Ideal Vacuum Cube, 6 x 6 inch Non-Thermally Isolated Chamber Plate For Circulating Hot or Cold Fluids. This is a non-thermally isolated Ideal Vacuum Cube 6 x 6 inch TVAC plate with 3/8” OD fluid tubes. This plate allows the vacuum side of the plate to be thermally controlled by circulating hot or cold fluids through its stainless steel tubes and internal cavity. The operating range of this plate is 150°C to -26°C (302°F to -15°F). This thermal vacuum Cube plate allows the Ideal Vacuum Cube to be used as a thermal vacuum or thermal shock vacuum chamber. It can also function as a chilled trap for chemical and high boiling point liquids. Multiple TVAC plates may be mounted to a Cube and plumbed together to enhance temperature control capability. Fluid is commonly supplied by a recirculating heater or chiller such as those made by Thermo Scientific, Neslab, and Huber. Insulated supply and return hoses connect the heater/chiller system to the thermal plate with 3/8" OD tube fittings. The plate’s core is made of 6061-T6 Aluminum and has an optical breadboard on the vacuum side with a 3.0" x 3.0" temperature-controlled area. Because the thermal cavity is not thermally isolated from the rest of the plate, operating temperatures are limited to that of the plate’s Viton O-ring vacuum seal. The plate is designed to occupy minimal volume within the Cube envelope and may be mounted in any orientation. Features: 6" x 6" plate size Blue powder coated 6061-T6 aluminum plate 3/8” OD stainless steel supply and return tubes Operating temperature range 150°C to -26°C (302°F to -15°F) 3.0" x 3.0" temperature-controlled core Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6 x 6 x 6 6 x 6 x 12 6 x 6 x 6 hexagon 6 x 6 x 12 hexagon 6 x 6 x 12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube, 6 x 6 inch Thermal Vacuum Chamber Plate For Circulating Hot or Cold Fluids. This is a thermally isolated Ideal Vacuum Cube 6 x 6 inch TVAC plate with 3/8” OD vacuum isolated fluid tubes. This plate allows the vacuum side of the plate to be thermally controlled by circulating hot or cold fluids, including LN2 through its stainless steel tubes and internal channels. The operating temperature range of this plate is 200°C to -200°C (392°F to -328°F). This Cube plate allows the Ideal Vacuum Cube to be used as a thermal vacuum or thermal shock vacuum chamber. It can also function as a chilled trap for chemical and high boiling point liquids. Multiple TVAC plates may be mounted to a Cube and plumbed together to enhance temperature control capability. Fluid is commonly supplied by a recirculating heater or chiller such as those made by Thermo Scientific, Neslab, and Huber. Insulated supply and return hoses connect the heater/chiller system to the thermal plate with 3/8" OD tube fittings. The core of the plate is made of 304L stainless steel and has an optical breadboard on the vacuum side with a 3.0" x 3.0" temperature-controlled area. The plate’s thermally isolated core allows it to be operated between 200°C to -200°C (392°F to -328°F) without compromising vacuum seal integrity. The plate is designed to occupy minimal volume within the Cube envelope and may be mounted in any orientation. Features: 6" x 6" plate size Blue powder coated 6061-T6 aluminum plate 3/8” OD stainless steel supply and return tubes Operating temperature range 200°C to -200°C (392°F to -328°F) Stainless steel vacuum isolated 3.0 x 3.0" temperature-controlled core 3.0" x 3.0" temperature-controlled core Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6 x 6 x 6 6 x 6 x 12 6 x 6 x 6 hexagon 6 x 6 x 12 hexagon 6 x 6 x 12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube Cooling Plate Adapter Kit Connects Two Thermal Fluid 12x12 Plates to One Chiller. This cooling plate adapter kit is used to connect two Ideal Vacuum Cube 12x12 cooling plates (P108474) to one Thermo Scientific Neslab model Arctic, AC200 A25, AC200 A40, or Accel 500LT cooler. The kit branches the main cooling line off to a secondary cooling plate attached to a second 12x12 Ideal Vacuum Cube, allowing both chambers to be chilled in conjunction with one single chiller. This cooling plate adapter kit comes with: 5ft length of 1/2" ID insulated hose (x2) 3/8" x 1/2" OD tube adapters (x2) 1/2" x 1/2" x 1/2" OD Stainless Steel Barbed Tee (x2) #10 Stainless Steel Clamps (x4)

ThermoTek T257P ThermoElectric Recirculating Chiller 210 Watts Cooling, 100-240 VAC 50/60. ThermoTek Part Number: 0P9T257P20. The T257P is a compact thermoelectric water chiller that offers 210 watts of cooling with a variable speed 21.75 psi centrifugal pump. This unit has a touch screen interface, is solid-state and contains no refrigerant or compressor, has low noise and vibration, and has excellent temperature stability of ±0.1°C at constant ambient temp. The thermoelectric chip allows for both heating and cooling applications, with a temperature range of -5°C to +45°C. This chiller is excellent for laboratory use, cooling of laser systems which require precise temperature control, cooling of small vacuum chamber components, defense applications and much more. For connectivity, the unit is compatible with USB and RS-23. FEATURES 210 Watts cooling capacity 21.75 psi / 3.8 LPM centrifugal pump Variable speed pump Weighs only 16 lbs (7.3 kg) Touch screen interface Low noise and vibration Integrated carry handle Universal power supply Leak-free QD fittings USB and RS-232 connectivity APPLICATIONS Laboratory Laser Cooling X-Ray Systems Medical Equipment Analytical Equipment Vacuum Chamber Application Defense Applications Semiconductor Applications SYSTEM PERFORMANCE Thermal Performance: Up to 210 Watts cooling @ 0° DTStability: +/- 0.1°C @ >=0.6 LPM flow at constant load & constant ambient tempFlow Rate Availability: up to 4.0 LPM (open flow water)Pressure Availability: up to 1.5 Bar (21.75 psi) max pressureTemperature Range: -5°C to +45°CInput Voltage: 100—240 VAC 50 / 60 HzInput Power: 600 Watts max

NEW Thermo Scientific Haake ARCTIC SC150 A25 Refrigerated Bath Circulator, Neslab RTE7 & RTE10 Digital One Replacement Thermo Fisher pn: 1535258 The Thermo Fisher Scientific Neslab RTE7 and RTE10 chillers were extremely popular in the scientific and research communities but have now been discontinued and replaced by the NEW Thermo Fisher Haake Arctic SC150-A25 chiller. The Arctic SC150-A25 chiller is a good replacement option having basically the same specifications as the older Neslab RTE 7 and RTE 10 chillers. These chillers offer the SC150 heated immersion circulator controller and has the following features: 500W cooling capacity at 20°C 230V/115V 12 liter stainless steel immersion bath Temperature range of -25°C to 150°C Maximum temperature: 150 °C Flow Rate is 17 liters per minute Voltage Requirement: 115VAC 60Hz Five programmable set point temperatures Real Temperature Adjustment (RTA) for calibration Two levels of pump speed adjustment to increase flow or bath agitation Three languages (English, German & French) Change digital display resolution between 0.1 and 0.01 and between °C - °F - °K Acoustic and visual alarm Auto-Restart feature after loss of power Early warning alert for fluid refill Controller Head can be indexed 90° to the right or left for easy display view Energy Saving Mode option available for applications running under a stable load Automatic controller shut-down at detection of high temperature, low liquid or motor overload Communication options: RS232, RS485, Ethernet/LAN and Analog I/O The Thermo Scientific HAAKE ARCTIC SC150 A25 refrigerated circulator bath chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. These robust, compact units offer precise temperature stability and high reliability for external circulation and in-bath applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. This ARCTIC HAAKE SC150-A25 Immersion Bath Circulator by NESLAB provides excellent agitation in the bath for improved uniformity and stability. The controller technology ensures that the ARTIC A25 performs at its peak. This unit is an economical investment with capabilities that meet a wide range of application needs, and is designed for years of reliable service. This Thermo Scientific NESLAB SC150 Arctic A25 chiller bath circulator has a SC150 Thermostat Model with temp range of -25°C to +150°C, Flow 17L/min., Stainless Steel 12 liter (3 gallon) Bath , 115V 60Hz, see ad below. This is Brand New and comes with 3 year manufacture warranty. A user’s manual and specification brochure is available by downloading the PDFs below from (AVAILABLE DOWNLOADS).

Thermo Scientific Tubing Connection Kit for Thermo Haake ARCTIC AC200 series, 3/8 & 1/2 inches(8 & 12mm) OD barb. Thermo Scientific Part Number 1600030 These Thermo Scientific Neslab tubing connection kits are designed to work with the Arctic AC200 series chillers.

Ideal Vacuum Cube 6 x 6 Thermal Vacuum TVAC Chamber Plate for Liquid Nitrogen LN2 Cryogenic Testing and High Vacuum Trap. This is an Ideal Vacuum Cube 6 x 6 inch TVAC plate for cryogenic testing and for trapping condensable gas vapors under high vacuum such as water and solvents that outgas from components inside the vacuum. Without appropriate trapping, condensable vapors can intrude into the mechanical pump, limiting the ultimate base pressure of the pump to unacceptably high levels. This TVAC plate produces lower base pressures and faster pump down cycles. This plate may be operated at temperatures as low as -200°C (-328°F) The plate is mounted to the top of the Cube with the LN2 fill port oriented vertically. Once under vacuum, liquid nitrogen is poured into the fill port and enters the plate’s 0.14 liter internal fluid reservoir. The reservoir is made of 304L stainless steel and has an optical breadboard on the vacuum side with a 3.0" x 3.0" temperature-controlled area. It is designed to occupy minimal volume within the Cube. The reservoir is thermally isolated from the blue powder coated 6061-T6 aluminum mounting plate and allows the plate to be operated to -200°C (-328°F) without compromising vacuum seal integrity. Because the LN2 continuously evaporates through the open fill port, it requires about 1 liter of LN2 to cool the vacuum side of the plate to minimal temperature. Features: 6" x 6" plate size Blue powder coated 6061-T6 aluminum plate 304L stainless steel reservoir and fill port Operating temperature to -196°C (-321°F) Stainless steel vacuum isolated 3.0" x 3.0" temperature-controlled core Internal optical breadboard Mounts horizontally on top of chamber only Directly mounts to frame size: 6 x 6 x 6 6 x 6 x 12 6 x 6 x 6 hexagon 6 x 6 x 12 hexagon 6 x 6 x 12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Cryogenic Gloves Low Temperature LN2 Liquid Nitrogen Protective Gloves, Safety Frozen Gloves. These protective gloves should be use for safety protection whenever are handling Liquid Nitrogen (LN2), low temperatures, frozen laboratory. These Cryogenic gloves are made with 3 layers: 2 layers are composite material Nylon Taslan and PTFE, and 1 layer is cotton. They are made to fit all sizes and fit most hands. Glove length (finger to end): Wrist Length: 13 in., Mid Arm Length: 15 in., Elbow Length: 19 in., Shoulder Length: 27 in. Low temperature fit: -268°C~+148°C/-450°F~298°F. Cold and keep warm. These gloves should be stored in a dry place.

Solid Cryogenic Gloves LN2 Liquid Nitrogen Protective Gloves, Low Temperature LN2 Liquid Nitrogen Protective Gloves, Safety Frozen Gloves. These protective gloves are specially designed for working around Liquid Nitrogen (LN2), should be used for safety protection whenever are handling Liquid Nitrogen (LN2), low temperatures, or in a frozen laboratory. These Cryogenic gloves have multiple layers of high industrial quality insulating material to protect you. No closure, hand wash, light, comfortable, heavy-duty, and water resistant. 35 cm (13.8") long. Two in one pack.

Ratchet Headgear and Visor Combination with 3M WP96 Clear Polycarbonate Faceshield Safety System. These safety system comes with 3M H8A headgear and WP96 clear faceshield together. Headgear is made of Aluminum and thermoplastic. The five-position crown strap and thirteen position ratchet suspension offer customization to individual wearers. The faceshield is made of durable, polycarbonate, is 0.08 in. thick and features a molded shape. Headgear assembly is designed to fit most hard hats and can be combined with 3M W-Series Faceshields. Durable, versatile, and does not interfere with most cap-mounted earmuffs. This gives users a wide choice of faceshield materials, sizes, shapes, and tints for task specific requirements. The faceshield attaches quickly to any 3M Headgear without tools, snaps, or cams. Meets the requirements for ANSI Z87.1-2010.

Ideal Vacuum XtremeFreez Cryogenic Vacuum Jacketed Hose 3/8" ID, 6’ Length, for Liquid Nitrogren LN2 Transfer Process at -320°F (-196°C). Our Ideal Vacuum XtremeFreez transfer hoses are maintenance-free, durable, frost-free cryogenic transfer lines for use with liquid nitrogen, rated down to -320°F (-196°C). They are amazing, even with liquid nitrogen flowing through the hose, the outer surface remains at room temperature and is safe to touch with bare hands, reduced nitrogen consumption saves you money. Our Ideal Vacuum XtremeFreez Vacuum Jacketed Transfer Hose are the most thermally efficient transfer hose available, reducing liquid nitrogen loss during use. Cooldown losses are reduced by our lightweight inner tubing. Improved productivity and higher quality liquid with lower gas content at the point of use improves cryogenic cooling efficiency. Rapid hose cooldown reduces cooling time and speeds liquid cryogen delivery to the use point, outer surface is safe to the touch, even when used with liquid nitrogen, hazardous ice and dripping water is reduced, increasing safety.

Ideal Vacuum XtremeFreez Cryogenic Solenoid Valve, For Liquid Nitrogren LN2 Cylinder Transfer Processes, has a working temperature range of -350 to 400 degrees Fahrenheit. Our Ideal Vacuum XtremeFreez Solenoid Valves are built to withstand the extreme cold of liquid nitrogen LN2 and liquid oxygen service, these valves are cleaned and bagged for high-purity applications. They are electrically operated to automatically start and stop cryogenic flow, they require 120 VAC at 2 Amps. These valves are normally-closed (NC), the actuator is directly mounted to the valve body to minimize movement and reduce wear, the outer body is made of bronze, and has a working temperature range of -350 to 400 degrees Fahrenheit. These solenoid valves are typically used with Liquid Argon, Liquid Nitrogen, or Liquid Oxygen service, they have ½ Inch female pipe thread (FNPT) connections.

Cyl-Tec 180-HP Cryogenic Liquid Cylinder HP Pressure, for Liquid Nitrogen (LN2) Service, with Digital Liquid Level Gauge. Ideal Vacuum Xtreme-Freez 180 Liter Cryogenic Liquid Cylinder HP Pressure. The Cyl-Tec 180-HP Cryogenic Liquid Cylinder, HP Pressure, are ideal for both liquid or gas, use up to 350 PSI Maximum Allowable Working Pressure (MAWP). They are configured for liquid nitrogen (LN2) service and includes a digital fluid level gauge. They have a dent-resistant tank outer shell, all stainless steel construction, a 4-handling ring supports, heavy-duty foot ring, with round bottom, and square caster bases. They have a superior product holding time and come with a 5-year warranty on vacuum. Dimensions Diameter: 20" Height: 64.5" Tare Weight: 305 lbs.

Cyl-Tec 200-HP Cryogenic Liquid Cylinder HP Pressure, for Liquid Nitrogen (LN2) Service, with Digital Liquid Level Gauge. Ideal Vacuum Xtreme-Freez 200 Liter Cryogenic Liquid Cylinder HP Pressure. The Cyl-Tec 200-HP Cryogenic Liquid Cylinder, HP Pressure, are ideal for both liquid or gas, use up to 350 PSI Maximum Allowable Working Pressure (MAWP). They are configured for liquid nitrogen (LN2) service and includes a digital fluid level gauge. They have a dent-resistant tank outer shell, all stainless steel construction, a 4-handling ring supports, heavy-duty foot ring, with round bottom, and square caster bases. They have a superior product holding time and come with a 5-year warranty on vacuum. Dimensions Diameter: 20" Height: 66.4" Tare Weight: 314 lbs.

Cyl-Tec 200-VHP Cryogenic Liquid Cylinder VHP Pressure for Liquid Nitrogen (LN2) Service, with Digital Liquid Level Gauge. Ideal Vacuum Cryogenic 200 Liter liquid cylinder, VHP Pressure. The Cyl-Tec 200-VHP Cryogenic Liquid Cylinder, VHP Pressure, are ideal for both liquid or gas, use up to 500 PSI Maximum Allowable Working Pressure (MAWP). They are configured for liquid nitrogen (LN2) service and includes a digital fluid level gauge. They have a dent-resistant tank outer shell, all stainless steel construction, a 4-handling ring supports, heavy-duty foot ring, with round bottom, and square caster bases. They have a superior product holding time and come with a 5-year warranty on vacuum. Dimensions Diameter: 20" Height: 64.6" Tare Weight: 366 lbs.

Cyl-Tec 240-HP Liter Cryogenic Liquid Cylinder HP Pressure, for Liquid Nitrogen (LN2) Service, on Wheels, with Digital Liquid Level Gauge. Ideal Vacuum Xtreme-Freez 240 Liter Cryogenic Liquid Cylinder HP Pressure. The Cyl-Tec 240-HP Liter Cryogenic Liquid Cylinder, 240 liter liquid cylinders, are ideal for both liquid or gas, use up to 350 PSI Maximum Allowable Working Pressure (MAWP). They are configured for liquid nitrogen (LN2) service and include a digital fluid level gauge They have a dent-resistant tank outer shell, all stainless steel construction, 4-handling ring supports, heavy-duty foot ring with round bottom, and square caster bases. They have superior product holding time and come with a 5-year warranty on vacuum. Dimensions Diameter: 26" Height: 57" Tare Weight: 408 lbs.