MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 50 sccm N2 Equivalent, 15 Pin, Swagelok 4 VCR. MKS Instruments Part Number: 1179C00151CR1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are Swagelok® 4 VCR® The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

Alcatel FA 101 High Vacuum Cold Cathode Penning Gauge Controller These Alcatel FA 101 high vacuum cold cathode penning gauge controllers are precision instruments designed to indicate high vacuum pressures from 1x10-2 to 1x10-7 Torr. The Alcatel FA 101 high vacuum cold cathode penning gauge can operate and display pressure from one penning gauge. These Alcatel FA 101 high vacuum ion gauge controllers operate on either 115 or 220 VAC. Ion gauge cable and ion gauge tubes are available but sold separately.

Used MKS Cable connects to 286 Thermocouple Gauge Controller MKS PN CB286-2-20. USED Sold As Is. The MKS 286 controller and all its accessories have been discountinued from MKS Instruments. We often have used cables that are tested and in good working condition. These cables work for all MKS Instruments 286 dual thermocouple gauge controllers. We also offer replacement thermocouple sensors for the MKS 286 controllers. These cables are 20 feet long, are good used condition, and have MKS part number CB286-2-20.

MKS 246 Single Channel Power Supply ReadoutMKS 246 Single Channel Power Supply Readout. Designed to control and display any flow transducer. For use with Type 358, 558, 1150, 1359, 1559, 1179, 1479. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. This item has in excellent condition. Please call 505-872-0037 today for more information.

MKS PDR-C-1C Digital Power Supply and Digital Readout Capacitance Manometer Controller The MKS PDR-C-1C digital power supply and digital readout capacitance manometer controller is a single-channel version, with LCD display and can control a single Baratron pressure transducer. These MKS PDR-C-1C digital power supply and digital readouts provide + and -15 VDC and can read the 0 - 10 VDC output from most MKS capacitance manometers. New cables for these MKS PDR-C-1C digital power supply and digital readouts are available here at Ideal Vacuum Products. Please call (505) 872-0037 for more information.

Granville Phillips 316 Convectron Gauge Controller, Operates 3 Convectron Gauges, with Optional Process Control, and RS-232 Communication These Granville Phillips 316 convectron gauge controllers are multi-gauge controller that are built to operate up to 3 convectron gauge tube sensors. They also include the optional process control and RS-232/485 communication capabilities. The Granville Phillips 316 uses model 275 convectron tube sensors, which can measure pressure from atmosphere to 10-4 Torr. These controllers can be operated on 115 or 220 VAC. Availability and options on these refurbished Granville Phillips 316 controllers may vary so please call and get a quotation, (505) 872-0037. We do have New Granville Phillips 316 controllers available that can be configured with different options, for 3 convectron gauges, with option process control for set points, and optional RS-232/485 communication. We also sell separately a wide selection of new 275 convectron gauge cables and sensors. The operation and instruction manual for the Granville Phillips 316 is available for download below.

Granville Phillips 360 UHV Stabil-Ion Single Ion Gauge Controller With Dual Ion Gauge Rebuilt This Granville Phillips (Model 360) Stabil-Ion Ion gauge controller with dual ion gauge control is a precision instrument designed to indicate vacuum pressures down to 10-11 Torr with UHV ion gauges. The basic unit is comprised of a power supply, electrometer, emission controller and ion gauge meter. This controller comes complete with instruction manual, is in excellent condition and comes with 90 Day Warranty.

Granville Phillips 360 UHV Stabil-Ion Single Ion Gauge Controller With Dual Convectron Gauge Control This Granville Phillips (Model 360) Stabil-Ion Ion gauge controller with single ion gauge and dual convectron gauge control and are a precision instrument designed to indicate vacuum pressures down to 10-11 Torr with UHV ion gauges. The basic unit is comprised of a power supply, electrometer, emission controller and ion gauge meter. This controller comes complete with instruction manual and is in excellent condition and comes with 90 Day Warranty.

Used MKS Cable connects to 286 Thermocouple Gauge Controller MKS PN CB286-2-10. The MKS 286 controller and all its accessories have been discountinued from MKS Instruments. We often have used cables that are tested and in good working condition. These cables work for all MKS Instruments 286 dual thermocouple gauge controllers. We also offer replacement thermocouple sensors for the MKS 286 controllers. These cables are 10 feet long and are in used but working condition.

Varian NRC 840 High Vacuum Ion Gauge Controller With Dual ThermocoupleThese Varian (Model NRC 840) ion gauge controllers feature dual thermocouple gauges, 1 to 1x10-8 Torr. The two independent thermocouple gauges allow for pressure measurement in the range of 0.001 to 1 Torr while the ion gauge allows for pressure measurement in the 1x10-3 to 1x10-8 Torr range. The basic unit is comprised of a power supply, electrometer, emission controller and ion gauge meter. These Varian NRC 840 high vacuum ion gauge controllers operate on either 115 or 220 VAC. Ion gauge cable and ion gauge tubes are available but sold separately.

Varian 842 & 843 Glass Ion Gauge Cable, 10ft Long These ion gauge cables connect the Varian 842 & 843 ion gauge controller to one glass ion gauge tube. These cable are 10ft long. Ion gauge controllers, ion gauge tubes, and thermocouple sensors are also available but sold separately.

Varian 843 Thermocouple Gauge Cables, 10ft Long These ion gauge cables connect the Varian 843 ion gauge controller to one Varian 531 thermocouple gauge tube. These cable are 10ft long. Ion gauge controllers, ion gauge tubes, and thermocouple sensors are also available but sold separately.

Varian Multi Gauge & SenTorr Gauge Controller to Hot Cathode Glass Ion Gauge Tube Cable, (Varian, Inc. models 563, 564, 571, or 572), non-bakeable, R32443010 This is a Varian Agilent signal cable and hooks up to the Multi-Gauge and SenTorr Gauge Controllesr to the Varian Glass Ion Sensor Tubes, 563, 564, 571, 572. Cable standard 10 foot length. This is the cable only all gauges and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers: Multi-Gauge Controller SenTorr Controller

Varian Multi Gauge & SenTorr Gauge Controller to Hot Cathode Nude Ion Gauge Tube Cable, 10 foot length, non-bakeable. PN R32453010 This is a Varian Agilent signal cable and hooks up to the Multi-Gauge & SenTorr Gauge Controller to the Varian Glass Ion Sensor Tubes, UHV-24 or UHV-24p. Cable standard 10 foot length. This is the cable only. all gauges and vacuum controllers sold separately on this website. Can be used with the following Varian Agilent Controllers: Multi-Gauge Controller SenTorr Controller