Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale Edwards nEXT300D TStations On Sale Agilent Varian Helium Leak Detectors On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

MKS Granville-Phillips 358 Micro-Ion® Vacuum Gauge Controller, Dual Convectron Card, 115 VAC, 1/2 Rack. PN: 358501-010-T1
In Stock
20


MKS Granville-Phillips® 358 Micro-Ion® Vacuum Gauge Controller, Dual Convectron Card, Torr, 115 VAC, 1/2 Rack. MKS Granville-Phillips® Part Number: 358501-010-T1. This MKS Granville-Phillips® half-rack, model 358 Micro-Ion® high vacuum gauge controller is set up to operate a Micro-Ion® gauge and a single convectron gauge. This 358 Micro-Ion® Controller is capable of measuring from a lower limit in the 10-10 range to 5x10-2 torr. Pressure measurements are extended to Atmosphere with the Dual Convectron® Vacuum Gauge card. Additional convectron control cards can be ordered to operate an additional convectron sensor. This 358 controller configuration is made to run on 115 VAC. Pressure readout is via three front panel displays, analog output, and available computer interface. The Micro-Ion® gauge measures ultra high vacuum pressure from 5x10-2 to 10-10 torr while convectron sensors are typically used to measure roughing line vacuum pressure from atmosphere to 10-4 torr. Cables and ion gauge tubes are available and sold separately.

Condition: New



Part Number: P1011910



Price: $2,381.40




Currency: US Dollar (USD)

MKS Granville-Phillips 358 Micro-Ion® Vacuum Gauge Controller, Dual Convectron Card, 240 VAC, 1/2 Rack. PN: 358501-010-T2
In Stock
20


MKS Granville-Phillips 358 Micro-Ion Vacuum Gauge Controller, Dual Convectron Card, 240 VAC, 1/2 Rack. MKS Granville Phillips Part Number: 358501-010-T2. This MKS Granville-Phillips half-rack, model 358 Micro-Ion® high vacuum gauge controller is set up to operate a Micro-Ion® gauge and a single convectron gauge. Additional convectron control cards can be ordered to operate an additional convectron sensor. This 358 controller configuration is made to run on 240 VAC. Pressure readout is via three front panel displays, analog output, and available computer interface. The Micro-Ion® gauge measures ultra high vacuum pressure from 5x10-2 to 10-10 Torr while convectron sensor(s) are typically used to measure roughing line vacuum pressure from atmosphere to 10-4 Torr. Please call to check availability and get pricing options for other configurations of the MKS Granville-Phillips 358 micro-ion® and Convectron gauge controller. Cables and ion gauge tubes are available and sold separately. Specs and Operation Manual can be downloaded below.

Condition: New



Part Number: P1011703



Price: $2,362.50




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, 3/4 inch Tube Port. PN: 355001-TA
In Stock
2


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, 3/4 inch Tube Port, Stainless Steel Encased. MKS Granville Phillips Part Number: 355001-TA The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011926



Price: $458.73




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, 3/4 inch Tube Port. PN: 355001-YA
In Stock
5


MKS Granville-Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, Stainless Steel Encased, 3/4 inch Tube Port. MKS Granville Phillips Part Number: 355001-YA The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011933



Price: $482.82




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Vacuum Gauge, w/ Dual Tungsten Filament 1.0 inch Port Compression. PN: 355001-TJ
In Stock
2


MKS Granville-Phillips 355 Micro-Ion Vaccum Gauge, Dual Yttria-Coated Iridium Filament, CF 1.33 in. (UHV Range). MKS Granville-Phillips Part Number: 355001-TJ. This is a Micro-Ion Gauge with a 1.0 in. compression port mount and dual tungsten filaments. The Micro-Ion gauge is the world’s smallest ionization gauge and occupies less than 10% of the volume of a conventional glass gauge or nude gauge, allowing for easy installation in complex, tightly packed vacuum systems. With a high performance, patented, dual ion collector design which increases electron path length and ion collection efficiency, this gauge provides high performance in a small volume. The dual filaments and grid windings that are attached to the grid posts every 180° increase sensitivity, long-term stability and long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. At only 8% of the power consumption of a traditional glass or nude gauge, these Micro-Ion gauges run cooler and generate significantly less heat-related process or experiment disturbances. The built-in port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. These gauges have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gauges are available in many port options, making installation very simple in your vacuum system. Works with MKS Granville-Phillips 358 Micro-Ion gauge vacuum controller models. Benefits of the Micro Ion Gauge: World’s Smallest Ion Gauge-only 10% the size of conventional glass gauges Only 8% of the Power Consumption of Traditional Glass or Nude Gauges High Performance Long Term Stability Long Gauge Life Dual Filaments Cooler Operation Built-In Port Shield All Metal Enclosure Wide Selection of Port Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011920



Price: $549.06




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Vacuum Gauge, Dual Yttria-coated Iridium Filaments, 1.0 inch Port Compression. PN: 355001-YJ
In Stock
2


MKS Granville-Phillips 355 Micro-Ion Vacuum Gauge, Dual Yttria-Coated Iridium Filament, CF 1.33 in. (UHV Range). MKS Granville-Phillips Part Number: 355001-YJ. This is a Micro-Ion Gauge with a 1.0 in. compression port mount and Yttria coated Irridium filaments. The Micro-Ion gauge is the world’s smallest ionization gauge and occupies less than 10% of the volume of a conventional glass gauge or nude gauge, allowing for easy installation in complex, tightly packed vacuum systems. With a high performance, patented, dual ion collector design which increases electron path length and ion collection efficiency, this gauge provides high performance in a small volume. The dual filaments and grid windings that are attached to the grid posts every 180° increase sensitivity, long-term stability and long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. At only 8% of the power consumption of a traditional glass or nude gauge, these Micro-Ion gauges run cooler and generate significantly less heat-related process or experiment disturbances. The built-in port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. These gauges have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gauges are available in many port options, making installation very simple in your vacuum system. Works with MKS Granville-Phillips 358 Micro-Ion gauge vacuum controller models. Benefits of the Micro Ion Gauge: World’s Smallest Ion Gauge-only 10% the size of conventional glass gauges Only 8% of the Power Consumption of Traditional Glass or Nude Gauges High Performance Long Term Stability Long Gauge Life Dual Filaments Cooler Operation Built-In Port Shield All Metal Enclosure Wide Selection of Port Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011921



Price: $523.27




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, NW KF-16 Vacuum Fitting. PN: 355001-TD
In Stock
2


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, NW KF-16 Fitting, Stainless Steel Encased. MKS Granville Phillips Part Number: 355001-TD The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011927



Price: $503.36




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Filaments, NW KF-16 Vacuum Fitting. PN: 355001-YD
In Stock
2
Expecting 2
Anticipated Arrival 2 on 2024-07-12


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Filaments, NW KF-16 Fitting, Stainless Steel Encased. MKS Granville Phillips Part Number: 355001-YD The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011935



Price: $503.36




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, KF-25 Vacuum Fitting. PN: 355001-TE
In Stock
2


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, Stainless Steel Encased, KF-25 Fitting. MKS Granville Phillips Part Number: 355001-TE The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011929



Price: $513.14




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, KF-25 Fitting. PN: 355001-YE
In Stock
25


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, Stainless Steel Encased, KF-25 Fitting. MKS Granville Phillips Part Number: 355001-YE The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011205



Price: $549.06




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, NW KF-40 Fitting. PN: 355001-TK
In Stock
2


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, NW KF-40 Vacuum Fitting, Stainless Steel Encased. MKS Granville Phillips Part Number: 355001-TK The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011932



Price: $531.05




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, 1/2 inch Male 8 VCR Fitting. PN: 355001-TH
In Stock
2


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Tungsten Filaments, 1/2 inch Male 8 VCR Vacuum Fitting. MKS Granville Phillips Part Number: 355001-TH The World’s Smallest Ionization Gauge. The Micro-Ion gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011931



Price: $540.71




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, NW KF-40 Fitting. PN: 355001-YK
In Stock
4


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, NW KF-40 Vacuum Fitting, Stainless Steel Encased. MKS Granville Phillips Part Number: 355001-YK The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011936



Price: $531.05




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, 1/2 inch Male 8 VCR Fitting. PN: 355001-YH
In Stock
2


MKS Granville Phillips 355 Micro-Ion Bayard-Alpert Hot Cathode Vacuum Gauge, Dual Yttria-Coated Iridium Filaments, 1/2 inch Male 8 VCR Fitting. MKS Granville Phillips Part Number: 355001-YH The World’s Smallest Ionization Gauge. The Micro-Ion gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011934



Price: $568.22




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Vacuum Gauge, (UHV Range) w/ Dual Tungsten Filament CF 1.33 in. PN: 355001-TF
In Stock
2


MKS Granville-Phillips 355 Micro-Ion Vaccum Gauge, Dual Yttria-Coated Iridium Filament, CF 1.33 in. (UHV Range). MKS Granville-Phillips Part Number: 355001-TF. This is a Micro-Ion Gauge with a CF 1.33 in. mount and dual tungsten filaments. The Micro-Ion gauge is the world’s smallest ionization gauge and occupies less than 10% of the volume of a conventional glass gauge or nude gauge, allowing for easy installation in complex, tightly packed vacuum systems. With a high performance, patented, dual ion collector design which increases electron path length and ion collection efficiency, this gauge provides high performance in a small volume. The dual filaments and grid windings that are attached to the grid posts every 180° increase sensitivity, long-term stability and long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. At only 8% of the power consumption of a traditional glass or nude gauge, these Micro-Ion gauges run cooler and generate significantly less heat-related process or experiment disturbances. The built-in port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. These gauges have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gauges are available in many port options, making installation very simple in your vacuum system. Works with MKS Granville-Phillips 358 Micro-Ion gauge vacuum controller models. Benefits of the Micro Ion Gauge: World’s Smallest Ion Gauge-only 10% the size of conventional glass gauges Only 8% of the Power Consumption of Traditional Glass or Nude Gauges High Performance Long Term Stability Long Gauge Life Dual Filaments Cooler Operation Built-In Port Shield All Metal Enclosure Wide Selection of Port Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011912



Price: $523.27




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Vacuum Gauge, Dual Yttria-Coated Iridium Filament, CF 1.33 in. (UHV Range). PN: 355001-YF
In Stock
3
Expecting 1
Anticipated Arrival 1 on 2024-07-12


MKS Granville-Phillips 355 Micro-Ion Vaccum Gauge, Dual Yttria-Coated Iridium Filament, CF 1.33 in. (UHV Range). MKS Granville-Phillips Part Number: 355001-YF. This is a Micro-Ion Gauge with a Conflat CF 1.33 in. mount. The Micro-Ion gauge is the world’s smallest ionization gauge and occupies less than 10% of the volume of a conventional glass gauge or nude gauge, allowing for easy installation in complex, tightly packed vacuum systems. With a high performance, patented, dual ion collector design which increases electron path length and ion collection efficiency, this gauge provides high performance in a small volume. The dual filaments and grid windings that are attached to the grid posts every 180° increase sensitivity, long-term stability and long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. At only 8% of the power consumption of a traditional glass or nude gauge, these Micro-Ion gauges run cooler and generate significantly less heat-related process or experiment disturbances. The built-in port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. These gauges have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gauges are available in many port options, making installation very simple in your vacuum system. Works with MKS Granville-Phillips 358 Micro-Ion gauge vacuum controller models. Benefits of the Micro Ion Gauge: World’s Smallest Ion Gauge-only 10% the size of conventional glass gauges Only 8% of the Power Consumption of Traditional Glass or Nude Gauges High Performance Long Term Stability Long Gauge Life Dual Filaments Cooler Operation Built-In Port Shield All Metal Enclosure Wide Selection of Port Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011937



Price: $549.06




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Vacuum Gauge, (UHV Range) w/ Dual Tungsten Filament CF 2.75 in. PN: 355001-TG
Out of Stock
Expecting 2
Anticipated Arrival 2 on 2024-08-13


MKS Granville-Phillips 355 Micro-Ion Vaccum Gauge, Dual Yttria-Coated Iridium Filament, CF 1.33 in. (UHV Range). MKS Granville-Phillips Part Number: 355001-TG. This is a Micro-Ion Gauge with a Conflat CF 2.75 in. mount. The Micro-Ion gauge is the world’s smallest ionization gauge and occupies less than 10% of the volume of a conventional glass gauge or nude gauge, allowing for easy installation in complex, tightly packed vacuum systems. With a high performance, patented, dual ion collector design which increases electron path length and ion collection efficiency, this gauge provides high performance in a small volume. The dual filaments and grid windings that are attached to the grid posts every 180° increase sensitivity, long-term stability and long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. At only 8% of the power consumption of a traditional glass or nude gauge, these Micro-Ion gauges run cooler and generate significantly less heat-related process or experiment disturbances. The built-in port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. These gauges have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gauges are available in many port options, making installation very simple in your vacuum system. Works with MKS Granville-Phillips 358 Micro-Ion gauge vacuum controller models. Benefits of the Micro Ion Gauge: World’s Smallest Ion Gauge-only 10% the size of conventional glass gauges Only 8% of the Power Consumption of Traditional Glass or Nude Gauges High Performance Long Term Stability Long Gauge Life Dual Filaments Cooler Operation Built-In Port Shield All Metal Enclosure Wide Selection of Port Fittings MKS 355 Micro-Ion gauges are available with these fittings:

Condition: New



Part Number: P1011918



Price: $568.62




Currency: US Dollar (USD)

MKS Granville Phillips 355 Micro-Ion Vacuum Gauge, (UHV Range) Dual Yttria-coated Iridium Filaments CF 2.75 in. PN: 355001-YG
In Stock
19


MKS Granville Phillips 355 Micro-Ion Vaccum Gauge, (UHV Range) Dual Yttria-coated Iridium Filaments CF 2.75 in. MKS Granville Phillips Part Number: 355001-YG The World’s Smallest Ionization Gauge. The Micro-Ion Gauges occupy less than 10% of the volume of conventional glass gauge or nude gauges, allowing easy installation in complex, tightly packed vacuum systems. With high performance patented dual ion collector design increasing electron path length and ion collection efficiency providing high performance in a small volume. Having long term stability, the grid windings are attached to the grid posts every 180° for greater sensitivity and stability. The dual filaments helps provide long gauge life. Unscheduled downtime is avoided by using the second filament as a back-up until the gauge can be replaced during regular maintenance procedures. These gauges have cooler operation, at only 8% of the power consumption of a traditional glass or nude gauge, the Micro-Ion Gauge generates significantly less heat-related process or experiment disturbances. Port shield protects the electrode assembly from damage during assembly or vacuum chamber maintenance, and provides a stable electrical environment for improved measurement performance. They have all-metal enclosures which prevents grid and filament damage during mounting and eliminates the risk of glass breakage. These gagues come with a wide selection of vacuum fittings, making installation very simple in your vacuum systems. Works with Vacuum Controller: MKS Granville Phillips Models 358 Micro-Ion Gauge Vacuum Controller.Benefits of the Micro Ion Gauges: World’s Smallest Ion Gauge High Performance Long Term Stability Dual Filaments Cooler Operations Port Shields All Metal Enclosure Wide Selection of Vacuum Fittings

Condition: New



Part Number: P1011919



Price: $568.22




Currency: US Dollar (USD)

MKS Granville Phillips Micro-Ion Gauge Cable, Connects 355 Hot Cathode Gauge To 358 Contrroller, 10ft Long. PN: 358011-10
In Stock
79


MKS Granville Phillips Micro Ion Gauge Cable, Connects 355 Gauge To 358 Contrroller, 10ft Long. MKS Granville Phillips Part Number: 358011-10. These ion gauge cables connect the MKS Granville Phillips 358 gauge controller to one 355 micro ion Bayard-Alpert gauge tube. These cables are 10 ft. (3m) long and are replacements for the MKS Granville Phillips part number 358011-10. Ion gauge controllers, ion gauge tubes, and thermocouple sensors are also available, sold separately.

Condition: New



Part Number: P102069



Price: $504.09




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro Ion Gauge Cable, 25 ft Long. PN: 358011-25
In Stock
1


MKS Granville Phillips 358 Micro Ion Gauge Cable, 25 ft Long. MKS Granville Phillips Part Number: 358011-25. These ion gauge cables connect the MKS Granville Phillips 358 micro ion gauge controller to one micro ion gauge tube. These cable are 25ft long and are replacements for the MKS Granville Phillips part number 358011-25. Ion gauge controllers, ion gauge tubes, and thermocouple sensors are also available but sold separately.

Condition: New



Part Number: P1011916



Price: $1,692.38




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro Ion Gauge Cable, 50ft Long. PN: 358011-50
In Stock
1


MKS Granville Phillips 358 Micro Ion Gauge Cable, 50ft Long. MKS Granville Phillips Part Number: 358011-50 These ion gauge cables connect the MKS Granville Phillips 358 micro ion gauge controller to one micro ion gauge tube. These cable are 50ft long and are replacements for the MKS Granville Phillips part number 358011-50. Ion gauge controllers, ion gauge tubes, and thermocouple sensors are also available but sold separately.

Condition: New



Part Number: P1011859



Price: $1,425.96




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro-Ion Gauge Controller, DUAL Convectron Interface Card. PN: 358002
In Stock
1
Expecting 1
Anticipated Arrival 1 on 2024-07-12


MKS Granville Phillips 358 Micro-Ion Gauge Controller, DUAL Convectron Interface Card. MKS Granville Phillips Part Number: 358002 This is a MKS Granville Phillips Dual Convectron interface card for the 358 Micro-Ion Gauge Controller.

Condition: New



Part Number: P1011964



Price: $1,110.24




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 1/8 MNPT. PN: 275071
In Stock
351


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 1/8 Male NPT MKS Granville Phillips Part Number 275071 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).

Condition: New



Part Number: P101660



Price: $270.18




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 8 VCR 1/2 inch. PN: 275282
In Stock
27


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 8 VCR 1/2 inch flange MKS Granville Phillips Part Number: 275282 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller is replaced by the MKS Granville Phillips 475, not included).

Condition: New



Part Number: P102685



Price: $376.76




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 1.33 inch. PN: 275256
In Stock
10


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 1.33 flange MKS Granville Phillips Part Number: 275256 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).

Condition: New



Part Number: P102578



Price: $327.69




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 2.75 inch PN: 275238
In Stock
30


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 2.75 inch MKS Granville Phillips Part Number: 275238 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).

Condition: New



Part Number: P102684



Price: $357.33




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 4 VCR 1/4 inch. PN: 275185
In Stock
76
Expecting 1
Anticipated Arrival 1 on 2024-06-20


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 1/4 inch Female 4 VCR Fitting MKS Granville Phillips Part Number: 275185 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is not avaliable and is replaced with the MKS Granville Phillips 475).

Condition: New



Part Number: P102686



Price: $319.19




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 25. PN: 275196
In Stock
101


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 25 Flange MKS Granville Phillips Part Number: 275196 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).

Condition: New



Part Number: P102579



Price: $327.69




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 16. PN: 275203
In Stock
77


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 16 Flange MKS Granville Phillips Part Number: 275203 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).

Condition: New



Part Number: P102687



Price: $308.51




Currency: US Dollar (USD)

MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 40. PN: 275316
In Stock
31


MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 40 Flange MKS Granville Phillips Part Number: 275316 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).

Condition: New



Part Number: P102580



Price: $385.21




Currency: US Dollar (USD)

MKS Granville Phillips Dual Convectron Cable Connects 307, 350 & 358 Ion Gauge Controllers to 275 Gauge Tubes, 10 ft. PN: 303040-10
In Stock
208


MKS Granville Phillips 303, 307, 316, 333, 340, 350, 358 & 360 Dual Convectron Gauge Cable, 10ft Long. MKS Granville Phillips Part Number: 303040-10. These ion gauge cables connect the MKS Granville Phillips 303, 307, 316, 333, 340, 350, 358 & 360 ion gauge controllers to two MKS Granville Phillips 275 convectron gauge tubes. These cable are 10ft long and are replacements for the MKS Granville Phillips part number 303040-10. Ion gauge controllers, ion gauge tubes, and convectron sensors are also available but sold separately.

Condition: New



Part Number: P102682



Price: $215.34




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro-Ion Gauge Controller, 2 Setpoint Relays Process Control Interface Card. PN: 358004
In Stock
2


MKS Granville Phillips 358 Micro-Ion Gauge Controller, 2 Setpoint Relays Process Control Interface Card MKS Granville Phillips Part Number: 358004 This is a MKS Granville Phillips Process Control Interface Card with 2 setpoint relays for the 358 Micro-Ion Gauge Controller.

Condition: New



Part Number: P1012055



Price: $606.99




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro-Ion Gauge Controller, RS485/422 Interface Card. PN: 358006
In Stock
2


MKS Granville Phillips 358 Micro-Ion Gauge Controller, RS485/422 Interface Card. MKS Granville Phillips Part Number: 358006 This is a MKS Granville Phillips RS485/422 interface card for the 358 Micro-Ion Gauge Controller.

Condition: New



Part Number: P1011915



Price: $807.52




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro-Ion Gauge Controller RS232 Interface Card. PN: 358007
Out of Stock
Expecting 7
Anticipated Arrival 2 on 2024-05-10


MKS Granville Phillips 358 Micro-Ion Gauge Controller RS232 Interface Card. MKS Granville Phillips Part Number: 358007 This is a MKS Granville Phillips 358 Micro-Ion Gauge Controller RS232 Interface Card.

Condition: New



Part Number: P1011838



Price: $851.21




Currency: US Dollar (USD)

MKS Granville Phillips 358 Micro-Ion Gauge Controller, 6 Setpoint Relays Process Control Interface Card. PN: 358003
Out of Stock
Expecting 3
Anticipated Arrival 1 on 2024-06-14


MKS Granville Phillips 358 Micro-Ion Gauge Controller, 6 Setpoint Relays Process Control Interface Card. MKS Granville Phillips Part Number: 358003 This is a MKS Granville Phillips Process Control Interface Card with 6 setpoint relays for the 358 Micro-Ion Gauge Controller.

Condition: New



Part Number: P1011917



Price: $888.08




Currency: US Dollar (USD)

MKS Granville Phillips Set of (2) Rack Ears to Mount 358 Micro-Ion Vacuum Gauge Controller Centered in Standard EIA 19 inch Rack. PN 370011
In Stock
7
Expecting 13
Anticipated Arrival 6 on 2024-06-28


MKS Granville Phillips set of (2) Rack Ears to Mount MKS Granville Phillips 358 Micro-Ion Vacuum Gauge Controller Centered in Standard EIA 19 inch Rack. MKS Granville Phillips Part Number: 370011 This is a pair of rack ears which allows you to mount the 1/2 rack MKS Granville Phillips 358 Controller into a standard 19 inch rack.

Condition: New



Part Number: P1011914



Price: $150.53




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com