MKS Vacuum Sentry® Safety Anti-Suck Back Isolation Valve, KF25, Viton seals, with Solenoid Voltage of 115VAC. PN: 145-0025K-120V/60. Vacuum Pump Isolation Valve KF25 115 VAC. Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. The middle graphic above shows an example of possible electrical hookup. Valve electrical hookup connectors ARE NOT supplied but are available upon request. FEATURESReliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

MKS Vacuum Sentry® Safety Anti-Suck Back Isolation Valve, KF25, Viton seals, with Solenoid Voltage of 220VAC. PN: 145-0025K-220V/50-60. Vacuum Pump Isolation Valve KF25 220 VAC. Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. The middle graphic above shows an example of possible electrical hookup. Valve electrical hookup connectors ARE NOT supplied but are available upon request. FEATURESReliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

MKS Vacuum Sentry® Safety Anti-Suck Back Isolation Valve, KF40, Viton seals, with Solenoid Voltage of 115VAC. PN: 145-0040K-120V/60. Vacuum Pump Isolation Valve KF40 115 VAC. Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. The middle graphic above shows an example of possible electrical hookup. Valve electrical hookup connectors ARE NOT supplied but are available upon request. FEATURESReliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

Vacuum Pump Anti-Suck Back Isolation Valve - Protects Your Vacuum System When Powered Down - KF40 - 220VAC PN: 145-0040K-220V/50-60Vacuum Pump Isolation Valve KF40 220 VAC. Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. The middle graphic above shows an example of possible electrical hookup. Valve electrical hookup connectors ARE NOT supplied but are available upon request. The Agilent Varian Vacuum Pump Isolation Valves offer the following features to users: Reliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

MKS Vacuum Sentry® Safety Valve, Anti-Suck Back Isolation Valve, KF50, Viton seals, and a Solenoid Voltage of 115VAC. MKS Part Number: 145-0050K-120V/60. Vacuum Pump Isolation Valve KF50 120 VAC. Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. The middle graphic above shows an example of possible electrical hookup. Valve electrical hookup connectors ARE NOT supplied but are available upon request. FEATURESReliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10-9 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

MKS Vacuum Sentry® Safety Anti-Suck Back Isolation Valve, KF50, Viton seals, with Solenoid Voltage of 220VAC. PN: 145-0050K-220V/60. Vacuum Pump Isolation Valve KF50 220 VAC. Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. The middle graphic above shows an example of possible electrical hookup. Valve electrical hookup connectors ARE NOT supplied but are available upon request. FEATURESReliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

MKS Vacuum Sentry® Safety Anti-Suck Back Isolation Valve, KF25, Viton seals, with Solenoid Voltage of 24VDC. PN: 145-0025K-24VDC Vacuum Pump Isolation Valve KF25 24 VDC. Includes a Isolation valve, a communication cable, and a 24 VDC power supply, and a splitter cord. (This Isolation valve is for the TriScroll 300 Inverter Scroll Pump ONLY.) The MKS valve is controlled by an output signal from the TriScroll Inverter Scroll Pump that is tied to motor operation. It Closes rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This isolation valve body is constructed of lightweight aluminum and the body design and right-angle configuration provide maximum conductance. Valve electrical hookup connectors ARE NOT supplied but are available upon request. FEATURESReliable and repeatable seals with a lock-over-center mechanism with a leak rate of < 1x10 std cc/sec He Fast-acting, immediate protection of your vacuum system in case of power failure, valve closes in < 30 milliseconds Allows venting of the pump at the pump inlet, flow direction is maintained; oil/debris are not swept into the system Offers continued protection and easy restart by staying closed until pump inlet pressure returns to system pressure Operates with atmospheric pressure and is activated upon loss of electrical power, compressed air NOT required for operation Provides maximum conductance of 13 l/s for the NW25 valves and 33 l/s for the NW40 valves without reducing the pumping speed A temperature range of 0° to 100° C for the Valve and 0° to 50° C for the Soleniod

Replacement Solenoid for Ideal Vac Delta-P, MKS, Anti-Suckback Isolation Protection Valve, 110VAC, 60Hz. 1/8 inch Female NPT Vacuum Pump Isolation Valves close rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This solenoid valve has Viton® seals and can withstand temperatures up to 50°C. It replaces a faulty or failed solenoid on all models of the Ideal Vacuum Delta-P or MKS Anti-Suckback Isolation Protection Valves. Replacement solenoids are available in these voltages: 110VAC (P108430) 220VAC (P108431) 24VDC (P1010132) All solenoid voltage variations fit all Ideal vacuum Delta-P, MKS Anti-Suckback valve models. So, this replacement solenoid can replace a solenoid with a different voltage should your application requirements change.

Replacement Solenoid for Ideal Vac Delta-P, MKS Anti-Suckback Isolation Protection Valves, 220VAC, 60Hz. 1/8 inch Female NPTVacuum Pump Isolation Valves close rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This solenoid valve has Viton® seals and can withstand temperatures up to 50°C. It replaces a faulty or failed solenoid on all models of the Ideal Vacuum Delta-P and MKS Anti-Suckback Isolation Protection Valves. Replacement solenoids are available in these voltages: 110VAC (P108430) 220VAC (P108431) 24VDC (P1010132) All solenoid voltage variations fit all Ideal vacuum Delta-P and MKS Anti-Suckback valve models. So, this replacement solenoid can replace a solenoid with a different voltage should your application requirements change.

Replacement Solenoid for Ideal Vac Delta-P and MKS Anti-Suckback Isolation Protection Valves, 24VDC. 1/8 inch Female NPTVacuum Pump Isolation Valves close rapidly when power is interrupted to prevent oil backstreaming or particle migration into your vacuum system. The valve also vents the pump from the inlet side to push any debris towards the outlet, thereby preventing it from being swept into the system when restarting the pump. This solenoid valve has Viton® seals and can withstand temperatures up to 50°C. It replaces a faulty or failed solenoid on all models of the Ideal Vacuum Delta-P and MKS Anti-Suckback Isolation Protection Valves. Replacement solenoids are available in these voltages: 110VAC, 60 Hz (P108430) 220VAC 60 Hz (P108431) 24VDC (P1010132) All solenoid voltage variations fit all Ideal vacuum Delta-P and MKS Anti-Suckback valve models. So, this replacement solenoid can replace a solenoid with a different voltage should your application requirements change.