| NEW Agilent Varian MS-301 High Capacity Single Stage Rotary Vane Vacuum Pump, with Gas Balast, 2 inch inlet port, 3-ph. motor, 208-230/460 V, 60 Hz (NEMA)
The NEW Agilent Varian MS-301 High Capacity Rotary Vane
Pumps are single stage rotary vane vacuum pumps lubricated,
with oil recirculation, driven by a flanged
electrical motor, coupled by means of an elastic
coupling. They are suitable for pumping non-corrosive gases. Cooling is achieved by means of an air/oil cooler, cooled with a centrifugal fan. At the pump inlet
there is a mesh filter in order to protect it from solid
parts having diameter larger than 1.5 mm. Furthermore,
an integrated non return valve prevents
the oil coming back and the return of air in the
chamber to be pumped down during the stop
phase. In the tank there is a system of oil smokes separation
from the discharged air (maximum residual
2PPM/weight corresponding to 2.4 mg/m3). The separated oil is recovered automatically by the pump. A standard gas ballast valve prevents condensation
inside the pump even when pumping down
small quantity of vapors. These Agilent MS-301 vacuum pumps are easy to maintain, service and repair.
These Agilent Varian MS301, MS 301 vacuum pumps are used in a variety of industries such as packaging in the food preparation industry, degassing, thermal forming of plastics, vacuum drying, impregnation, vacuum stirring, and mixing. Pumping Speed 170 CFM. Maintenance service, repair, oils and accessories for these Agilent Varian MS301, MS 301 vacuum pumps are available on this website. This is a New Pump with factory warranty. We also service, repair and rebuild this vacuum pump and perform maintenance repair on other Varian Agilent models as well. PUMP SUPPLIED WITHOUT LUBRICATING OIL, Available on this Website. The complete operating instructions manual in .PDF format is available for download below.
Agilent Varian MS-301 - 170 CFM, 208-230/460 V, 60 Hz, 3-Phase, with gas ballast, with oil filter but shipped with NO OIL. Item Number G8710A-120-112.