Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Edwards nEXT300D TStations On Sale Busch R5 Rotary Vane Vacuum Pumps Edwards nEXT85H TStations On Sale Edwards iXH Dry Semiconductor Pumps On Sale Leybold Sogevac Neo-D Dual Stage Rotary Vane Vacuum Pumps On Sale Leybold VaroDry Series Pumps

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers ExploraVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Gauges And Controllers Pressure Measurement Chillers
×

Load

New MKS 246 246C Single Channel Mass Flow Controller Power Supply Readout
In Stock: 5


MKS Type 246 246C SingleChannel Mass Flow Controller Power Supply Readout The MKS Type 246 246C Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 246 246C is a single channel single readout unit. Compatible with mass flow controllers and mass flow readouts 179, 180, 579, 1179, 1479, 1480, 1559, 1579, 2179, M10M, M100. Signal cables for the MKS 246 246C are available on this website. For Specifications on this MKS 246 246C See AVAILABLE DOWNLOADS Below.

Condition: New



Product Number: P102864



Price: $2,113.13



New MKS 247 247D Four Channel Mass Flow Controller Power Supply Readout
In Stock: 1


MKS Type 247 Four Channel Mass Flow Controller Power Supply Readout The MKS Type 247 Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 247 is a four channel/sequentially selectable single readout. Compatible with mass flow controllers and mass flow readouts 179, 180, 579, 1179, 1479, 1480, 1559, 1579, 2179, M10M, M100. Signal cables for the MKS 247 are available on this website. For Specifications on this MKS 247 See AVAILABLE DOWNLOADS Below.

Condition: New



Product Number: P102862



Price: $2,793.00



MKS General Purpose Flow Control Valve, 2000 sccm, 1/4 in Swagelok tube fitting, Viton Seals, PN: 0248D-02000SV
Out of Stock


MKS General Purpose Flow Control Valve, 2000 sccm, 1/4 in Swagelok tube fitting, Viton SealsWhen supplied with a controlling current, this general purpose modified solenoid valve will modulate the flow of gas. When used with an MKS controller and appropriate flow sensor, the 248D valve modulates gas flow while maintaining accurate and precise pressure or flow. Applications include flow control, upstream, or downstream pressure control. This model 0248D-02000SV valve features a 2000 standard cubic centimetres per minute (sccm) of Nitrogen full scale range, Swagelok® 1/4 in. tube fittings, and Viton seals. Through closed valve leakage conductance is <1x10-5 scc/sec He.Swagelok-TM Swagelok Company

Condition: New



Product Number: P1010272



Price: $895.66



MKS General Purpose Flow Control Valve, 10000 sccm, 1/4 in Swagelok tube fitting, Viton Seals, PN: 0248D-10000SV
Out of Stock


MKS General Purpose Flow Control Valve, 10000 sccm, 1/4 in Swagelok tube fitting, Viton SealsWhen supplied with a controlling current, this general purpose modified solenoid valve will modulate the flow of gas. When used with an MKS controller and appropriate flow sensor, the 248D valve modulates gas flow while maintaining accurate and precise pressure or flow. Applications include flow control, upstream, or downstream pressure control. This model 0248D-10000SV valve features a 10000 standard cubic centimetres per minute (sccm) of Nitrogen full scale range, Swagelok® 1/4 in. tube fittings, and Viton seals. Through closed valve leakage conductance is <1x10-5 scc/sec He.Swagelok-TM Swagelok Company

Condition: New



Product Number: P1012149



Price: $895.66



New MKS 640B Mass Flow Electronic Absolute Pressure Controller 4 torr, 20 sccm, Swagelok 4 VCR
Out of Stock


New MKS 640B Mass Flow Electronic Absolute Pressure Controller 4 torr, 20 sccm, Swagelok 4 VCR The PFC-20 MFC is a Mass Flow Controller which is capable of being configured to control a wide range of Safe Delivery Source Gasses (SDS). Input and output fittings are Swagelok® 4 VCR®. The multi-range capabilities can be configured through a web browser based application accessed by plugging the MFC into a router or a computer via Ethernet cable. The E-diagnostics application allows a user to monitor the MFC’s performance in real time as well as plot data and select variables. Its wide range thermal sensor and normally-closed proportioning control valve allows for real-time feedback control for applications with inlet pressures from 4 to 1200 Torr. These features make the PFC-20 MFC perfect for a large variety of Ion Implantation applications, especially the development and processing of semiconductors. Because of its multi-gas, multi-range capabilities, the PFC-20 MFC can dramatically lower operating costs and eliminate the need for a large on hand MFC inventory, reduce bottle change-outs and increase efficiency, speed and accuracy. Swagelok, VCR-TM Swagelok Company

Condition: New



Product Number: P108362



Price: $3,350.00



New MKS 179C Mass Flow Electronic Absolute Pressure Controller, 15 Pin, 10 torr, 50 SCCM, Swagelok 4 VCR
Out of Stock


New MKS 179C Mass Flow Electronic Absolute Pressure Controller, 15 Pin, 10 torr, 50 SCCM, Swagelok 4 VCR The MKS 179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are Swagelok® 4 VCR® The MKS 179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

Condition: New



Product Number: P1010671



Price: $1,735.79



New MKS 640B Mass Flow Electronic Absolute Pressure Controller 10 torr, 1000 sccm, Swagelok 4 VCR
Out of Stock


MKS Type 640B Electronic Absolute Pressure Controller 10 torr, 1000 sccm, Swagelok 4 VCR, Viton, PN 640B11TS1V22V The 640B are self contained, compact, closed-loop electronic pressure control systems. They contain a capacitance manometer, normally closed proportioning control valve, and closed-loop control electronics. The 640B controls absolute pressure. A 641B pressure gauge controller is also available and measures pressure relative to ambient barometric pressure. Pressure Range for this unit is 10 torr, 1000 sccm/1 slm flow, min range 2% of full range to 0.2 torr, Swagelok® 4 VCR® connections and Viton® Seals. The transducer is a Baratron® capacitance manometer, with Full Scale pressure ranges from 100 psi to as low as 10 Torr. Baratron capacitance manometers – well-known for their percent of reading accuracy, stability, and resolution – provide precise measurements at lower pressures and over wider dynamic ranges than strain gauge transducers. Furthermore, Baratron capacitance manometers have no silicone oil fill which can result in hysteresis and can slow the controller time response. Electrically similar to a standard Mass Flow Controller, the 640B are powered by ±15 VDC at only 200 mA, permitting use with standard power supply/display electronics such as MKS 246 or 247 Power Supplies. The pressure output and input control signals are linear 0-5 or 0-10 VDC. Two trip points are included in the 640B with LED status indicators, for use as simple on/off process limits. During final testing at MKS, the 640B control loop tuning parameters are preset for typical installation conditions, but are field adjustable for different conditions and optimum performance. The Proportional and Integral Term adjustments are simple rotary switches, rather than potentiometers, to enable OEMs, or users with multiple controllers, to preset all units to the same control loop parameters. NOTE: For Valve Orifice Size and Pressure Range for your application please see MKS 640B 641B Brochure.pdf Page 2 to the side at Downloads. Swagelok, VCR-TM Swagelok Company, Viton-TM Chemcours Company, Baratron-TM MKS.

Condition: New



Product Number: P108824



Price: $2,903.75



New MKS 640B Mass Flow Electronic Absolute Pressure Controller 100 torr, 1000 sccm, Swagelok 4 VCR
Out of Stock


MKS Type 640B Electronic Absolute Pressure Controller 100 torr, 1000 sccm, Swagelok 4 VCR, Viton, PN 640B12TS1V22V The 640B are self contained, compact, closed-loop electronic pressure control systems. They contain a capacitance manometer, normally closed proportioning control valve, and closed-loop control electronics. The 640B controls absolute pressure. A 641B pressure gauge controller is also available and measures pressure relative to ambient barometric pressure. Pressure Range for this unit is 100 torr, 1000 sccm/1 slm flow, min range 2% of full range to 2 torr, Swagelok® 4 VCR® connections and Viton Seals. The transducer is a Baratron capacitance manometer, with Full Scale pressure ranges from 100 psi to as low as 10 Torr. Baratron capacitance manometers – well-known for their percent of reading accuracy, stability, and resolution – provide precise measurements at lower pressures and over wider dynamic ranges than strain gauge transducers. Furthermore, Baratron capacitance manometers have no silicone oil fill which can result in hysteresis and can slow the controller time response. Electrically similar to a standard Mass Flow Controller, the 640B are powered by ±15 VDC at only 200 mA, permitting use with standard power supply/display electronics such as MKS 246 or 247 Power Supplies. The pressure output and input control signals are linear 0-5 or 0-10 VDC. Two trip points are included in the 640B with LED status indicators, for use as simple on/off process limits. During final testing at MKS, the 640B control loop tuning parameters are preset for typical installation conditions, but are field adjustable for different conditions and optimum performance. The Proportional and Integral Term adjustments are simple rotary switches, rather than potentiometers, to enable OEMs, or users with multiple controllers, to preset all units to the same control loop parameters. NOTE: For Valve Orifice Size and Pressure Range for your application please see MKS 640B 641B Brochure.pdf Page 2 to the side at Downloads. Swagelok, VCR-TM Swagelok Company, Viton-TM Chemcours Company, Baratron-TM MKS.

Condition: New



Product Number: P108826



Price: $2,903.75



New MKS 640B Mass Flow Electronic Absolute Pressure Controller 1000 torr, 200 sccm, Swagelok 4 VCR
Out of Stock


MKS Type 640B Electronic Absolute Pressure Controller 1000 torr, 200 sccm, Swagelok 4 VCR, Viton, PN 640B13TS1V12V The 640B are self contained, compact, closed-loop electronic pressure control systems. They contain a capacitance manometer, normally closed proportioning control valve, and closed-loop control electronics. The 640B controls absolute pressure. A 641B pressure gauge controller is also available and measures pressure relative to ambient barometric pressure. Pressure Range for this unit is 1000 torr, 200 sccm/1 slm flow, min range 2% of full range to 20 torr, Swagelok® 4 VCR® connections and Viton® Seals. The transducer is a Baratron® capacitance manometer, with Full Scale pressure ranges from 100 psi to as low as 10 Torr. Baratron capacitance manometers – well-known for their percent of reading accuracy, stability, and resolution – provide precise measurements at lower pressures and over wider dynamic ranges than strain gauge transducers. Furthermore, Baratron capacitance manometers have no silicone oil fill which can result in hysteresis and can slow the controller time response. Electrically similar to a standard Mass Flow Controller, the 640B are powered by ±15 VDC at only 200 mA, permitting use with standard power supply/display electronics such as MKS 246 or 247 Power Supplies. The pressure output and input control signals are linear 0-5 or 0-10 VDC. Two trip points are included in the 640B with LED status indicators, for use as simple on/off process limits. During final testing at MKS, the 640B control loop tuning parameters are preset for typical installation conditions, but are field adjustable for different conditions and optimum performance. The Proportional and Integral Term adjustments are simple rotary switches, rather than potentiometers, to enable OEMs, or users with multiple controllers, to preset all units to the same control loop parameters. NOTE: For Valve Orifice Size and Pressure Range for your application please see MKS 640B 641B Brochure.pdf Page 2 to the side at Downloads. Swagelok, VCR-TM Swagelok Company, Viton-TM Chemcours Company, Baratron-TM MKS.

Condition: New



Product Number: P108827



Price: $2,903.75



New MKS 640B Mass Flow Electronic Absolute Pressure Controller 1000 torr, 1000 sccm, Swagelok 4 VCR
In Stock: 1


MKS Type 640B Electronic Absolute Pressure Controller 1000 torr, 1000 sccm, 1/4 in Swagelok, Viton®, PN 640B13TS1V22V The 640B are self contained, compact, closed-loop electronic pressure control systems. They contain a capacitance manometer, normally closed proportioning control valve, and closed-loop control electronics. The 640B controls absolute pressure. A 641B pressure gauge controller is also available and measures pressure relative to ambient barometric pressure. Pressure Range for this unit is 1000 torr, 1000 sccm/1 slm flow, min range 2% of full range to 20 torr, 1/4'' Swagelok® connections and Viton Seals. The transducer is a Baratron capacitance manometer, with Full Scale pressure ranges from 100 psi to as low as 10 Torr. Baratron capacitance manometers – well-known for their percent of reading accuracy, stability, and resolution – provide precise measurements at lower pressures and over wider dynamic ranges than strain gauge transducers. Furthermore, Baratron capacitance manometers have no silicone oil fill which can result in hysteresis and can slow the controller time response. Electrically similar to a standard Mass Flow Controller, the 640B are powered by ±15 VDC at only 200 mA, permitting use with standard power supply/display electronics such as MKS 246 or 247 Power Supplies. The pressure output and input control signals are linear 0-5 or 0-10 VDC. Two trip points are included in the 640B with LED status indicators, for use as simple on/off process limits. During final testing at MKS, the 640B control loop tuning parameters are preset for typical installation conditions, but are field adjustable for different conditions and optimum performance. The Proportional and Integral Term adjustments are simple rotary switches, rather than potentiometers, to enable OEMs, or users with multiple controllers, to preset all units to the same control loop parameters. NOTE: For Valve Orifice Size and Pressure Range for your application please see MKS 640B 641B Brochure.pdf Page 2 to the side at Downloads. Swagelok-TM Swagelok Company, Viton-TM Chemcours Company, Baratron-TM MKS.

Condition: New



Product Number: P108828



Price: $2,903.75



New MKS GM50A Mass Flow Digital Thermal Based Mass Flow Controller Ar Gas, 50 sccm, Swagelok 4 VCR
Out of Stock


MKS GM50A Mass Flow Digital Thermal Based Mass Flow Controller Ar Gas, 50 sccm, Swagelok 4 VCR PN: GM50A004501RMM020 The MKS GM50A Mass Flow Controller is capable of being configured to control a wide range of Safe Delivery Source Gasses (SDS). Input and output fittings are Swagelok® 4 VCR®. The multi-range capabilities can be configured through a web browser based application accessed by plugging the MFC into a router or a computer via Ethernet cable. The E-diagnostics application allows a user to monitor the MFC’s performance in real time as well as plot data and select variables. Swagelok, VCR-TM Swagelok Company

Condition: New



Product Number: P1011151



Price: $2,546.04



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com