Edwards Power Connector Kit Used to Make Power Cable for iXH Vacuum Pumps. This is a Edwards iXH dry semiconductor pump plug kit to make input mains power cable for Edwards iXH series semiconductors vacuum pumps. Works with iXH100, iXH610, iXH1210H, iXH1220H, and other models.

Edwards QDP, iQDP, iH, & iL Water Connector Plug/Dust Cap, Female Quick CouplingDesigned For ISO B, 3/8 NPT (National Pipe Thread) This is the rubber plug only NO FITTING. These quick-coupling protective covers are designed to fit Edwards QDP, iQDP, iH, & iL water connector male plug caps.

Edwards QDP, iQDP, iH, & iL Water Connector, Male Quick Coupler, ISO B, Brass, 3/8 Coupler Body X 3/8 Male NPT. Edwards QDP, iQDP, iH, & iL Water Connector, Male Quick Coupler, ISO B, Brass, 3/8 Coupler Body X 3/8 Male NPT (National Pipe Thread).

Edwards QDP, iQDP, iH, & iL Water Connector, Female Quick Coupling, ISO B, Brass, 3/8 Coupler Body X 3/8. Edwards QDP, iQDP, iH, & iL Water Connector, Female Quick Coupling, ISO B, Brass, 3/8 Coupler Body X 3/8 Female NPT (National Pipe Thread).

M8x1.25, 30mm Metric Socket Screws, Box of 100, LF63-100 Fittings & Intake Screws for Edwards iH600, iH1000 and iH1800 Dry Semiconductor Pumps This is a box of 100 ea., M8x1.25, 30mm long mertric socket head cap screws, class 12.9 alloy steel, black oxide finish. These screws fit tapped threaded hole ISO LF NW63, NW80 and NW100 fittings. These screws also fit the intake of Edwards Dry Semiconductor Vacuum pumps, models iH600, iH1000 and iH1800.

Edwards iQ System Terminator Plug, for iQDP and iH Dry Semiconductor Vacuum PumpsEdwards iQ System Terminator Plug, for iQDP-40 and iQDP-80 Dry Semiconductor Vacuum Pumps. Without this plug power can not be applied to the system.

Edwards Transit Seal Big for Semiconductor Pumps iL70, IH600, IH600MK, IH600MK2 Edwards Transit Seal Big for Semiconductor Pumps iL70, IH600, IH600MK, IH600MK2. iH600 PTFE SEAL-B.

Edwards Second Stage Rotor Claw for the IH 80 and IH 160 Dry Vacuum Pumps Edwards Vacuum Part Number 40801724 These Edwards Second Stage Rotors are for the Edwards IH 80 and IH 160 Dry Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards Third Stage X Rotor Claw for the IH 80 and IH 160 Dry Vacuum PumpsEdwards Vacuum Part Number 40801726 These Edwards Third Stage X Rotors are for the Edwards IH 80 and IH 160 Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards Fourth Stage X Rotor Claw for the IH 80 and IH 160 Dry Vacuum PumpsEdwards Vacuum Part Number 40801728 These Edwards Fourth Stage X Rotors are for Edwards IH 80 and IH 160 Dry Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards Second Stage Y Rotor Claw for the Edwards IH 80 and IH 160 dry vacuum pumps Edwards Vacuum Part Number 40801725 These Edwards Second Stage Rotors are for the Edwards IH 80 and IH 160 Dry Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards Third Stage Y Rotor Claw for the IH 80 and IH 160 Dry Vacuum Pumps Edwards Vacuum Part Number 40801727 These Edwards Third Stage Y Rotors are for the Edwards IH 80 and IH 160 Dry Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards Fourth Stage Y Rotor Claw for the IH 80 and IH 160 Dry Vacuum Pumps Edwards Vacuum Part Number 40801729 These Edwards Fourth Stage Y Rotors are for Edwards IH 80 and IH 160 Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards HV Rotor Claw for the IH 80 and IH 160 Dry Vacuum PumpsEdwards Vacuum Part Number 40801723 These Edwards HV Rotors are for the Edwards IH 80 and IH 160 Dry Vacuum Pumps. Exploded view of part is available by downloading .pdf below at AVAILABLE DOWNLOADS.

Edwards LV Rotor for the IH 80 and IH 160 Dry Vacuum Pumps Edwards Vacuum Part Number 40801730 These Edwards LV Rotors are for the Edwards IH 80 and IH 160 Vacuum Pumps. Exploded view of part is available by downloading .pdf to the side at Downloads.

NEW Edwards Exhaust Check Valve for IH, QDP, IQDP Dry Pumps, KF 40 Connection FlangesThese Edwards vacuum pump exhaust check valves are typically used to help prevent air from rushing backward through the pump during powered down. They are simply a one-way valve, they are design to inhibit the backwards airflow. Even with one of these check valves install the pump will eventually increase to atmospheric pressure. These check valves are helpful to efforts to prevent process powder from being sweep backwards with a large air rush. They are typically used on Edwards dry semiconductor pumps, iH, QDP, & iQDP dry pumps.

NEW Edwards Exhaust Check Valve KIT for IH, QDP, IQDP Dry Pumps, KF 40 Connection FlangesThis is an Edwards vacuum pump exhaust check valve kit. It typically is used to help prevent air from rushing backward through the pump during powered down. They are simply a one-way valve, and are designed to inhibit the backwards airflow. Even with one of these check valves installed the pump will eventually increase to atmospheric pressure. These check valves are helpful in efforts to prevent process powder from being swept backwards with a large air rush. They are typically used on Edwards dry semiconductor pumps, iH, QDP, & iQDP dry pumps.Exhaust Check Valve Kit Includes: (2) KF-40 Hinge Clamps(2) KF-40 Overpressure Centering Rings(1) KF-40 Exhuast Check Valve(1) KF-40 90 Degree Elbow Stainless Steel

Edwards iXL Dry Semiconductor Pump Plug Used to Make Power Cable for iXL Series Vacuum Pumps. This is a Edwards iXL dry semiconductor pump plug kit to make input mains power cable for Edwards iXL series semiconductors vacuum pumps. Works with iXL120 and other models.

Edwards EMO Cable for Installing A New-Style iXL or iXH Series Dry Semiconductor Pump On A Tool With Existing Old-Style iH Series Pumps. Ideal Vacuum supplies our own interface cable, which allows replacement of an older style iH series pump with the style IXL120N, iXH100, or iXH610. This EMO cabling is useful for applications where a semiconductor tool has multiple old style iH pumps attached in the sub fab. This interface module cable continues the EMO circuit across the remaining old-style iH pumps and through the new style iXL120N replacement pump. The connections and different interface modules are described in detail below. This cable is typically connected from P2 (output) of iTIM on left side iH, to Emergency Stop (EMS) connector on iXL120N, to J1 (input) of iTIM on right side iH pump (see details in our Application Note in pdf format). The issue is that the Edwards iH series pumps are now discontinued and no longer available. Ideal Vacuum stocks the replacement pumps, iXL120N for load lock, iXH100 (replaces iH80), iXH610 (replaces iH600), and so on. The new iXL120N pump does not have an EMO button on the front like the old style IH pumps (see details in our Application Note). The Edwards iTIM was often configured with older style Edwards iH series dry semiconductor vacuum pumps where multiple pumps are connected to a single semiconductor tool in the sub-fab. The EMO cabling is set up to shut down the tool if an EMO is pressed on any of the iH series pumps, they are typically cabled in series, in a daisy chain configuration.

Edwards iTIM E73 & Al & T1 & Gate Valve Control for iH pumps. PN: D37420000. An iTIM may be used to provide control and monitoring of the IH pump by your Process Tool, using a parallel digital interface. The iTIM has a number of advanced features. • Digital connections for up to 3 different types of tool interface on each iTIM.• Convenient mounting on the rear of the pump, rapid two point fixing.• Configurable connectivity to enable AUC functionality to be readily customised.• Gate valve control is included in this module as standard.• The iTIM has a set point store, which allows pump set points relating to a particular process or recipe to be saved. These set points are automatically to be loaded into pump on power up, including new pumps when one is replaced. Where these modules already exist they may be utilised to provide control and monitoring of the pump by your Process Tool or other control equipment. For example a pump may be upgraded from an iH to an iHs without changing the interface module. However the iTIM provides improved performance over the iM modules, for example full AUC functionality is only available using the iTIM. The iTIM is recommended on all new installations. For further instructions call us at 505-872-0037.