Ideal Vacuum Cube 12 x 12 Vacuum Chamber Blank Plate No Ports Uncoated for Bakeout. This is an uncoated Ideal Vacuum Cube 12 x 12 inch blank plate without ports and without the internal optical breadboard grid found on most other Cube plates. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive 12 x 12 Cube plate we offerUse it as is for the bottom of a Cube or any other Cube side where ports are not needed, or customize to your requirements by adding unusual or proprietary ports, for welding on bulkhead fittings, or for custom attachments and fixtures. Note that Ideal Vacuum offers custom Cube plate solutions. Please speak to your representative for a quick quote. Features: 12 x 12 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6x12x12 (on 12 x 12 side) 24 x 24 x 24

Ideal Vacuum Cube 12 x 12 Vacuum Chamber Plate with One CF 4.5 in. Port and Four CF 2.75 in. Ports, Uncoated Aluminum for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 12 x 12 inch plate with one centered CF 4.5" and four CF 2.75" Conflat ports in each plate corner. The plate is machined from 6061-T6 aluminum and is non-coated. The plate’s 4.5" CF port has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The 4.5" CF port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250), and uses a Viton seal (P104342). Each of the two CF 2.75" ports have 1/4-28 UNF tapped mounting holes and each port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404) and use Viton seals (P104341). The CF ports are not compatible with metal gaskets. Cube baseline vacuum is 1 x 10-7 Torr. Features: 12 x 12 plate 6061-T6 aluminum Uncoated Single CF 4.5" port with 5/16-24 UNF tapped holes Quad CF 2.75" ports, centered on plate sides with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6x12x12 (on 12 x 12 side) 24 x 24 x 24

Ideal Vacuum Cube 12 x 12 Vacuum Chamber Plate With One Conflat CF 10.0 in. Port Uncoated Stainless Steel. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 12 x 12 inch plate with one CF 10.0" centered Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires twenty-four (24) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012252). The CF port is not compatible with metal gaskets. Use only Viton seals (P104347). Cube baseline vacuum is 1 x 10-7 Torr. Features: 12 x 12 plate 6061-T6 aluminum 304L stainless steel Single CF 10.0" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6x12x12 (on 12 x 12 side) 24 x 24 x 24

Ideal Vacuum Cube 12 x 12 in. Plate Adapter Kit to One 6 x 6 in. Plate, Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to one centered 6 x 6 inch opening. The 6 x 6" opening accepts any 6 x 6 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Kit includes: 12 x 12 to one centered 6 x 6 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) One Viton O-ring for 6 x 6 Cube plate (P107295) Thirty-two 1/4"-20 x 5/16" long SHCS mounting screws, P1013341 (includes 8 spares) Features: Allows one 6 x 6 plate to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C Internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 in. Plate Adapter Kit to One Centered 6 x 6 in. Plate Plus Four KF-25 Ports, Uncoated with Internal Optical Breadboard. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to a single, centered 6 x 6 inch opening. This adapter plate also has four KF-25 ports located in the corners of the plate. The 6 x 6 opening accepts any 6 x 6 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, the KF-25 ports on this adapter plate use KF bulkhead clamps and cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Kit includes: 12 x 12 to 6 x 6 centered adapter plate One Viton O-ring for 12x12 Cube Plate (P108428) One Viton O-ring for 6 x 6 Cube plate (P107295) Eight 1/4"-20 x 5/16" long SHCS screws for 6 x 6 plate mounting (P1013341) Features: Allows 6 x 6 plate to attach to center of 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C Four KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 in. Plate Adapter Kit to Four 6 x 6 in. Plates, Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to four 6 x 6 inch openings. The 6 x 6" openings accept any 6 x 6 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Kit includes: 12 x 12 to four 6 x 6 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) Four Viton O-ring for 6 x 6 Cube plate (P107295) Fifty-six 1/4"-20 x 5/16" long SHCS mounting screws, P1013341 (includes 8 spares) Features: Allows four 6 x 6 plates to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C No internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 in. Plate Adapter Kit to Two 6 x 6 in. Plates and One 6 x 12 in. Plate, Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to two 6 x 6 inch and one 6 x 12 inch opening. The 6 x 6 and 6 x 12" openings accept any 6 x 6 or 6 x 12 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Note that this Cube adapter plate is thicker than other plates (to maintain plate rigidity) and therefore uses 1/2" long socket head cap screws for mounting to the 12" x 12" frame side. The 6 x 6 and 6 x 12 plates mount with the usual 1/4"-20 x 5/16" long screws. Kit includes: 12 x 12 to two 6 x 6 and one 6 x 12 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) One Viton O-ring for 6 x 12 Cube plate (P108339) Two Viton O-ring for 6 x 6 Cube plate (P107295) Sixteen 1/4"-20 x 1/2" long SHCS screws for mounting to 12 x 12" frame side, P1013343 (includes 8 spares) Thirty-six 1/4"-20 x 5/16" long SHCS screws for 6x6 and 6 x 12 plate mounting, P1013341 (includes 8 spares) Features: Allows one 6 x 12 plate and two 6 x 6 plates to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C No internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 in. Plate Adapter Kit to Two 6 x 12 in. Plates, Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to two 6 x 12 inch openings. The 6 x 12" opening accepts any 6 x 12 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Note that this Cube adapter plate is thicker than other plates (to maintain plate rigidity) and therefore uses 1/2" long socket head cap screws for mounting to the 12" x 12" frame side. The 6 x 12 plates mount with the usual 1/4"-20 x 5/16" long screws. Kit includes: 12 x 12 to two 6 x 12 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) Two Viton O-ring for 6 x 12 Cube plate (P108339) Sixteen 1/4"-20 x 1/2" long SHCS screws for mounting to 12 x 12" frame side, P1013343 (includes 8 spares) Twenty-four 1/4"-20 x 5/16" long SHCS screws for 6 x 12 plate mounting, P1013341 (includes 8 spares) Features: Allows two 6 x 12 plates to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C No internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.