Skip to main content
× 서비스 제품 카탈로그 다운로드 기술 지원 에 대한 연락하다 채용 (505) 872-0037

(505) 872-0037

Shopping Cart Icon
카트
 
Login Icon
로그인
Language Selector
ko-kr
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Edwards nXR Multi Stage Roots Pumps On Sale Edwards nEXT300D TStations On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale Agilent Varian Helium Leak Detectors On Sale Pfeiffer ASM340 Leak Detectors On Sale

예어       부품 번호:      

× 진공펌프 모듈형 진공 챔버 스테인레스 스틸 진공 챔버 이상 용접 알루미늄 챔버 ExploraVAC 무제한 챔버 ExploraVAC TVAC 테스트 챔버 피팅 및 플랜지 피드스루 진공 밸브 재구축 키트, 부품, 모터 진공 유체, 오일 및 그리스 터보 펌프 및 컨트롤러 필터 트랩 소음기 대류 및 진공 오븐 누수 탐지 진공 압력 측정 재순환 냉각기 및 수조
×

Load

Product Image 1
Product Image 2
Product Image 3
25% OFF

Leybold Scrollvac 7 Plus 오일 프리 건식 스크롤 진공 펌프(가스 밸러스트 포함), 단상 100-240VAC. PN: 141007V10

인쇄 버전
상태:
  새로운
부품 번호:
  P108375
보증:
  레이볼트 보증

지금 이용 가능   10  

₩10,364,751.80

~에 판매: ₩7,773,563.85

Leybold Scrollvac 7 Plus 오일 프리 건식 스크롤 진공 펌프(가스 밸러스트 포함), 단상 100-240VAC. PN: 141007V10 7773563.85
통화: South Korean Won (KRW)

설명

Leybold ScrollVac 7 Plus 오일 프리 건식 스크롤 진공 펌프.
가스 밸러스트 포함 1상 100-240VAC, PN: 141007V10

Ideal Vacuum Products에서 새로운 Leybold ScrollVac 7 Plus 시리즈 펌프를 판매합니다! Leybold의 새로운 Leybold ScrollVac 7 Plus 제품군은 뛰어난 펌핑 성능, 최고의 진공 성능 및 최첨단 설계 기능을 갖추고 있습니다. Leybold ScrollVac 7 Plus는 동급 최고의 성능을 자랑하는 펌프입니다. Leybold ScrollVac 7 Plus는 다른 펌프보다 최대 20배 더 조용합니다. 지능형 제어 기능과 최대 5년의 서비스 간격은 낮은 소유 비용을 제공하므로 오늘날 가장 진보된 기술에 적합한 소형 건식 펌프입니다. 이제 전 세계 어디에서나 성능을 발휘할 수 있는 범용 전압 전원 공급 장치(100-127VAC - 200-240VAC)를 사용하세요. 이는 3.6 CFM의 1상 모터 ScrollVac 7 Plus 버전입니다.

Leybold ScrollVac 7 Plus 펌프는 탄화수소 윤활제를 포함하는 모든 베어링이 진공 공간으로부터 격리되어 있는 진정한 건식 진공 펌프입니다. Leybold ScrollVac 7 Plus는 완전 오일 프리 건식 스크롤 펌프의 차세대 제품입니다. 샤프트 씰이 마모되지 않아 서비스 간격이 훨씬 길어집니다. 이는 더 낮은 최종 압력, 더 낮은 전력 소비 및 더 낮은 소음과 함께 향상된 펌핑 속도를 제공합니다. 가스 밸러스트를 사용하면 물, 용매, 묽은 산 및 염기를 포함한 응축성 증기를 펌핑할 수 있습니다. ScrollVac 7 Plus 펌프는 최신 팁 씰 기술을 갖추고 있어 팁 씰 교체 간 수명이 훨씬 길어집니다. 자동 감지 전압 입력을 갖춘 통합 인버터 드라이브는 전체적으로 최적화된 펌핑 성능을 제공합니다. ScrollVac 7 Plus 펌프는 현장에서 완벽하게 서비스할 수 있도록 설계되었습니다.


소책자

APPLICATIONS
  • General clean pumping applications
  • Scanning Electron Microscopes - SEM
  • Beam lines and high energy physics
  • Mass Spectrometry
  • Electron Microscopy
  • Sample Preparation
  • Research and Development
  • High Energy Physics
  • Industrial
  • Semiconductor
  • Backing turbo pumps
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Laboratory bench top vacuum
  • Lasers, gas recovery and recirculation
  • Research and development
  • Surface science instruments


Now with an integral pump controller managing the supply of current to a three-phase electric motor in accordance with operating conditions. The controller monitors power and temperature, and will protect the pump in the event of operation under sustained high load or under fault conditions. The controller provides the user interface. The pump may be operated in Manual mode, using the buttons on the interface panel, with a unique feature to control the speed of the pump in Standby Mode to 70% of full speed or with other buttons to increase or decrease pump speed to save wear and tear on tip seals and bearing service life; or a Remote Mode, via serial communications; or a digital and analogue process control (parallel) mode, via the 15-way D-type logic interface connector.

To pump high vapor loads, gas ballast can be delivered into the pump to prevent condensation of the vapor carried by the pumped gases. The logic interface has been designed to support both serial control, parallel control and monitoring, operating through one connector. For serial control either RS232 or RS485 can be selected.


Marca de agua con el logotipo de Ideal Vacuum
문의하기
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, 뉴 멕시코 87109-5805 USA

핸드폰: (505) 872-0037
팩스: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2
load time = 0.8438