and are used for the bottom of Cubes or any other Cube sides where ports are not needed. Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Machinable Blank Plate No Ports Uncoated for Bakeout. This is an uncoated Ideal Vacuum Cube 6 x 12 inch blank plate without ports and without the internal optical breadboard grid found on most other Cube plates. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive 6 x 12 Cube plate of we offer. Use it as is for the bottom of a Cube or any other Cube side where ports are not needed, or customize to your requirements by adding unusual or proprietary ports, for welding on bulkhead fittings, or for custom attachments and fixtures. Note that Ideal Vacuum offers custom Cube plate solutions. Please speak to your representative for a quick quote. Features: 6 x 12 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 12 inch blank plate without ports.The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. It has an internal optical breadboard for mounting test items or fixtures. This is the least expensive 6 x 12 Cube plate with an internal optical breadboard. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed, but the ability to fixture components inside the chamber is desired. Features: 6 x 12 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Machinable Blank Plate No Ports Uncoated Stainless Steel for Bakeout. This is an uncoated Ideal Vacuum Cube 6 x 12 inch blank plate without ports and without the internal optical breadboard grid found on most other Cube plates. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Use this plate as is for the bottom of a Cube or any other Cube side where ports are not needed, or customize to your requirements by adding unusual or proprietary ports, for welding on bulkhead fittings, or for custom attachments and fixtures. Note that Ideal Vacuum offers custom Cube plate solutions. Please speak to your representative for a quick quote. Features: 6 x 12 plate 304L stainless steel Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube, 6x6 Vacuum Chamber Plate With One KF-25 (NW-25) Port. This is an Ideal Vacuum Cube 6 x 12 inch plate with one KF-25 centered bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat One centered KF-25 (NW-25) bulkhead port (uses KF25 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with Three KF-25 (NW-25) Ports. This is an Ideal Vacuum Cube 6 x 12 inch plate with three KF-25 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat Triple KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with One KF-40 (NW-40) Port. This is an Ideal Vacuum Cube 6 x 12 inch plate with one centered KF-40 bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600). Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat One centered KF-40 (NW-40) bulkhead port (uses KF-40 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with Three KF-40 (NW-40) Ports. This is an Ideal Vacuum Cube 6 x 12 inch plate with three KF-40 bulkhead ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600). Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat Triple KF-40 (NW-40) bulkhead ports (uses KF-40 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with Three KF-40 (NW-40) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 12 inch plate with three KF-40 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600). Features: 6" x 12" plate 6061-T6 aluminum Uncoated for bakeout to 150°C Triple KF-40 (NW-40) bulkhead ports (uses KF-40 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with One KF-50 (NW-50) Port, 6061-T6 Aluminum. This is an Ideal Vacuum Cube 6 x 12 inch plate with one KF-50 centered bulkhead port. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-50 centering ring (P101245) and bulkhead clamp (P108104 or P104601). KF-16 uses centering ring (P101242) and bulkhead clamp (P104598 or P108101) KF-25 uses centering ring (P101243) and bulkhead clamp (P108102 or P104599) KF-40 uses centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat One KF-50 port (uses KF-50 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6x12 Vacuum Chamber Plate with One KF-40 (NW-40), One KF-25 (NW-25), and Two KF-16 (NW-16) Ports. This is an Ideal Vacuum Cube 6 x 12 inch plate with four KF bulkhead ports, including one KF-40, one KF-25, and two KF-16 ports. The plate is machined from 6061-T6 aluminum and powder coated blue. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use standard centering rings and bulkhead clamps. KF-16 uses centering ring (P101242) and bulkhead clamp (P104598 or P108101) KF-25 uses centering ring (P101243) and bulkhead clamp (P108102 or P104599) KF-40 uses centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat (1ea) KF-40, (1 ea) KF-25, and (2ea KF-16) bulkhead ports (uses bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate With One ISO-F 63 Port. This is an Ideal Vacuum Cube 6 x 12 inch plate with one centered ISO-F 63 port. The plate is machined from 6061-T6 aluminum and powder coated blue. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat One centered ISO-F 63 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate With Two ISO-F 63 Ports. This is an Ideal Vacuum Cube 6 x 12 inch plate with two ISO-F 63 ports. The plate is machined from 6061-T6 aluminum and powder coated blue. The ISO-F ports have 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat Dual ISO-F 63 ports with 5/16-18 tapped mounting holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with Three Conflat CF 1.33 In. Ports. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with three CF 1.33" centered Conflat ports. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 8-32 UNC tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat ports each require six (6) 8-32 x 1/2" long, silver-plated, 12 point bolts (P104402). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104339). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 12 plate 6061-T6 aluminum Bluie powdercoat Triple CF 1.33" ports with 8-32 UNC tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate With One Conflat CF 2.75 in. Port Uncoated for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with one CF 2.75" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF port is not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat Single CF 2.75" port with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate With Three Conflat CF 2.75 in. Ports. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with three CF 2.75" centered Conflat ports. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat ports each require six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat Triple CF 2.75" ports with 1/4-28 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate With Three Conflat CF 2.75 in. Ports Uncoated for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with three CF 2.75" centered Conflat ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat ports each require six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 12 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Triple CF 2.75" ports with 1/4-28 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate with One Conflat CF 3.375 In. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with one CF 3.375" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat Single CF 3.375" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube 6 x 12 Vacuum Chamber Plate With One Conflat CF 4.5 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 12 inch plate with one CF 4.5" centered Conflat port. The plate is machined from 6061-T6 aluminum and powder coated blue. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104343). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 12 plate 6061-T6 aluminum Blue powdercoat Single CF 4.5" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.