Ideal Vacuum Cube, 6 x 12 inch Non-Thermally Isolated Chamber Plate For Circulating Hot or Cold Fluids. This is a non-thermally isolated Ideal Vacuum Cube 6 x 12 inch TVAC plate with 3/8” OD fluid tubes. This plate allows the vacuum side of the plate to be thermally controlled by circulating hot or cold fluids through its stainless steel tubes and internal cavity. The operating range of this plate is 150°C to -26°C (302°F to -15°F). This thermal vacuum Cube plate allows the Ideal Vacuum Cube to be used as a thermal vacuum or thermal shock vacuum chamber. It can also function as a chilled trap for chemical and high boiling point liquids. Multiple TVAC plates may be mounted to a Cube and plumbed together to enhance temperature control capability. Fluid is commonly supplied by a recirculating heater or chiller such as those made by Thermo Scientific, Neslab, and Huber. Insulated supply and return hoses connect the heater/chiller system to the thermal plate with 3/8" OD tube fittings. The plate’s core is made of 304L stainless steel and has an optical breadboard on the vacuum side with a 10.275" x 3.0" temperature-controlled area. Because the thermal cavity is not thermally isolated from the rest of the plate, operating temperatures are limited to that of the plate’s Viton O-ring vacuum seal. The plate is designed to occupy minimal volume within the Cube envelope and may be mounted in any orientation. Features: 6" x 12" plate 6061-T6 aluminum Blue powdercoat 3/8” OD stainless steel supply and return tubes Operating temperature range 150°C to -26°C (302°F to -15°F) 10.275" x 3.0" temperature-controlled core Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x12 6x12x12 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.

Ideal Vacuum Cube Cooling Plate Adapter Kit Connects Two Thermal Fluid 12x12 Plates to One Chiller. This cooling plate adapter kit is used to connect two Ideal Vacuum Cube 12x12 cooling plates (P108474) to one Thermo Scientific Neslab model Arctic, AC200 A25, AC200 A40, or Accel 500LT cooler. The kit branches the main cooling line off to a secondary cooling plate attached to a second 12x12 Ideal Vacuum Cube, allowing both chambers to be chilled in conjunction with one single chiller. This cooling plate adapter kit comes with: 5ft length of 1/2" ID insulated hose (x2) 3/8" x 1/2" OD tube adapters (x2) 1/2" x 1/2" x 1/2" OD Stainless Steel Barbed Tee (x2) #10 Stainless Steel Clamps (x4)

ThermoTek T257P ThermoElectric Recirculating Chiller 210 Watts Cooling, 100-240 VAC 50/60. ThermoTek Part Number: 0P9T257P20. The T257P is a compact thermoelectric water chiller that offers 210 watts of cooling with a variable speed 21.75 psi centrifugal pump. This unit has a touch screen interface, is solid-state and contains no refrigerant or compressor, has low noise and vibration, and has excellent temperature stability of ±0.1°C at constant ambient temp. The thermoelectric chip allows for both heating and cooling applications, with a temperature range of -5°C to +45°C. This chiller is excellent for laboratory use, cooling of laser systems which require precise temperature control, cooling of small vacuum chamber components, defense applications and much more. For connectivity, the unit is compatible with USB and RS-23. FEATURES 210 Watts cooling capacity 21.75 psi / 3.8 LPM centrifugal pump Variable speed pump Weighs only 16 lbs (7.3 kg) Touch screen interface Low noise and vibration Integrated carry handle Universal power supply Leak-free QD fittings USB and RS-232 connectivity APPLICATIONS Laboratory Laser Cooling X-Ray Systems Medical Equipment Analytical Equipment Vacuum Chamber Application Defense Applications Semiconductor Applications SYSTEM PERFORMANCE Thermal Performance: Up to 210 Watts cooling @ 0° DTStability: +/- 0.1°C @ >=0.6 LPM flow at constant load & constant ambient tempFlow Rate Availability: up to 4.0 LPM (open flow water)Pressure Availability: up to 1.5 Bar (21.75 psi) max pressureTemperature Range: -5°C to +45°CInput Voltage: 100—240 VAC 50 / 60 HzInput Power: 600 Watts max

NEW Thermo Scientific Haake ARCTIC SC150 A25 Refrigerated Bath Circulator, Neslab RTE7 & RTE10 Digital One Replacement Thermo Fisher pn: 1535258 The Thermo Fisher Scientific Neslab RTE7 and RTE10 chillers were extremely popular in the scientific and research communities but have now been discontinued and replaced by the NEW Thermo Fisher Haake Arctic SC150-A25 chiller. The Arctic SC150-A25 chiller is a good replacement option having basically the same specifications as the older Neslab RTE 7 and RTE 10 chillers. These chillers offer the SC150 heated immersion circulator controller and has the following features: 500W cooling capacity at 20°C 230V/115V 12 liter stainless steel immersion bath Temperature range of -25°C to 150°C Maximum temperature: 150 °C Flow Rate is 17 liters per minute Voltage Requirement: 115VAC 60Hz Five programmable set point temperatures Real Temperature Adjustment (RTA) for calibration Two levels of pump speed adjustment to increase flow or bath agitation Three languages (English, German & French) Change digital display resolution between 0.1 and 0.01 and between °C - °F - °K Acoustic and visual alarm Auto-Restart feature after loss of power Early warning alert for fluid refill Controller Head can be indexed 90° to the right or left for easy display view Energy Saving Mode option available for applications running under a stable load Automatic controller shut-down at detection of high temperature, low liquid or motor overload Communication options: RS232, RS485, Ethernet/LAN and Analog I/O The Thermo Scientific HAAKE ARCTIC SC150 A25 refrigerated circulator bath chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. These robust, compact units offer precise temperature stability and high reliability for external circulation and in-bath applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. This ARCTIC HAAKE SC150-A25 Immersion Bath Circulator by NESLAB provides excellent agitation in the bath for improved uniformity and stability. The controller technology ensures that the ARTIC A25 performs at its peak. This unit is an economical investment with capabilities that meet a wide range of application needs, and is designed for years of reliable service. This Thermo Scientific NESLAB SC150 Arctic A25 chiller bath circulator has a SC150 Thermostat Model with temp range of -25°C to +150°C, Flow 17L/min., Stainless Steel 12 liter (3 gallon) Bath , 115V 60Hz, see ad below. This is Brand New and comes with 3 year manufacture warranty. A user’s manual and specification brochure is available by downloading the PDFs below from (AVAILABLE DOWNLOADS).

Thermo Scientific Tubing Connection Kit for Thermo Haake ARCTIC AC200 series, 3/8 & 1/2 inches(8 & 12mm) OD barb. Thermo Scientific Part Number 1600030 These Thermo Scientific Neslab tubing connection kits are designed to work with the Arctic AC200 series chillers.