Thermo Scientific Lindberg/Blue M 1200°C Split-Hinge Single Heating Zone Tube Furnace, 120V, 50/60 Hz, Temperature Range 100° to 1200° C, Heated Zone 30.5 cm (12 in.), Tube O.D. 2.54 to 7.62 cm (1 to 3in.) for use with the CC58114PBCOMA-1 (P1013927). Thermo Scientific Part Number: HTF55322A These Thermo Scientific Lindberg/Blue M tube furnaces have a 30.5 cm (12 in.) heated zone and operating temperature range between 100° to 1200 °C. They can accept tubes sizes with outer diameters of 2.54 to 7.62 cm (1 to 3in.), have a split-hinge clam shell design for easy access, and operate on 1-Phase 120 VAC at 50/60 Hz input power. They are configurable for horizontal or vertical use and include patented Moldatherm LGO™ heating element modules for superior radial and linear temperature uniformity. These Thermo Scientific Lindberg/Blue M tube furnaces have part number: HTF55322A. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnace controller with part number CC58114PBCOMA-1, also sold as Ideal Vacuum part number P1013927. We also offer the interchangeable Moldatherm tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. For optimal performance in vacuum tube furnace applications, we recommend using process tubing made from stainless steel, quartz, or ceramic. These materials maintain structural integrity and resist contamination under high-temperature, low-pressure conditions. To ensure a reliable vacuum seal and protect against heat, we offer water-cooled compression fittings designed to connect securely to the ends of these tubes. These fittings withstand the intense thermal radiation emitted from the glowing hot tube, maintaining both seal integrity and equipment longevity. Specification: Temperature Range 100° to 1200° C Heated Zone Length: 30.5 cm (12 in.) Tube Outer Diameters: 2.54 to 7.62 cm (1 to 3in.) Input Power: 1-Phase 120 VAC at 50/60 Hz Tube Furance Part Number: HTF55322A Tube Furance Controller (Sold Separately): CC58114PBCOMA-1 Key Features Moldatherm™ LGO™ heating element modules for superior radial and linear temperature uniformity and fast heatup and cooldown Long-life, energy-efficient elements require little or no maintenance Unique cabinet design achieves lower exterior surface temperature Heat-reflecting element support assembly creates two highly effective insulating air spaces Compact cabinet with high temperature-resistant painted finish Accepts interchangeable Moldatherm tube adapters Long-life Platinel™ II thermocouple(s) with 10ft. compensated lead wire and polarized plug Required Accessories: Independent digital temperature control module (sold separately) with programmable heating control, part number CC58114PBCOMA-1. Tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. These tube furnaces are a stocked product and typically have a short lead-time. They are new and come with manufacturer’s warranty.

Thermo Scientific Lindberg/Blue M 1200°C Split-Hinge Single Heating Zone Tube Furnace, 208/240 VAC, 50/60 Hz, Temperature Range 100° to 1200° C, Heated Zone 30.5 cm (12 in.), Tube O.D. 2.54 to 7.62 cm (1 to 3in.) for use with the CC58114PBCOMC-1 (P1013928). Thermo Scientific Part Number: HTF55322C These Thermo Scientific Lindberg/Blue M tube furnaces have a 30.5 cm (12 in.) heated zone and operating temperature range between 100° to 1200 °C. They can accept tubes sizes with outer diameters of 2.54 to 7.62 cm (1 to 3in.), have a split-hinge clam shell design for easy access, and operate on 1-Phase 208/240 VAC at 50/60 Hz input power. They are configurable for horizontal or vertical use and include patented Moldatherm LGO™ heating element modules for superior radial and linear temperature uniformity. These Thermo Scientific Lindberg/Blue M tube furnaces have part number: HTF55322A. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnace controller with part number CC58114PBCOMC-1, also sold as Ideal Vacuum part number P1013928. We also offer the interchangeable Moldatherm tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. For optimal performance in vacuum tube furnace applications, we recommend using process tubing made from stainless steel, quartz, or ceramic. These materials maintain structural integrity and resist contamination under high-temperature, low-pressure conditions. To ensure a reliable vacuum seal and protect against heat, we offer water-cooled compression fittings designed to connect securely to the ends of these tubes. These fittings withstand the intense thermal radiation emitted from the glowing hot tube, maintaining both seal integrity and equipment longevity. Specification: Temperature Range 100° to 1200° C Heated Zone Length: 30.5 cm (12 in.) Tube Outer Diameters: 2.54 to 7.62 cm (1 to 3in.) Input Power: 1-Phase 208/240 VAC at 50/60 Hz Tube Furance Part Number: HTF55322C Tube Furance Controller (Sold Separately): CC58114PBCOMC-1 Key Features Moldatherm™ LGO™ heating element modules for superior radial and linear temperature uniformity and fast heatup and cooldown Long-life, energy-efficient elements require little or no maintenance Unique cabinet design achieves lower exterior surface temperature Heat-reflecting element support assembly creates two highly effective insulating air spaces Compact cabinet with high temperature-resistant painted finish Accepts interchangeable Moldatherm tube adapters Long-life Platinel™ II thermocouple(s) with 10ft. compensated lead wire and polarized plug Required Accessories: Independent digital temperature control module (sold separately) with programmable heating control, part number CC58114PBCOMC-1. Tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. These tube furnaces are a stocked product and typically have a short lead-time. They are new and come with manufacturer’s warranty.

Thermo Scientific Lindberg/Blue M 1200°C Split-Hinge Single Heating Zone Tube Furnace, 208/240 VAC, 50/60 Hz, Temperature Range 100° to 1200° C, Heated Zone 61 cm (24 in.), Tube O.D. 2.54 to 7.62 cm (1 to 3in.) for use with the CC58114PBCOMC-1 (P1013928). Thermo Scientific Part Number: HTF55342C These Thermo Scientific Lindberg/Blue M tube furnaces have a 61 cm (24 in.) heated zone and operating temperature range between 100° to 1200 °C. They can accept tubes sizes with outer diameters of 2.54 to 7.62 cm (1 to 3in.), have a split-hinge clam shell design for easy access, and operate on 1-Phase 208/240 VAC at 50/60 Hz input power. They are configurable for horizontal or vertical use and include patented Moldatherm LGO™ heating element modules for superior radial and linear temperature uniformity. These Thermo Scientific Lindberg/Blue M tube furnaces have part number: HTF55342C. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnace controller with part number CC58114PBCOMC-1, also sold as Ideal Vacuum part number P1013928. We also offer the interchangeable Moldatherm tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. For optimal performance in vacuum tube furnace applications, we recommend using process tubing made from stainless steel, quartz, or ceramic. These materials maintain structural integrity and resist contamination under high-temperature, low-pressure conditions. To ensure a reliable vacuum seal and protect against heat, we offer water-cooled compression fittings designed to connect securely to the ends of these tubes. These fittings withstand the intense thermal radiation emitted from the glowing hot tube, maintaining both seal integrity and equipment longevity. Specification: Temperature Range 100° to 1200° C Heated Zone Length: 61 cm (24 in.) Tube Outer Diameters: 2.54 to 7.62 cm (1 to 3in.) Input Power: 1-Phase 208/240 VAC at 50/60 Hz Tube Furance Part Number: HTF55342C Tube Furance Controller (Sold Separately): CC58114PBCOMC-1 Key Features Moldatherm™ LGO™ heating element modules for superior radial and linear temperature uniformity and fast heatup and cooldown Long-life, energy-efficient elements require little or no maintenance Unique cabinet design achieves lower exterior surface temperature Heat-reflecting element support assembly creates two highly effective insulating air spaces Compact cabinet with high temperature-resistant painted finish Accepts interchangeable Moldatherm tube adapters Long-life Platinel™ II thermocouple(s) with 10ft. compensated lead wire and polarized plug Required Accessories: Independent digital temperature control module (sold separately) with programmable heating control, part number CC58114PBCOMC-1. Tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. These tube furnaces are a stocked product and typically have a short lead-time. They are new and come with manufacturer’s warranty.

Thermo Scientific Lindberg/Blue M 1200°C Split-Hinge Three Heating Zones Tube Furnace, 208/240 VAC, 50/60 Hz, Temperature Range 100° to 1200° C, Heated Zone 61 cm (24 in.), Tube O.D. 2.54 to 7.62 cm (1 to 3in.) for use with the CC584343PBCOMC-1 (P1013928). Thermo Scientific Part Number: HTF55347C These Thermo Scientific Lindberg/Blue M tube furnaces have a 61 cm (24 in.) three heated zones and operating temperature range between 100° to 1200 °C. They can accept tubes sizes with outer diameters of 2.54 to 7.62 cm (1 to 3in.), have a split-hinge clam shell design for easy access, and operate on 1-Phase 208/240 VAC at 50/60 Hz input power. They are configurable for horizontal or vertical use and include patented Moldatherm LGO™ heating element modules for superior radial and linear temperature uniformity. These Thermo Scientific Lindberg/Blue M tube furnaces have part number: HTF55347C. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnace controller with part number CC584343PBCOMC-1, also sold as Ideal Vacuum part number P1013928. We also offer the interchangeable Moldatherm tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. For optimal performance in vacuum tube furnace applications, we recommend using process tubing made from stainless steel, quartz, or ceramic. These materials maintain structural integrity and resist contamination under high-temperature, low-pressure conditions. To ensure a reliable vacuum seal and protect against heat, we offer water-cooled compression fittings designed to connect securely to the ends of these tubes. These fittings withstand the intense thermal radiation emitted from the glowing hot tube, maintaining both seal integrity and equipment longevity. Specification: Temperature Range 100° to 1200° C Heated Zone Length: 61 cm (24 in.) Tube Outer Diameters: 2.54 to 7.62 cm (1 to 3in.) Input Power: 1-Phase 208/240 VAC at 50/60 Hz Tube Furance Part Number: HTF55347C Heating Zones: Three Tube Furance Controller (Sold Separately): CC584343PBCOMC-1 Key Features Moldatherm™ LGO™ heating element modules for superior radial and linear temperature uniformity and fast heatup and cooldown Long-life, energy-efficient elements require little or no maintenance Unique cabinet design achieves lower exterior surface temperature Heat-reflecting element support assembly creates two highly effective insulating air spaces Compact cabinet with high temperature-resistant painted finish Accepts interchangeable Moldatherm tube adapters Long-life Platinel™ II thermocouple(s) with 10ft. compensated lead wire and polarized plug Required Accessories: Independent digital temperature control module (sold separately) with programmable heating control, part number CC584343PBCOMC-1. Tube adapters, in sizes 1, 1.5, 2, 2.5, and 3-inch OD. These tube furnaces are a stocked product and typically have a short lead-time. They are new and come with manufacturer’s warranty.

Thermo Scientific Lindberg/Blue M 1200°C Split-Hinge Three Heating Zones Tube Furnace, 208/240 VAC, 50/60 Hz, Temperature Range 100° to 1200° C, Heated Zone 91.4 cm (36 in.), Tube O.D. 7.62 to 152.4cm (3 to 6 in.) for use with the CC584343PBCOMC-1 (P1013929). Thermo Scientific Part Number: HTF55667C These Thermo Scientific Lindberg/Blue M tube furnaces have a 91.4 cm (36 in.) three heated zones and operating temperature range between 100° to 1200 °C. They can accept tubes sizes with outer diameters of 7.62 to 152.4cm (3 to 6 in.), have a split-hinge clam shell design for easy access, and operate on 1-Phase 208/240 VAC at 50/60 Hz input power. They are configurable for horizontal or vertical use and include patented Moldatherm LGO™ heating element modules for superior radial and linear temperature uniformity. These Thermo Scientific Lindberg/Blue M tube furnaces have part number: HTF55667C. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnace controller with part number CC584343PBCOMC-1, also sold as Ideal Vacuum part number P1013929. We also offer the interchangeable Moldatherm tube adapters, in sizes 3, 4, 5, and 6-inch OD. For optimal performance in vacuum tube furnace applications, we recommend using process tubing made from stainless steel, quartz, or ceramic. These materials maintain structural integrity and resist contamination under high-temperature, low-pressure conditions. To ensure a reliable vacuum seal and protect against heat, we offer water-cooled compression fittings designed to connect securely to the ends of these tubes. These fittings withstand the intense thermal radiation emitted from the glowing hot tube, maintaining both seal integrity and equipment longevity. Specification: Temperature Range 100° to 1200° C Heated Zone Length: 91.4 cm (36 in.) Tube Outer Diameters: 7.62 to 152.4cm (3 to 6 in.) Input Power: 1-Phase 208/240 VAC at 50/60 Hz Tube Furance Part Number: HTF55667C Heating Zones: Three Tube Furance Controller (Sold Separately): CC584343PBCOMC-1 Key Features Moldatherm™ LGO™ heating element modules for superior radial and linear temperature uniformity and fast heatup and cooldown Long-life, energy-efficient elements require little or no maintenance Unique cabinet design achieves lower exterior surface temperature Heat-reflecting element support assembly creates two highly effective insulating air spaces Compact cabinet with high temperature-resistant painted finish Accepts interchangeable Moldatherm tube adapters Long-life Platinel™ II thermocouple(s) with 10ft. compensated lead wire and polarized plug Required Accessories: Independent digital temperature control module (sold separately) with programmable heating control, part number CC584343PBCOMC-1. Tube adapters, in sizes 3, 4, 5, and 6-inch OD. These tube furnaces are a stocked product and typically have a short lead-time. They are new and come with manufacturer’s warranty.

Thermo Scientific Lindberg/Blue M Heavy-Duty 1200°C Box Furnace, Single Heating zones (100°C to 1,200°C), Digital Programable Controller with Over Temperature Control and Factory Installed RS-485 Digital Communications Port, 120 V, 50/60 Hz, 30A, for use with the HTF55322A Tube Furnace (P1013922). Thermo Scientific Part Number: CC58114PBCOMA-1. These Thermo Scientific Lindberg/Blue M temperature controllers are designed to work with box and tube furnaces with single heated zone and operating temperature range between 100° to 1500 °C. They require 1-Phase 120 VAC at 50/60 Hz input power and can provide up to 30 Amps maximum output to the tube furnace heater. They include the optional RS-485 digital communications port for programmable control to support two-way communication between the furnace and remote computer (RS-232 cables, software and computer are sold separately by Ideal Vacuum). These Thermo Scientific Lindberg/Blue M tube furnace controllers have part number: CC58114PBCOMA-1. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnace with part number HTF55322A, also sold as Ideal Vacuum part number P1013922. Key Features Fully wired with advanced microprocessor-based digital control, solid-state power module, on/off curcuit breaker and thermocouple input jacks for each zone Built-in adjustable high-limit overtemperature protection LED simultaneously displays actual temperature vs. setpoint in °C or °F Designed for operation on 1-Phase 120 VAC 50/60Hz Overtemperature Control Adjustable digital control is factory installed Protects furnace and load in the event of primary control curcuit failure Overrides main controller and shuts off power to furnace if high limit is reached Must be manually reset for safety Operates via magnetic contacts through a signal from an independent thermocouple Lindberg/Blue M digital communication portsRS-485 digital communications is included with programmable control: Two-way communications between furnace and remote computer (cable, software and computer sold separately) Remote monitoring and control of furnace equipment Ability to connect up to 30 furnaces to a single personal computer 9-pin connection ports 1200°C Digital, Single Setpoint Controllers for Split-Hinge Tube Furnace (HTF55322A) Includes one microprocessor-based PID control, 5 programs with 16 segments each includes over temperature control

Thermo Scientific Lindberg/Blue M Heavy-Duty 1200°C Box Furnace, Single Heating Zone (100°C to 1,200°C), Digital Programable Controller with Over Temperature Control and Factory Installed RS-485 Digital Communications Port, 208/240 VAC 50/60 Hz, 15 Amps, for use with the HTF55322C (P1013923) or HTF55342C (P1013924) Tube Furnaces. Thermo Scientific Part Number: CC58114PBCOMC-1. These Thermo Scientific Lindberg/Blue M temperature controllers are designed to work with box and tube furnaces with single heated zone and operating temperature range between 100° to 1500 °C. They require 1-Phase 208/240 VAC at 50/60 Hz input power and can provide up to 15 Amps maximum output to the tube furnace heater. They include the optional RS-485 digital communications port for programmable control to support two-way communication between the furnace and remote computer (RS-232 cables, software and computer are sold separately by Ideal Vacuum). These Thermo Scientific Lindberg/Blue M tube furnace controllers have part number: CC58114PBCOMC-1. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnaces with part numbers HTF55322C (P1013923) or HTF55342C (P1013924). Key Features Fully wired with advanced microprocessor-based digital control, solid-state power module, on/off curcuit breaker and thermocouple input jacks for each zone Built-in adjustable high-limit overtemperature protection LED simultaneously displays actual temperature vs. setpoint in °C or °F Designed for operation on 1-Phase 208/240 VAC 50/60Hz Overtemperature Control Adjustable digital control is factory installed Protects furnace and load in the event of primary control curcuit failure Overrides main controller and shuts off power to furnace if high limit is reached Must be manually reset for safety Operates via magnetic contacts through a signal from an independent thermocouple Lindberg/Blue M digital communication portsRS-485 digital communications is included with programmable control: Two-way communications between furnace and remote computer (cable, software and computer sold separately) Remote monitoring and control of furnace equipment Ability to connect up to 30 furnaces to a single personal computer 9-pin connection ports 1200°C Digital, Single Setpoint Controllers for Split-Hinge Tube Furnaces with part numbers HTF55322C (P1013923) or HTF55342C (P1013924) Includes one microprocessor-based PID control, 5 programs with 16 segments each includes over temperature control

Thermo Scientific Lindberg/Blue M Heavy-Duty 1200°C Box Furnace, Three Heating Zones (100°C to 1,200°C), Digital Programable Controller with Over Temperature Control and Factory Installed RS-485 Digital Communications Port, 208/240V 50/60 Hz, 70 Amps, for use with the HTF55347C (P1013925) or HTF55667C (P1013926) Tube Furnaces. Thermo Scientific Part Number: CC584343PBCOMC-1. These Thermo Scientific Lindberg/Blue M temperature controllers are designed to work with box and tube furnaces with three heated zones and operating temperature range between 100° to 1500 °C. They require 1-Phase 208/240 VAC at 50/60 Hz input power and can provide up to 70 Amps maximum output to the tube furnace heaters. They include the optional RS-485 digital communications port for programmable control to support two-way communication between the furnace and remote computer (RS-232 cables, software and computer are sold separately by Ideal Vacuum). These Thermo Scientific Lindberg/Blue M tube furnace controllers have part number: CC584343PBCOMC-1. For a complete solution, we offer the Lindberg/Blue M 1200°C tube furnaces with part numbers HTF55347C (P1013925) or HTF55667C (P1013926). Key Features Fully wired with advanced microprocessor-based digital control, solid-state power module, on/off curcuit breaker and thermocouple input jacks for each zone Built-in adjustable high-limit overtemperature protection LED simultaneously displays actual temperature vs. setpoint in °C or °F Designed for operation on 1-Phase 208/240 VAC 50/60Hz Overtemperature Control Adjustable digital control is factory installed Protects furnace and load in the event of primary control curcuit failure Overrides main controller and shuts off power to furnace if high limit is reached Must be manually reset for safety Operates via magnetic contacts through a signal from an independent thermocouple Lindberg/Blue M digital communication portsRS-485 digital communications is included with programmable control: Two-way communications between furnace and remote computer (cable, software and computer sold separately) Remote monitoring and control of furnace equipment Ability to connect up to 30 furnaces to a single personal computer 9-pin connection ports 1200°C Digital, Three Zone Heating Setpoint Controller for Split-Hinge Tube Furnaces with part numbers HTF55347C (P1013925) or HTF55667C (P1013926) Includes one microprocessor-based PID control, 5 programs with 16 segments each includes over temperature control