Ideal Vacuum Cube Hardware Kit For 6 x 6 x 12 Chamber, Includes O-rings And Plate Mounting Screws. This Ideal Vacuum Cube hardware kit is needed when constructing a 6 x 6 x 12 chamber. The 6 x 6 x 12 Cube frame takes four 6" x 12" and two 6" x 6" plates to complete it (P107541). This kit includes O-rings for all the plates and the 1/4"-20 x 5/16" long stainless steel socket head cap screws (SHCS) needed to mount the plates on the frame. O-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. This kit also includes a complete spare set of four 6" x 12" and two 6" x 6" Cube plate O-rings, and 12 spare plate mounting screws. This 6 x 6 x 12 Cube hardware kit includes: (8 ea) Viton O-ring for 6 x 12 Cube Plate, P108339 (includes 4 spares) (4 ea) Viton O-ring for 6 x 6 Cube Plate, P107295 (includes 2 spares) (76 ea) 1/4"-20 x 5/16" long SHCS screws for plate mounting, P1013341 (includes 16 spares) Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Replacement Viton O-ring for Sealing 6 x 12 in. Vacuum Cube Plates. These replacement Viton O-rings are used to make the seal between a 6 x 12" Ideal Vacuum Cube plate and frame. These O-ring seals are installed on the inner sealing groove of the plate. They are made of Viton and can withstand temperatures between -26°C and 150°C without permanent deformation. Chambers sealed with Viton O-rings can achieve vacuum in the 10-8 Torr range (high vacuum).

Ideal Vacuum Cube Replacement Silicone O-ring for Sealing 6 x 12 in. Vacuum Cube Plates. These replacement Silicone O-rings are used to make the seal between a 6 x 12" Ideal Vacuum Cube plate and frame. These O-ring seals are installed on the inner sealing groove of the plate. They are made of Silicone and can withstand temperatures between -54°C and 204°C without permanent deformation. Chambers sealed with Silicone O-rings can achieve vacuum in the 10-8 Torr range (high vacuum).

Ideal Vacuum Cube Replacement Silicone O-ring for Sealing Glove Box 6 x 12 in. Adapter Plate Assembly. These replacement Silicone O-rings are used to seal the glove box 6 x 12 adapter plate assembly to a glove box. Note: These O-rings are not for sealing a 6 x 12" vacuum Cube plate to a Cube frame. These o-ring seals are installed on the inner sealing groove of the outside glove box adapter assembly plate. They are made of Silicone and can withstand temperatures between -54°C and 204°C without permanent deformation. Chambers sealed with Silicone O-rings can achieve vacuum in the 10-8 Torr range (high vacuum).

Ideal Vacuum Cube Replacement Viton O-ring for Sealing 6 x 6 in. Vacuum Cube Plates. These replacement Viton O-rings are used to make the seal between a 6 x 6" Ideal Vacuum Cube plate and frame. These O-ring seals are installed on the inner sealing groove of the plate. They are made of Viton and can withstand temperatures between -26°C and 150°C without permanent deformation. Chambers sealed with Viton O-rings can achieve vacuum in the 10-8 Torr range (high vacuum).

Ideal Vacuum Cube Replacement Silicone O-ring for Sealing 6 x 6 in. Vacuum Cube Plates. These replacement Silicone O-rings are used to make the seal between a 6 x 6" Ideal Vacuum Cube plate and frame. These O-ring seals are installed on the inner sealing groove of the plate. They are made of Silicone and can withstand temperatures between -54°C and 204°C without permanent deformation. Chambers sealed with Silicone O-rings can achieve vacuum in the 10-8 Torr range (high vacuum).

O-Ring Removal Tool, Non Scratch Polycarbonate, Keeps O-Ring Seals and Grooves from Damage This O-ring removal tool, made of non scratch, tough polycarbonate plastic, allows you to remove O-rings from the groove without damaging either the O-ring seal or the groove. This 5-1/2" long, nearly unbreakable tool has a prying tip on one end, and a hook on the other which allows you to remove even the most stubborn O-rings, even in hard-to-reach places. This tool is a must have in your toolbox! We recommended it for installation, maintenance and service on the Ideal Vacuum Cube modular chamber system, or with any vacuum component. Note: Color may vary.

Ideal Vacuum Cube Viewing Window Assembly Maintenance and Service Tool Kit This simple toolkit includes a 9/64" hex key wrench and an O-ring removal tool. It is a perfect little tool kit for maintaining and servicing ALL Ideal Vacuum Cube Viewing Window Assemblies; 6x6, 6x12, 9x9 and 12x12. Use it when disassembling the standard glass for cleaning, for periodic tightening, when replacing the O-ring window pane seal, or when replacing the standard tempered glass with fused quartz or fused silica material. This is a simple yet essential tool kit for maintaining and servicing the Ideal Vacuum Cube Viewing Window Assembly. Please see our other tool kits for a Cube plate mounting tool kit, or for our complete Cube maintenance and service tool kit which has all the tools needed for proper Cube assembly, disassembly, maintenance and repair.

Ideal Vacuum Cube Plate Maintenance and Service Tool Kit This simple and inexpensive toolkit includes a 3/16" hex key wrench and an O-ring removal tool. It is a perfect little tool kit for installing, maintaining and servicing ALL Ideal Vacuum Cube side or door plates, whether they be ported or not. Use these essential tools when mounting sides to the Cube, or when replacing O-ring seals. These tools work for all 6x6, 6x12, 9x9 and 12x12 Cubes; rectangular, hexagonal or octagonal chambers. Please see our other tool kits for a complete essential Cube maintenance and service tool kit, which has all the tools needed for proper Cube assembly, disassembly, maintenance and repair.

Ideal Vacuum Cube Essential Maintenance and Service Tool Kit This tool kit has everything you need to assemble, disassemble, maintain, service and repair all Ideal Vacuum Cube modular chambers. Includes: 13 pc. Hex key wrench set (inch sizes from 0.050" to 3/8", U.S.A) 7/16" polished combination wrench (for Cube coupling) O-Ring Removal Tool (non scratch polycarbonate, for all O-ring seals) 2 pair of Large Nitrile gloves (use when working on any vacuum component) We’ve gathered all the essential tools you need and packaged them in their own snap close polypropylene box that fits comfortably in your vacuum service tool box, or a desk drawer. Use these essential tools when assembling or installing a Cube for the first time, or when performing routine maintenance, cleaning, and seal replacement. These tools work for all 6x6, 6x12, 9x9 and 12x12 Cubes; rectangular, hexagonal or octagonal chambers, and all accessories that use hex head bolts or screws for attachment to the Cube system (valves, flanges, etc.). This inexpensive tool kit is a must have for all Ideal Vacuum Cube modular chamber system users. Dimensions: 8-3/8" x 3-5/8" x 2". Color may vary.