Ideal Vacuum Cube 24 x 24 x 24 in. Vacuum Chamber Frame Stainless Steel with Door. This is a 24 x 24 x 24 inch bare Ideal Vacuum Cube frame with door. The frame and door are constructed of 304L stainless steel. Each frame side is machined from a single stainless steel plate. The machined frame plates are welded together to form the completed frame. One side of the frame has a hinged stainless steel door with an opening of 21” x 21” and seals with an O-ring. After welding is complete and the door installed, the frame is fully leak tested. The other five frame sides accept twenty 12” x 12” Cube plates (four per side). Plates are mounted to the frame with 1/4"-20 stainless steel screws. Once all plates are installed, the chamber is complete. The door eliminates the need for individual fastener removal, allowing interior access in seconds. The plates can be removed, replaced, or reused as needed to reconfigure the chamber to new requirements. This frame allows a user to build a 24 x 24 x 24 inch modular Cube chamber from scratch. Please see our other listings for 24 x 24 x 24 in. preconfigured chamber development kits and for a large variety of 12 x 12 inch Cube plates. Please download the Cube plate installation manual for installation instructions. A complete 24 x 24 x 24 chamber requires: 24 x 24 x 24 stainless steel frame with door Twenty Cube plates 24 x 24 x 24 Cube hardware kit (P1013728) Optional accessories including feet, viewing windows and doors, thermal, and optical plates Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 in. Coupling Kit Joins Two Cube Frame Faces. This 12 x 12” Cube coupling kit allows two Cube frames to be tightly joined face-to-face on their 12 x 12” faces without any intermediate plumbing or fittings. Same sized Cube faces can be coupled. For example, a 12 x 12 x 12” Cube frame can be directly coupled to a 12 x 12 x 12” frame or a 6 x 12 x 12” frame, as long as they are coupled on the 12 x 12” side. The coupling kit consists of a 6061-T6 aluminum Cube frame coupler with two O-rings, and several 304L stainless steel barrel type, coupling draw bolts. The frame coupler is sandwiched between the two Cube frames and acts just like a flange centering ring. The coupler makes the seal between the two Cube frames and uses the patented Ideal Vacuum Taper-Seal™ design. The draw bolts rigidly clamp the two Cube frames together. The number of chamber configurations possible with Cube coupling kits is virtually limitless. Long, odd-shaped, and multi-Cube chambers are easy to construct with this accessory. Please download the Cube coupling kit user manual for installation instructions. Features: Couples two 12" x 12" Cube faces No extra tubing or fittings needed Includes dual O-ring frame coupler Includes 8 draw bolts Mounts in any orientation Can join these Cube frames on 12 x 12” face: 12 x 12 x 12 6 x 12 x 12

Ideal Vacuum 12 x 12 in. Replacement Cube Frame Coupler Joins Two Cube Frame Faces. This is a replacement 6061-T6 aluminum, 12 x 12" Cube frame coupler with O-ring seals only. This replacement frame coupler is part of the Cube frame coupling kit (P1012248) that allows two 12 x 12 Cube frames to be tightly joined face-to-face without any intermediate plumbing or fittings. The complete coupling kit consists of this 6061-T6 aluminum Cube frame coupler with two O-rings, and several 304L stainless steel barrel type, coupling draw bolts (P107292). The frame coupler is sandwiched between the two Cube frames and acts just like a flange centering ring. The coupler makes the seal between the two Cube frames and uses the patented Ideal Vacuum Taper-Seal™ design. The draw bolts rigidly clamp the two Cube frames together. Same sized Cube faces can be coupled. For example, a 12 x 12 x 12” Cube frame can be directly coupled to a 12 x 12 x 12” frame or a 6 x 12 x 12” frame, as long as they are coupled on the 12 x 12” side. The number of chamber configurations possible with Cube coupling kits is virtually limitless. Long, odd-shaped, and multi-Cube chambers are easy to construct with this accessory. Please download the Cube coupling kit user manual for installation instructions. Features: Replacement 12" x 12" frame coupler only Includes dual O-rings Eight draw bolts required for complete frame coupler kit Can join these Cube frames on 12 x 12” face: 12 x 12 x 12 6 x 12 x 12

Ideal Vacuum Cube Replacement Barrel Type Coupling Draw Bolt. This Ideal Vacuum Cube barrel type coupling draw bolt is used to join together the frames of two separate vacuum cubes to form a larger vacuum chamber configuration. A quantity of at least four draw bolts are needed to join two 6 x 6 x 6" Cubes. Larger Cube sizes require more draw bolts. This is a quantity of 1 replacement draw bolt with nut and made of 304L stainless steel. Use it as a replacement for a lost or damaged one.

Ideal Vacuum Cube Extra Long Barrel Type Coupling Draw Bolt for Coupling Cube Frames with a Plate Adapter In Between. Extra Long Ideal Vacuum Cube barrel type coupling draw bolts are used to join the frames of two Cubes when there is a plate adapter between them. A quantity of at least four draw bolts are needed to join two 6 x 6 x 6 Cubes. Larger Cube sizes require more draw bolts. This is a quantity of 1 extra long draw bolt with nut and made of 304L stainless steel.