Brass Hole Plug to Fit 3/4 inch Diameter Feedthrough Port up to 1 in. Thick, with Viton O-Ring
Brass Hole Plug to Fit 3/4 inch Diameter Feedthrough Port up to 1 in. Thick, with Viton O-Ring.

These brass feedthrough hole plugs are designed to seal 3/4 inch diameter ports on flat plates or chambers with walls up to 1.0" thick. These brass hole plugs have Viton O-ring seals and are rated for high vacuum in the 10-8 Torr range.

NOTICE: Brass alloys contain Zinc. Zinc will outgas from brass under certain combinations of elevated temperature and high-vacuum. System damage may occur if these conditions are present.

Dimensions:
  • A = 0.74"
  • B = 1.5"
  • C= .07"
  • D = 0.375"
  • E = 1.0" Max.

Product: Brass Hole Plug to Fit 3/4 inch Diameter Feedthrough Port up to 1 in. Thick, with Viton O-Ring
Condition:      New
Warranty:     Against Product Defect
Part Number: P105378
Price: $76.18