Edwards 0.7 E2M0.7 Rotary Vane Dual Stage Mechanical Vacuum Pump, 115 VAC 1 ph. Edwards Part Number: A37141902. The Edwards 0.7 E2M0.7 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 0.7 E2M0.7 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications Include use with Refrigeration dehydration, Brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 0.7 E2M0.7 vacuum pumps have a pumping speed displacement at 60Hz of 0.5 CFM and an ultimate pressure of 1.1 X 10 -3 Torr. These Edwards 0.7 E2M0.7 Rotary Vane Mechanical Vacuum Pumps with Edwards part number A37141902.

Edwards 1.5 E2M1.5 Rotary Vane Dual Stage Mechanical Vacuum Pumps, 115 VAC. Edwards Part Number A37132902. The Edwards 1.5 E2M1.5 dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pumping speed. The Edwards 1.5 E2M1.5 has superior vapor handling capabilities, while operating quietly. They are very reliable and have accessories to match any application. Applications Include use with Refrigeration dehydration, Brake line evacuation, Epoxy degassing, Sterilization, Mass spectrometry, Vacuum ovens, Lasers, Backing combinations, Thin film coating, Vacuum distillation, Freeze drying, Space research and other vacuum processes. The Edwards 1.5 E2M1.5 vacuum pumps have a pumping speed displacement at 60Hz of 1.2 CFM and an ultimate pressure of 1.1 X 10 -3 Torr. These Edwards 1.5 E2M1.5 Rotary Vane Mechanical Vacuum Pumps has Edwards Product Number A37132902.

Edwards mXDS3 Compact Dry Scroll Vacuum Pump, 1-Phase 115 VAC, 2 CFM pumping speed, 75 mTorr Ultimate Pressure. Edwards Part Number: A74401906. This new mXDS3 dry scroll pump delivers a 2.0 CFM (3.3 m3h-1) maximum pumping speed together with an ultimate pressure of 75 mTorr making it well suited for backing turbomolecular pumps. The mXDS3 version is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve, featuring delayed opening, and supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for the main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. The Edwards mXDS3 is a small dry alternative to oil-sealed rotary vane and diaphragm vacuum pumps of a similar capacity. The mXDS3s version offers, as standard, configured with an inlet valve accessory and exhaust silencer/filter. The compact and lightweight mXDS3 weighs in at just 17.2 lbs. (7.8 kg.) and comes with a carrying handle making it highly portable. For system builders, the pump can typically be mounted horizontally or vertically, the inlet connection can also be reconfigured to flow vertically or horizontally with a push fit connector that is sold as an accessory. The Edwards mXDS3 and mXDS3s compact dry scroll pumps deliver 2 CFM (3.3 m3h-1) peak pumping speed and 75 mTorr ultimate pressure. In comparison with other compact pumps, its high pumping speed and good ultimate vacuum make the mXDS well suited for backing turbomolecular pumps. These small scroll pumps have a gas ballast facility incorporated in the design as standard for water vapor handling and an internal exhaust valve just like the larger nXDS pumps. The Edwards mXDS3 and mXDS3s are clean oil-free pumps with no oil to top up, replace or dispose of. They typically have a lower power requirement compared to similar capacity pumps making them great for energy savings, an ideal choice for helping to reduce your carbon footprint. The optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment. APPLICATIONSGeneral clean pumping applications Scanning Electron Microscopes - SEM Beam lines and high energy physics Mass Spectrometry Electron Microscopy Sample Preparation Research and Development High Energy Physics Industrial Semiconductor Backing turbo pumps Centrifuges, ultra-high speed Coating Cryogenics Degassing/curing - oil, epoxy resin Distillation/extraction/filtration Laboratory bench top vacuum Lasers, gas recovery and recirculation Research and development Surface science instruments

Edwards mXDS3s Compact Dry Scroll Vacuum Pump, Preconfigured Version with Inlet Valve and Exhaust Silencer Included1-Phase 115 VAC, 2 CFM pumping speed, 75 mTorr Ultimate Pressure. Edwards Part Number: A74402906. This new mXDS3s dry scroll pump delivers a 2.0 CFM (3.3 m3h-1) maximum pumping speed together with an ultimate pressure of 75 mTorr making it well suited for backing turbomolecular pumps. This is the mXDS3s preconfigured version which comes factory fitted with an inlet valve, featuring delayed opening, and supplied with an exhaust silencer. The mXDS3 version is the standard option supplied with no inlet valve. Both offer the same vacuum performance and feature an IEC connector for the main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. The Edwards mXDS3 is a small dry alternative to oil-sealed rotary vane and diaphragm vacuum pumps of a similar capacity. The mXDS3s version offers, as standard, configured with an inlet valve accessory and exhaust silencer/filter. The compact and lightweight mXDS3 weighs in at just 17.2 lbs. (7.8 kg.) and comes with a carrying handle making it highly portable. For system builders, the pump can typically be mounted horizontally or vertically, the inlet connection can also be reconfigured to flow vertically or horizontally with a push fit connector that is sold as an accessory. The Edwards mXDS3 and mXDS3s compact dry scroll pumps deliver 2 CFM (3.3 m3h-1) peak pumping speed and 75 mTorr ultimate pressure. In comparison with other compact pumps, its high pumping speed and good ultimate vacuum make the mXDS well suited for backing turbomolecular pumps. These small scroll pumps have a gas ballast facility incorporated in the design as standard for water vapor handling and an internal exhaust valve just like the larger nXDS pumps. The Edwards mXDS3 and mXDS3s are clean oil-free pumps with no oil to top up, replace or dispose of. They typically have a lower power requirement compared to similar capacity pumps making them great for energy savings, an ideal choice for helping to reduce your carbon footprint. The optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment. APPLICATIONSGeneral clean pumping applications Scanning Electron Microscopes - SEM Beam lines and high energy physics Mass Spectrometry Electron Microscopy Sample Preparation Research and Development High Energy Physics Industrial Semiconductor Backing turbo pumps Centrifuges, ultra-high speed Coating Cryogenics Degassing/curing - oil, epoxy resin Distillation/extraction/filtration Laboratory bench top vacuum Lasers, gas recovery and recirculation Research and development Surface science instruments

Ideal Vacuum XactGauge Convection-Enhanced Pirani Gauge Kit, XGC-320 Controller, XGC-321 KF-16 Gauge, 10 ft. Sensor Cable, PS, 2 Set Points Complete Kit Includes: XactGauge XGC-320 Convection-Enhanced Controller, XGC-321 KF-16 Sensor Gauge, 3 m (10 ft.) Sensor Cable & Power Supply. Features: Inexpensive solution for Pirani type thermal conductivity gauges Convection-Enhanced Pirani sensor gauges available in 8 different flange sizes Accurate pressure measurements from 1x10-4 to 1000 Torr Compact 1/8-DIN package fits on bench or in instrument panel cutout Bright, easy to read, 4 digit OLED display Intuitive front panel controls for calibration and parameter adjustments Switch between Torr, mBar and Pa units quickly Serial RS232/RS485 DB9 I/O interface for remote control 2 set points 4 analog outputs Compatible with Granville-Phillips® 275 Convectron® and Inficon PGE050 Pirani Gauge Enhanced sensors and cables. The Ideal Vacuum XactGauge XGC-320 Convection Enhanced Pirani Gauge Controller is an inexpensive solution for simple readout of Pirani type thermal conductivity gauges with added features for ease of use and system integration. Use with any of our eight (8) XactGauge Enhanced Pirani Sensor Gauges to obtain accurate pressure measurements ranging from 1x10-4 to 1000 Torr. Our XactGauge XGC-320 Controller, conveniently housed in a compact 1/8-DIN enclosure, can be used on your benchtop or mounted in an instrument panel cutout. The bright, OLED 4 digit display is easy to read. Intuitive front panel controls allow direct gauge calibration and simple adjustment of vacuum measurement parameters. The XactGauge XGC-320 Convection-Enhanced Pirani Gauge Controller is powered by user supplied 12 to 28 VDC, 2 W, or by our XactGauge Enhanced Pirani Controller power supply. The XGC-320 Controller has a serial RS232/RS485 (DB-9) remote I/O interface, two (2) setpoints, and four (4) analog relay outputs, each rated at 1 A at 30 VDC. This XGC-320 Controller is compatible with other manufacturer’s Pirani type gauges and cables, including the Granville-Phillips® 275 Convectron® and the Inficon PGE050 Pirani Gauge Enhanced. Thermal conductivity gauges measure pressure indirectly by sensing the loss of heat from a sensor to the surrounding gas. The higher the pressure of the gas, the more heat is conducted away from the sensor. Pirani thermal conductivity gauges maintain a sensor (usually a wire) at a constant temperature and measure the current or power required to maintain that temperature. A standard Pirani gauge has a useful measuring range of about 10-4 Torr to 10 Torr. Convection-enhanced Pirani gauges take advantage of the convection current inside the sensor to extend the pressure measurement range to just above atmosphere. The XactGauge is supplied factory calibrated using Nitrogen (N2) gas. When measuring gasses other than Nitrogen/Air, accurate correction must be made for the difference in thermal conductivity between nitrogen and the gas in use, particularly at pressures above 1 Torr. DO NOT USE for explosive, corrosive or toxic gasses.

Ideal Vacuum XactGauge Convection-Enhanced Pirani Gauge Kit, XGC-320 Controller, XGC-321 KF-25 Gauge, 10 ft. Sensor Cable, PS, 2 Set Points Complete Kit Includes: XactGauge XGC-320 Convection-Enhanced Controller, XGC-321 KF-25 Sensor Gauge, 3 m (10 ft.) Sensor Cable & Power Supply. Features: Inexpensive solution for Pirani type thermal conductivity gauges Convection-Enhanced Pirani sensor gauges available in 8 different flange sizes Accurate pressure measurements from 1x10-4 to 1000 Torr Compact 1/8-DIN package fits on bench or in instrument panel cutout Bright, easy to read, 4 digit OLED display Intuitive front panel controls for calibration and parameter adjustments Switch between Torr, mBar and Pa units quickly Serial RS232/RS485 DB9 I/O interface for remote control 2 set points 4 analog outputs Compatible with Granville-Phillips® 275 Convectron® and Inficon PGE050 Pirani Gauge Enhanced sensors and cables. The Ideal Vacuum XactGauge XGC-320 Convection Enhanced Pirani Gauge Controller is an inexpensive solution for simple readout of Pirani type thermal conductivity gauges with added features for ease of use and system integration. Use with any of our eight (8) XactGauge Enhanced Pirani Sensor Gauges to obtain accurate pressure measurements ranging from 1x10-4 to 1000 Torr. Our XactGauge XGC-320 Controller, conveniently housed in a compact 1/8-DIN enclosure, can be used on your benchtop or mounted in an instrument panel cutout. The bright, OLED 4 digit display is easy to read. Intuitive front panel controls allow direct gauge calibration and simple adjustment of vacuum measurement parameters. The XactGauge XGC-320 Convection-Enhanced Pirani Gauge Controller is powered by user supplied 12 to 28 VDC, 2 W, or by our XactGauge Enhanced Pirani Controller power supply. The XGC-320 Controller has a serial RS232/RS485 (DB-9) remote I/O interface, two (2) setpoints, and four (4) analog relay outputs, each rated at 1 A at 30 VDC. This XGC-320 Controller is compatible with other manufacturer’s Pirani type gauges and cables, including the Granville-Phillips® 275 Convectron® and the Inficon PGE050 Pirani Gauge Enhanced. Thermal conductivity gauges measure pressure indirectly by sensing the loss of heat from a sensor to the surrounding gas. The higher the pressure of the gas, the more heat is conducted away from the sensor. Pirani thermal conductivity gauges maintain a sensor (usually a wire) at a constant temperature and measure the current or power required to maintain that temperature. A standard Pirani gauge has a useful measuring range of about 10-4 Torr to 10 Torr. Convection-enhanced Pirani gauges take advantage of the convection current inside the sensor to extend the pressure measurement range to just above atmosphere. The XactGauge is supplied factory calibrated using Nitrogen (N2) gas. When measuring gasses other than Nitrogen/Air, accurate correction must be made for the difference in thermal conductivity between nitrogen and the gas in use, particularly at pressures above 1 Torr. DO NOT USE for explosive, corrosive or toxic gasses.

Inficon MPG400 Pirani, Cold Cathode, Inverted Magnetron Gauge, FPM Sealed, KF-ISO DN 25, KF25. PN 351-010. This INFICON Gauge is a Pirani and Cold Cathode combination gauge design and can measure pressure from atmosphere to 7x10-9 Torr. The gauge consists of two separate measuring systems (the Pirani and the cold cathode system according to the inverted magnetron principle). They are combined in such a way that for the user, they behave like one measuring system. They have a KF-ISO DN 25, KF25 vacuum flange fitting and are compatible to work with the following INFICON Pressure Gauge Controllers:INFICON Single Channel Controller VGC401.INFICON Two Channel Controller VGC402.INFICON Three Channel Controller VGC403.This UHV Inverted Magnetron Gauge can work with virtually any Vacuum Pump or Vacuum Pump System with the proper INFICON signal cable and INFICON controller with KF-ISO DN 25, KF25 connector fittings. A complete instruction manual is available for download in PDF format below. We Also Rebuild and Repair INFICON Inverted Magnetron Gauges:

Inficon VGC501 Single Channel Vacuum Pressure Gauge Controller, PN 398-481 The VGC501 is your complete solution for process pressure measurement and control. Compatible with all INFICON active pressure gauges, the VGC501 controller can monitor the entire pressure range from 10-10 to 1500 mbar (10-10 to 1125 Torr) and the setpoint status. Features Include: Auto ID of connected INFICON gauges, User selectable measurement unit (mbar, Torr, Pascal, micron), High resolution – 16 bit A/D converter, Up to six adjustable setpoints with adjustable hysteresis may be assigned to any channel (depending on model), Programmable 0 to 10 V chart recorder output with logarithmic / linear characteristics for each gauge or gauge combination (VGC502/503 only), Firmware upgrades available on-line and easily downloaded via the RS232 interface, Versatile, compact bench-top model design can easily be mounted in a panel or 19 inch rack, Widerange power supply 90 to 250V, 50 to 60Hz. This is the controller ONLY and comes with AC power cord, INFICON Sensors, Gauges and Cables sold on this website separately. For a complete instruction manual, scroll down to (AVAILABLE DOWNLOADS) and download the .pdf.

INFICON PCG, PEG, PSG, MPG Gauge Cable, to INFICON VGC401-501, VGC402-502, VGC403-503, Vacuum Gauge Controller, 10 ft (3 Meters) PN: 398-500 This is a signal cable that connects the INFICON VGC401-501, VGC402-502, VGC403-503 to the PCG, PEG, PSG, MPG gauges. Cable is 10 ft. (3 Meters). Connector FCC / FCC. (This pricing is for the cable only, pumps, controllers, sensors sold separately.) Connects to the Following INFICON Gauges: PCG Pirani Capacitance Diaphragm Gauges: PCG400 • PCG410 • PCG550 • PCG552 • PCG554 • PEG Penning Gauges: • PEG100 •