Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Agilent IDP-10 Dry Scroll Vacuum Pumps On Sale Agilent TriScroll Pumps On Sale Pfeiffer ASM340 Leak Detectors On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Anest Iwata DVSL-100C-B Oil-Free Dry Scroll Pump, KF-25 Inlet, 4.2 CFM, Single Phase, 100-115/200-230 VAC. PN: DVSL-100C-B
In Stock
1


Anest Iwata DVSL-100C Oil-Free Dry Scroll Pumps, KF-25 Inlet, 4.2 CFM, 2.3x10-1 Torr, Single Phase 100-115/200-230 VAC. Anest Iwata Part Number: DVSL-100C-B. The Anest Iwata DVSL-100C-B oil-free dry scroll pumps operate on a single phase 100-115/200-230 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-100C-B is 4.2 CFM at 60hz, ultimate pressure 3.8x10-1 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a single-phase motor. The operating instructions manual is available for down in PDF format below. Pumping of humid gas by vacuum pump can cause condensed moisture to remain in pump. This remaining moisture can cause failure to ultimate pressure or pump. Air Flush operation is necessary to pump remaining moisture inside the pump. Air Flush operation dose not only pump remaining moisture but also recovers ultimate pressure. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.

Condition: New



Part Number: P1013271



Price: $4,284.00


Regular Price: $4,760.00




Currency: US Dollar (USD)

Anest Iwata DVSL-500E Oil-Free Dry Scroll Pump, KF-25 Inlet, 18.4 CFM, Three Phase Motor, 200-230/380-460 VAC. PN: DVSL-500E
Out of Stock


Anest Iwata DVSL-500E Oil-Free Dry Scroll Pump, KF-25 Inlet, 18.4 CFM, 2.3x10-1 Torr, Three Phase Motor, 200-230/380-460 VAC. Anest Iwata Part Number: DVSL-500E. The Anest Iwata DVSL-500 oil-free dry scroll pumps operate on a three phase motor 200-230/380-460 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-500 is 18.4 CFM at 60hz, ultimate pressure 2.3x10-1 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a single-phase motor. The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.

Condition: New



Part Number: P1013272



Price: $6,890.00


Regular Price: $6,890.00




Currency: US Dollar (USD)

Anest Iwata DVSL-501E Oil-Free Dry Scroll Pump, KF-25 Inlet, 18.4 CFM, Three Phase Motor, 200-230/380-460 VAC. PN: DVSL-501E
Out of Stock


Anest Iwata DVSL-501E Oil-Free Dry Scroll Pump, KF-25 Inlet, 18.4 CFM, 7.5x10-1 Torr, Three Phase Motor, 200-230/380-460 VAC. Anest Iwata Part Number: DVSL-501E. The Anest Iwata DVSL-501E oil-free dry scroll pumps operate on a three phase motor 200-230/380-460 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-501E is 18.4 CFM at 60hz, ultimate pressure 7.5x10-1 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a three-phase motor. The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.

Condition: New



Part Number: P1013273



Price: $6,890.00


Regular Price: $6,890.00




Currency: US Dollar (USD)

Anest Iwata DVSL-501E-HC Oil-Free Dry Scroll Pump, KF-25 Inlet, 18.4 CFM, Three Phase Motor, 200-230/380-460 VAC. PN: DVSL-501E-HC
Out of Stock


Anest Iwata DVSL-501E-HC, Oil-Free Dry Scroll Pump, KF-25 Inlet, 18.4 CFM, 7.5x10-1 Torr, Three Phase Motor, 200-230/380-460 VAC. Anest Iwata Part Number: DVSL-501E-HC. The Anest Iwata DVSL-501E-HC oil-free dry scroll pumps operate on a three phase motor 200-230/380-460 VAC, 50/60 Hz. Displacement for this Anest Iwata DVSL-501E-HC is 18.4 CFM at 60hz, ultimate pressure 7.5x10-1 Torr. This pump offers high performance, compact design and very light, is economical and inexpensive to operate. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. This pump has a three-phase motor. The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.

Condition: New



Part Number: P1013274



Price: $6,732.00


Regular Price: $7,480.00




Currency: US Dollar (USD)

Anest Iwata DVSL-500E Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. PN: DVS-500E
Out of Stock


Anest Iwata DVSL-500E Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. Anest Iwata Part Number: DVS-500E. This Anest Iwata OEM complete pump module for the DVSL-500E dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata DVSL-500 oil-free dry scroll pumps have a pumping speed of 18.4 CFM at 60hz and reach an ultimate vacuum of 2.3x10-1 Torr. The Anest Iwata DVSL-500E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

Condition: New



Part Number: P1013279



Price: $5,238.00


Regular Price: $5,820.00




Currency: US Dollar (USD)

Anest Iwata DVSL-501E Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. PN: DVS-501E
Out of Stock


Anest Iwata DVSL-501E Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. Anest Iwata Part Number: DVS-501E. This Anest Iwata OEM complete pump module for the DVSL-501E dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata DVSL-501E oil-free dry scroll pumps have a pumping speed of 18.4 CFM at 60hz and reach an ultimate vacuum of 7.5x10-1 Torr. The Anest Iwata DVSL-501E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

Condition: New



Part Number: P1013280



Price: $5,238.00


Regular Price: $5,820.00




Currency: US Dollar (USD)

Anest Iwata DVSL-501E-HC Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. PN: DVS-501E-HC
Out of Stock


Anest Iwata DVSL-501E-HC Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. Anest Iwata Part Number: DVS-501E-HC. This Anest Iwata OEM complete pump module for the DVSL-501E-HC dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata DVSL-501E-HC oil-free dry scroll pumps have a pumping speed of 18.4 CFM at 60hz and reach an ultimate vacuum of 7.5x10-1 Torr. The Anest Iwata DVSL-501E-HC is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.

Condition: New



Part Number: P1013281



Price: $6,219.00


Regular Price: $6,910.00




Currency: US Dollar (USD)

Anest Iwata Seal Set for DVSL-100C Dry Scroll Vacuum Pumps. PN: 98890150
In Stock
1


Anest Iwata Seal Set for DVSL-100C Dry Scroll Vacuum Pumps. Anest Iwata Part Number 8890150. These Anest Iwata seal sets are for DVSL-100C scroll vacuum pumps, kits include items needed for a partial service. These Anest Iwata minor repair kits are OEM products

Condition: New



Part Number: P1013316



Price: $771.25




Currency: US Dollar (USD)

Anest Iwata Service Kit Set (1) for DVSL-500C, DVSL-500E, DVSL-501C, and DVSL-501E Series Dry Scroll Vacuum Pumps. PN: 98882951
In Stock
1


Anest Iwata Service Kit Set (1) for DVSL-500C, DVSL-500E, DVSL-501C, and DVSL-501E Series Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98882951. This is a tip seal kit for the Anest Iwata Service Kit Set (1) for DVSL-500C, DVSL-500E, DVSL-501C, and DVSL-501E Series Dry Scroll Vacuum Pumps. These service kits are Anest Iwata OEM parts for DVSL-500C, DVSL-500E, DVSL-501C, and DVSL-501E pumps.

Condition: New



Part Number: P1013320



Price: $932.50




Currency: US Dollar (USD)

Anest Iwata Seal Set (2) for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. PN: 98882930
In Stock
1


Anest Iwata Seal Set (2) for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98882930. This is a tip seal kit for the Anest Iwata Seal Set (2) for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. These tip seal kits are Anest Iwata OEM parts for DVSL-500E, DVSL-500C, DVSL-501E, and DVSL-501C.

Condition: New



Part Number: P1013318



Price: $977.50




Currency: US Dollar (USD)

Anest Iwata Seal Set (1) for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. PN: 98881940
In Stock
1


Anest Iwata Seal Set (1) for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98881940. This is a tip seal kit for the Anest Iwata Seal Set (1) for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. These tip seal kits are Anest Iwata OEM parts for DVSL-500E, DVSL-500C, DVSL-501E, and DVSL-501C.

Condition: New



Part Number: P1013317



Price: $781.16




Currency: US Dollar (USD)

Anest Iwata Grease Kit for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. PN: 98890140
In Stock
1


Anest Iwata Grease Kit for DVSL-500 and DVSL-501 series Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98890140. These are Anest Iwata Grease Kit for Anest Iwata Dry Scroll Vacuum Pumps. These grease kits are Anest Iwata OEM parts for DVSL-500E, DVSL-500C, DVSL-501E, and DVSL-501C.

Condition: New



Part Number: P1013319



Price: $354.72




Currency: US Dollar (USD)

Filter Media HEPA for Foreline Traps KF-16 (P1013392) and KF-25 (P101861)
In Stock
20


Filter Media HEPA for Foreline Traps KF-16 (P1013392) and KF-25 (P101861). This HEPA Media is for KF-16 (P1013392) and KF-25 (P101861) Foreline Traps on this website. This is only one HEPA media filter, the foreline trap is sold separately. Details for this HEPA filter: Reinforced with epoxy coated steel wire on both sides of cloth Maximum oversize required to minimize pressure drop Heavy duty industrial strength glass surrounded by heavy gauge expanded metal Optimal sealing surface & design Filter change out differential: 10"-15" in. H2O above initial delta P Temp (continuous): min -15° F ( -26° C) max 220° F 99.97% removal efficiency standard to 0.3 micron Handles hot air and oil mist from rotary vane vacuum pumps Moisture resistant More durable than paper media Less maintenance Dust loading capacity is increased 40 % - 50% with polyurethane prefilter

Condition: New



Part Number: P103608



Price: $95.00




Currency: US Dollar (USD)

Foreline Trap for Inlet KF16 Rotary Vane Vacuum Pumps up to 18 CFM.
In Stock
14


Foreline Trap for Inlet KF16 Rotary Vane Vacuum Pumps up to 18 CFM. This Foreline Trap NW16, KF-16 serves to prevent contaminants from entering the pump inlet and protects the system from pump fluid or particulate migration. (Backstreaming) This trap extends the life of the pump, cuts maintenance costs and helps prevent system downtime. Made of durable corrosive resistant nickel chrome finish which prevents outgassing. Interchangeable Filter Media is not included with this foreline trap but is available from this website. Filter Media options include, Activated Alumina, Stainless Steel Wire Mesh, Activated Carbon Granulate and Polyester Media. Common Dimensions & Specifications:Use with vacuum pumps KF-16, NW16 Inlets and up to 18 CFM pumping speeds. A= 4"B= 2-3/16"C= 3-3/4"

Condition: New



Part Number: P1013392



Price: $227.00




Currency: US Dollar (USD)

Foreline Trap for Inlet KF25 Rotary Vane Vacuum Pumps up to 18 CFM.
In Stock
87


Foreline Trap for Inlet KF25 Rotary Vane Vacuum Pumps up to 18 CFM. This Foreline Trap NW25 KF25 serves to prevent contaminants from entering the pump inlet and protects the system from pump fluid or particulate migration. (Backstreaming) This trap extends the life of the pump, cuts maintenance costs and helps prevent system downtime. Made of durable corrosive resistant nickel chrome finish which prevents outgassing. Interchangeable Filter Media is not included with this foreline trap but is available from this website. Filter Media options include, Activated Alumina, Stainless Steel Wire Mesh, Activated Carbon Granulate and Polyester Media. Common Dimensions & Specifications:Use with vacuum pumps KF25 NW25 Inlets and up to 18 CFM pumping speeds. A= 4"B= 2-3/16"C= 3-3/4"

Condition: New



Part Number: P101861



Price: $364.55




Currency: US Dollar (USD)

Exhaust Silencer for Dry Scroll Pumps or Rotary Lobe Vacuum Pumps, Up To 9 CFM, KF16
In Stock
4


NEW Exhaust Silencer for Dry Scroll Pumps or Rotary Lobe Vacuum Pumps, Flow Rate up to 9 CFM, KF16 FlangeThese silencers are for use on dry scroll pumps and dry rotary lobe vacuum pumps that are not connected to a house exhaust system. The are designed for clean dry air (CDA) vacuum pumping applications where the exhaust is vented into the room. They greatly silence the exhaust of dry pumps and come with replaceable internal filter media. These media filters provide exhaust filtration to capture tip seal dust that is produced in dry scroll pumps. These exhaust silencers are equipment with an NW-16 (KF-16) vacuum flange and are rated for use up to 9 CFM.

Condition: New



Part Number: P103342



Price: $438.17




Currency: US Dollar (USD)

Replacement Filter Paper for Silencer Kit, Fits Some Dry Scroll and Dry Rotary Lobe Vacuum Pumps
In Stock
19


Filter Paper ELEMENT for Dry Pump Exhaust Silencer Kits, PN P103343, P103342, P102553, A50597000Used on Edwards XDS5, XDS10, Varian Agilent Tri Scroll 300, SH100, SH110, Kashiyama Neo Dry 15C Ebara EV-A03This is a replacement filter paper element for dry pumps with exhaust silencer kits, PN P103343, P103342, P102553, A50597000, This is the filter paper element only. The complete exhaust silincer filter system is separately.

Condition: New



Part Number: P103975



Price: $160.68




Currency: US Dollar (USD)

Exhaust Silencer for Dry Scroll Pumps or Rotary Lobe Vacuum Pumps, Up To 23 CFM, KF25
In Stock
4


Exhaust Silencer for Dry Scroll Pumps or Rotary Lobe Vacuum Pumps, Flow Rate up to 23 CFM, KF25 Flange These silencers are for use on dry scroll pumps and dry rotary lobe vacuum pumps that are not connected to a house exhaust system. Such as Edwards XDS35i, Varian Agilent Tri Scroll 600, Kashiyama Neo Dry 36C and Alcatel ACP 28, ACP 28G, ACP 40, ACP 40G. They are designed for clean dry air (CDA) vacuum pumping applications where the exhaust is vented into the room. They greatly silence the exhaust of dry pumps and come with replaceable internal filter media. These media filters provide exhaust filtration to capture tip seal dust that is produced in dry scroll pumps. These exhaust silencers are equipment with an NW-25 (KF-25) vacuum flange and are rated for use up to 23 CFM. They come with a KF25 vacuum clamp and centering ring for easy installation. Also inside is a paper filter element. A replacement paper filter element is available on this website.

Condition: New



Part Number: P103344



Price: $486.70




Currency: US Dollar (USD)

Filter Paper ELEMENT for Dry Pump Exhaust Silencer Kits, P102938, A50597001, P103344
In Stock
21


Filter Paper ELEMENT for Dry Pump Exhaust Silencer Kits, PN P102938, A50597001, P103344Used on Edwards XDS35i, Varian Agilent Tri Scroll 600, Kashiyama Neo Dry 36c This is a replacement filter paper element for dry pumps with exhaust silencer kits, PN P102938, A50597001, P103344, This is the filter paper element only. Black filter canister sold separately.

Condition: New



Part Number: P103974



Price: $152.62




Currency: US Dollar (USD)

Ideal Vacuum XactGauge Convection-Enhanced Pirani Gauge Kit, XGC-320 Controller, XGC-321 KF-25 Gauge, 10 ft. Sensor Cable, PS, 2 Set Points
In Stock
30


Ideal Vacuum XactGauge Convection-Enhanced Pirani Gauge Kit, XGC-320 Controller, XGC-321 KF-25 Gauge, 10 ft. Sensor Cable, PS, 2 Set Points Complete Kit Includes: XactGauge XGC-320 Convection-Enhanced Controller, XGC-321 KF-25 Sensor Gauge, 3 m (10 ft.) Sensor Cable & Power Supply. Features: Inexpensive solution for Pirani type thermal conductivity gauges Convection-Enhanced Pirani sensor gauges available in 8 different flange sizes Accurate pressure measurements from 1x10-4 to 1000 Torr Compact 1/8-DIN package fits on bench or in instrument panel cutout Bright, easy to read, 4 digit OLED display Intuitive front panel controls for calibration and parameter adjustments Switch between Torr, mBar and Pa units quickly Serial RS232/RS485 DB9 I/O interface for remote control 2 set points 4 analog outputs Compatible with Granville-Phillips® 275 Convectron® and Inficon PGE050 Pirani Gauge Enhanced sensors and cables. The Ideal Vacuum XactGauge XGC-320 Convection Enhanced Pirani Gauge Controller is an inexpensive solution for simple readout of Pirani type thermal conductivity gauges with added features for ease of use and system integration. Use with any of our eight (8) XactGauge Enhanced Pirani Sensor Gauges to obtain accurate pressure measurements ranging from 1x10-4 to 1000 Torr. Our XactGauge XGC-320 Controller, conveniently housed in a compact 1/8-DIN enclosure, can be used on your benchtop or mounted in an instrument panel cutout. The bright, OLED 4 digit display is easy to read. Intuitive front panel controls allow direct gauge calibration and simple adjustment of vacuum measurement parameters. The XactGauge XGC-320 Convection-Enhanced Pirani Gauge Controller is powered by user supplied 12 to 28 VDC, 2 W, or by our XactGauge Enhanced Pirani Controller power supply. The XGC-320 Controller has a serial RS232/RS485 (DB-9) remote I/O interface, two (2) setpoints, and four (4) analog relay outputs, each rated at 1 A at 30 VDC. This XGC-320 Controller is compatible with other manufacturer’s Pirani type gauges and cables, including the Granville-Phillips® 275 Convectron® and the Inficon PGE050 Pirani Gauge Enhanced. Thermal conductivity gauges measure pressure indirectly by sensing the loss of heat from a sensor to the surrounding gas. The higher the pressure of the gas, the more heat is conducted away from the sensor. Pirani thermal conductivity gauges maintain a sensor (usually a wire) at a constant temperature and measure the current or power required to maintain that temperature. A standard Pirani gauge has a useful measuring range of about 10-4 Torr to 10 Torr. Convection-enhanced Pirani gauges take advantage of the convection current inside the sensor to extend the pressure measurement range to just above atmosphere. The XactGauge is supplied factory calibrated using Nitrogen (N2) gas. When measuring gasses other than Nitrogen/Air, accurate correction must be made for the difference in thermal conductivity between nitrogen and the gas in use, particularly at pressures above 1 Torr. DO NOT USE for explosive, corrosive or toxic gasses.

Condition: New



Part Number: P1010252



Price: $1,216.08


Regular Price: $1,430.68




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com