Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Agilent Varian Helium Leak Detectors On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale Edwards nXR Multi Stage Roots Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Edwards nEXT300D TStations On Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detections Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller without Sensor
In Stock: 24
Expecting: 20
Arrival: 20 on 2023-02-27


Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller without Sensor This listing is for an XG-120 thermocouple gauge controller only (no sensor) and includes: XG-120 gauge controller 10 ft. Gauge tube sensor cable (RJ12 to female octal connector) 1.5 A, 5VDC universal power adapter with 6 ft. cord (110-240VAC, 50/60Hz) Hardware kit for rack panel mounting The Ideal Vacuum XactGauge XG-120 Thermocouple (TC) Gauge Controller is a compact, all-in-one solution that provides low-noise, stable and repeatable roughing and foreline vacuum pressure measurements from 1 x 10-3 Torr to 1.999 Torr (1 to 1,999 mTorr). The XG-120 controller is housed in a 1/8 DIN enclosure, which can be either panel mounted or located on a bench top. It has tactile front control buttons and a large 6 digit red LED display for easy reading from across a room or in dimly lit locations. The gauge displays in mTorr, µbar and Pa and includes LED indicators for the two set points. The gauge is equipped with two (Type C) set point relays that can be used to activate valves or to control other external devices. The gauge also has RS232 serial and 5V analog linear outputs for quick integration into a wide variety of systems. The XG-120 uses inexpensive TC sensors which are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. The controller does not require recalibration when thermocouple gauge tubes are replaced. The XG-120 controller is available separately for use with your existing thermocouple gauge tubes and includes a power supply, a 10 ft. gauge tube sensor cable (RJ12 to female octal connector) and panel mounting hardware. Complete systems also include a Teledyne-Hastings DV-6 thermocouple gauge tube with choice of vacuum port (KF-16, KF-25, 1/8” NPT, or 4 VCR). The manual is available here for download.

Condition: New



Product Number: P108447



Price: $593.84



Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with 1/8 NPT TC Gauge Tube
In Stock: 8


Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with 1/8 NPT TC Gauge Tube This listing is for an XG-120 thermocouple gauge controller system and includes: XG-120 gauge controller Teledyne-Hastings DV-6M, 1/8" NPT gauge tube, (1 to 1000 mTorr reading) 10 ft. Gauge tube sensor cable (RJ12 to female octal connector) 1.5 A, 5VDC universal power adapter with 6 ft. cord (110-240VAC, 50/60Hz) Hardware kit for rack panel mounting The Ideal Vacuum XactGauge XG-120 Thermocouple (TC) Gauge Controller is a compact, all-in-one solution that provides low-noise, stable and repeatable roughing and foreline vacuum pressure measurements from 1 x 10-3 Torr to 1.999 Torr (1 to 1,999 mTorr). The XG-120 controller is housed in a 1/8 DIN enclosure, which can be either panel mounted or located on a bench top. It has tactile front control buttons and a large 6 digit red LED display for easy reading from across a room or in dimly lit locations. The gauge displays in mTorr, µbar and Pa and includes LED indicators for the two set points. The gauge is equipped with two (Type C) set point relays that can be used to activate valves or to control other external devices. The gauge also has RS232 serial and 5V analog linear outputs for quick integration into a wide variety of systems. The XG-120 uses inexpensive TC sensors which are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. The controller does not require recalibration when thermocouple gauge tubes are replaced. The XG-120 controller is available separately for use with your existing thermocouple gauge tubes and includes a power supply, a 10 ft. gauge tube sensor cable (RJ12 to female octal connector) and panel mounting hardware. Complete systems also include a Teledyne-Hastings DV-6 thermocouple gauge tube with choice of vacuum port (KF-16, KF-25, 1/8” NPT, or 4 VCR). The manual is available here for download.

Condition: New



Product Number: P108369



Price: $636.16


Regular Price: $848.21



Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with 1/8 NPT TC Ruggedized Gauge Tube
In Stock: 24


Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with 1/8 NPT TC Ruggedized Gauge Tube This listing is for an XG-120 thermocouple gauge controller system (with sensor) and includes: XG-120 gauge controller Teledyne-Hastings DV-6R, 1/8" NPT ruggedized gauge tube, (1 to 1000 mTorr reading) 10 ft. Gauge tube sensor cable (RJ12 to female octal connector) 1.5 A, 5VDC universal power adapter with 6 ft. cord (110-240VAC, 50/60Hz) Hardware kit for rack panel mounting The Ideal Vacuum XactGauge XG-120 Thermocouple (TC) Gauge Controller is a compact, all-in-one solution that provides low-noise, stable and repeatable roughing and foreline vacuum pressure measurements from 1 x 10-3 Torr to 1.999 Torr (1 to 1,999 mTorr). The XG-120 controller is housed in a 1/8 DIN enclosure, which can be either panel mounted or located on a bench top. It has tactile front control buttons and a large 6 digit red LED display for easy reading from across a room or in dimly lit locations. The gauge displays in mTorr, µbar and Pa and includes LED indicators for the two set points. The gauge is equipped with two (Type C) set point relays that can be used to activate valves or to control other external devices. The gauge also has RS232 serial and 5V analog linear outputs for quick integration into a wide variety of systems. The XG-120 uses inexpensive TC sensors which are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. The controller does not require recalibration when thermocouple gauge tubes are replaced. The XG-120 controller is available separately for use with your existing thermocouple gauge tubes and includes a power supply, a 10 ft. gauge tube sensor cable (RJ12 to female octal connector) and panel mounting hardware. Complete systems also include a Teledyne-Hastings DV-6 thermocouple gauge tube with choice of vacuum port (KF-16, KF-25, 1/8” NPT, or 4 VCR). The manual is available here for download.

Condition: New



Product Number: P108443



Price: $649.28


Regular Price: $865.70



Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with KF-16 TC Gauge Tube
In Stock: 1


Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with KF-16 TC Gauge Tube This listing is for an XG-120 thermocouple gauge controller system (with sensor) and includes: XG-120 gauge controller Teledyne-Hastings DV-6M, KF-16 gauge tube, (1 to 1000 mTorr reading) 10 ft. Gauge tube sensor cable (RJ12 to female octal connector) 1.5 A, 5VDC universal power adapter with 6 ft. cord (110-240VAC, 50/60Hz) Hardware kit for rack panel mounting The Ideal Vacuum XactGauge XG-120 Thermocouple (TC) Gauge Controller is a compact, all-in-one solution that provides low-noise, stable and repeatable roughing and foreline vacuum pressure measurements from 10-3 Torr to 1.999 Torr (1 to 1,999 mTorr). The XG-120 controller is housed in a 1/8 DIN enclosure, which can be either panel mounted or located on a bench top. It has tactile front control buttons and a large 6 digit red LED display for easy reading from across a room or in dimly lit locations. The gauge displays in mTorr, µbar and Pa and includes LED indicators for the two set points. The gauge is equipped with two (Type C) set point relays that can be used to activate valves or to control other external devices. The gauge also has RS232 serial and 5V analog linear outputs for quick integration into a wide variety of systems. The XG-120 uses inexpensive TC sensors which are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. The controller does not require recalibration when thermocouple gauge tubes are replaced. The XG-120 controller is available separately for use with your existing thermocouple gauge tubes and includes a power supply, a 10 ft. gauge tube sensor cable (RJ12 to female octal connector) and panel mounting hardware. Complete systems also include a Teledyne-Hastings DV-6 thermocouple gauge tube with choice of vacuum port (KF-16, KF-25, 1/8” NPT, or 4 VCR). The manual is available here for download.

Condition: New



Product Number: P108444



Price: $799.38


Regular Price: $1,065.84



Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with KF-25 TC Gauge Tube
In Stock: 24


Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with KF-25 TC Gauge Tube This listing is for an XG-120 thermocouple gauge controller system (with sensor) and includes: XG-120 gauge controller Teledyne-Hastings DV-6M, KF-25 gauge tube, (1 to 1000 mTorr reading) 10 ft. Gauge tube sensor cable (RJ12 to female octal connector) 1.5 A, 5VDC universal power adapter with 6 ft. cord (110-240VAC, 50/60Hz) Hardware kit for rack panel mounting The Ideal Vacuum XactGauge XG-120 Thermocouple (TC) Gauge Controller is a compact, all-in-one solution that provides low-noise, stable and repeatable roughing and foreline vacuum pressure measurements from 1 x 10-3 Torr to 1.999 Torr (1 to 1,999 mTorr). The XG-120 controller is housed in a 1/8 DIN enclosure, which can be either panel mounted or located on a bench top. It has tactile front control buttons and a large 6 digit red LED display for easy reading from across a room or in dimly lit locations. The gauge displays in mTorr, µbar and Pa and includes LED indicators for the two set points. The gauge is equipped with two (Type C) set point relays that can be used to activate valves or to control other external devices. The gauge also has RS232 serial and 5V analog linear outputs for quick integration into a wide variety of systems. The XG-120 uses inexpensive TC sensors which are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. The controller does not require recalibration when thermocouple gauge tubes are replaced. The XG-120 controller is available separately for use with your existing thermocouple gauge tubes and includes a power supply, a 10 ft. gauge tube sensor cable (RJ12 to female octal connector) and panel mounting hardware. Complete systems also include a Teledyne-Hastings DV-6 thermocouple gauge tube with choice of vacuum port (KF-16, KF-25, 1/8” NPT, or 4 VCR). The manual is available here for download.

Condition: New



Product Number: P108445



Price: $799.38


Regular Price: $1,065.84



Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with 4-VCR TC Gauge Tube
In Stock: 18


Ideal Vacuum XactGauge XG-120 Digital Thermocouple Vacuum Gauge Controller System with 4-VCR TC Gauge Tube This listing is for an XG-120 thermocouple gauge controller system (with sensor) and includes: XG-120 gauge controller Teledyne-Hastings DV-6M, 4-VCR gauge tube, (1 to 1000 mTorr reading) 10 ft. Gauge tube sensor cable (RJ12 to female octal connector) 1.5 A, 5VDC universal power adapter with 6 ft. cord (110-240VAC, 50/60Hz) Hardware kit for rack panel mounting The Ideal Vacuum XactGauge XG-120 Thermocouple (TC) Gauge Controller is a compact, all-in-one solution that provides low-noise, stable and repeatable roughing and foreline vacuum pressure measurements from 1 x 10-3 Torr to 1.999 Torr (1 to 1,999 mTorr). The XG-120 controller is housed in a 1/8 DIN enclosure, which can be either panel mounted or located on a bench top. It has tactile front control buttons and a large 6 digit red LED display for easy reading from across a room or in dimly lit locations. The gauge displays in mTorr, µbar and Pa and includes LED indicators for the two set points. The gauge is equipped with two (Type C) set point relays that can be used to activate valves or to control other external devices. The gauge also has RS232 serial and 5V analog linear outputs for quick integration into a wide variety of systems. The XG-120 uses inexpensive TC sensors which are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. The controller does not require recalibration when thermocouple gauge tubes are replaced. The XG-120 controller is available separately for use with your existing thermocouple gauge tubes and includes a power supply, a 10 ft. gauge tube sensor cable (RJ12 to female octal connector) and panel mounting hardware. Complete systems also include a Teledyne-Hastings DV-6 thermocouple gauge tube with choice of vacuum port (KF-16, KF-25, 1/8” NPT, or 4 VCR). The manual is available here for download.

Condition: New



Product Number: P108446



Price: $735.74


Regular Price: $980.99



Teledyne-Hastings DV-6M 1/8" NPT, Thermocouple Vacuum Gauge Tube, 0.001 to 1 Torr Range
In Stock: 8
Expecting: 36
Arrival: 36 on 2023-02-27


Teledyne-Hastings DV-6M 1/8 Male NPT, Thermocouple Vacuum Gauge Tube, 0.001 to 1 Torr Range This Teledyne-Hastings DV-6M 1/8 NPT thermocouple (TC) vacuum gauge tube measures pressure between 0.001 and 1 Torr (1 to 1000 mTorr) and calibrated for clean, dry air or nitrogen. DV-6 series gauge tubes are used with TC gauge controllers such as the Ideal Vacuum digital XG-120 and Teledyne-Hastings VT and DCVT units (not included). These inexpensive sensors are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. Teledyne-Hasting DV-6 tubes are matched and gauge controller recalibration is not required when gauge tubes are replaced. Teledyne-Hastings DV-6 gauge tubes use a rugged, but sensitive noble metal thermocouple and corrosion resistant stainless steel and nickel plated components. They are temperature and temperature change-rate compensated, making them well suited for ambient installations. Standard DV-6 gauge tubes are rated for a maximum temperature of 100° C. Ruggedized gauge tubes are rated for 150° C. Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. The Teledyne Hastings Instruments DV-6 thermocouple gauges have a reputation built upon exceptional stability, accuracy, and reliability under the most demanding conditions. DV-6 thermocouple gauge tube sensors are used in a wide variety of applications such as glove boxes, cryogenics, vacuum furnaces, pharmaceutical production, freeze drying, agricultural processes, air conditioning, thermal food containers, plasma coating, refrigeration (HVAC), accelerators, appliance manufacturing and many others. DV-6 series gauge tubes are available with several vacuum port configurations: DV-6M, Standard Tube with 1/8 inch Male NPT DV-6R, Ruggedized Tube with 1/8 inch NPT DV-6M-KF-16, Standard Tube with ISO KF-16 DV-6M-KF-25, Standard Tube with ISO KF-25 DV-6M-4-VCR, Standard Tube with Female Ľ inch VCR DV-6R-CF, Ruggedized Tube with 1-1/3 inch Mini Conflat

Condition: New



Product Number: P102046



Price: $113.28


Regular Price: $151.04



Teledyne-Hastings DV-6R 1/8" NPT Ruggedized Thermocouple Vacuum Gauge Tube, 0.001 to 1 Torr Range
In Stock: 81


Teledyne-Hastings DV-6R 1/8 NPT Ruggedized Thermocouple Vacuum Gauge Tube, 0.001 to 1 Torr Range This Teledyne-Hastings DV-6M 1/8 NPT thermocouple (TC) vacuum gauge tube measures pressure between 0.001 and 1 Torr (1 to 1000 mTorr) and calibrated for clean, dry air or nitrogen. DV-6 series gauge tubes are used with TC gauge controllers such as the Ideal Vacuum digital XG-120 and Teledyne-Hastings VT and DCVT units (not included). These inexpensive sensors are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. Teledyne-Hasting DV-6 tubes are matched and gauge controller recalibration is not required when gauge tubes are replaced. Teledyne-Hastings DV-6 gauge tubes use a rugged, but sensitive noble metal thermocouple and corrosion resistant stainless steel and nickel plated components. They are temperature and temperature change-rate compensated, making them well suited for ambient installations. Standard DV-6 gauge tubes are rated for a maximum temperature of 100° C. Ruggedized gauge tubes are rated for 150° C. Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. The Teledyne Hastings Instruments DV-6 thermocouple gauges have a reputation built upon exceptional stability, accuracy, and reliability under the most demanding conditions. DV-6 thermocouple gauge tube sensors are used in a wide variety of applications such as glove boxes, cryogenics, vacuum furnaces, pharmaceutical production, freeze drying, agricultural processes, air conditioning, thermal food containers, plasma coating, refrigeration (HVAC), accelerators, appliance manufacturing and many others. DV-6 series gauge tubes are available with several vacuum port configurations: DV-6M, Standard Tube with 1/8 inch Male NPT DV-6R, Ruggedized Tube with 1/8 inch NPT DV-6M-KF-16, Standard Tube with ISO KF-16 DV-6M-KF-25, Standard Tube with ISO KF-25 DV-6M-4-VCR, Standard Tube with Female Ľ inch VCR DV-6R-CF, Ruggedized Tube with 1-1/3 inch Mini Conflat

Condition: New



Product Number: P102045



Price: $121.05


Regular Price: $161.40



Teledyne-Hastings DV-6M-KF-16 Thermocouple Vacuum Gauge Tube, KF16 Fitting, 0.001 to 1 Torr Range
In Stock: 1
Expecting: 8
Arrival: 8 on 2023-02-27


Teledyne-Hastings DV-6M-KF-16 Thermocouple Vacuum Gauge Tube, KF16 (NW16) Fitting, 0.001 to 1 Torr Range This Teledyne-Hastings DV-6M 1/8 NPT thermocouple (TC) vacuum gauge tube measures pressure between 0.001 and 1 Torr (1 to 1000 mTorr) and calibrated for clean, dry air or nitrogen. DV-6 series gauge tubes are used with TC gauge controllers such as the Ideal Vacuum digital XG-120 and Teledyne-Hastings VT and DCVT units (not included). These inexpensive sensors are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. Teledyne-Hasting DV-6 tubes are matched and gauge controller recalibration is not required when gauge tubes are replaced. Teledyne-Hastings DV-6 gauge tubes use a rugged, but sensitive noble metal thermocouple and corrosion resistant stainless steel and nickel plated components. They are temperature and temperature change-rate compensated, making them well suited for ambient installations. Standard DV-6 gauge tubes are rated for a maximum temperature of 100° C. Ruggedized gauge tubes are rated for 150° C. Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. The Teledyne Hastings Instruments DV-6 thermocouple gauges have a reputation built upon exceptional stability, accuracy, and reliability under the most demanding conditions. DV-6 thermocouple gauge tube sensors are used in a wide variety of applications such as glove boxes, cryogenics, vacuum furnaces, pharmaceutical production, freeze drying, agricultural processes, air conditioning, thermal food containers, plasma coating, refrigeration (HVAC), accelerators, appliance manufacturing and many others. DV-6 series gauge tubes are available with several vacuum port configurations: DV-6M, Standard Tube with 1/8 inch Male NPT DV-6R, Ruggedized Tube with 1/8 inch NPT DV-6M-KF-16, Standard Tube with ISO KF-16 DV-6M-KF-25, Standard Tube with ISO KF-25 DV-6M-4-VCR, Standard Tube with Female Ľ inch VCR DV-6R-CF, Ruggedized Tube with 1-1/3 inch Mini Conflat

Condition: New



Product Number: P102616



Price: $261.88


Regular Price: $349.17



Teledyne-Hastings DV-6M-KF-25 Thermocouple Vacuum Gauge Tube, KF25 Fitting, 0.001 to 1 Torr Range
In Stock: 63


Teledyne-Hastings DV-6M-KF-25 Thermocouple Vacuum Gauge Tube, KF25 (NW25) Fitting, 0.001 to 1 Torr Range This Teledyne-Hastings DV-6M 1/8 NPT thermocouple (TC) vacuum gauge tube measures pressure between 0.001 and 1 Torr (1 to 1000 mTorr) and calibrated for clean, dry air or nitrogen. DV-6 series gauge tubes are used with TC gauge controllers such as the Ideal Vacuum digital XG-120 and Teledyne-Hastings VT and DCVT units (not included). These inexpensive sensors are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. Teledyne-Hasting DV-6 tubes are matched and gauge controller recalibration is not required when gauge tubes are replaced. Teledyne-Hastings DV-6 gauge tubes use a rugged, but sensitive noble metal thermocouple and corrosion resistant stainless steel and nickel plated components. They are temperature and temperature change-rate compensated, making them well suited for ambient installations. Standard DV-6 gauge tubes are rated for a maximum temperature of 100° C. Ruggedized gauge tubes are rated for 150° C. Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. The Teledyne Hastings Instruments DV-6 thermocouple gauges have a reputation built upon exceptional stability, accuracy, and reliability under the most demanding conditions. DV-6 thermocouple gauge tube sensors are used in a wide variety of applications such as glove boxes, cryogenics, vacuum furnaces, pharmaceutical production, freeze drying, agricultural processes, air conditioning, thermal food containers, plasma coating, refrigeration (HVAC), accelerators, appliance manufacturing and many others. DV-6 series gauge tubes are available with several vacuum port configurations: DV-6M, Standard Tube with 1/8 inch Male NPT DV-6R, Ruggedized Tube with 1/8 inch NPT DV-6M-KF-16, Standard Tube with ISO KF-16 DV-6M-KF-25, Standard Tube with ISO KF-25 DV-6M-4-VCR, Standard Tube with Female Ľ inch VCR DV-6R-CF, Ruggedized Tube with 1-1/3 inch Mini Conflat

Condition: New



Product Number: P102617



Price: $261.88


Regular Price: $349.17



Teledyne-Hastings DV-6M-VCR Thermocouple Vacuum Gauge Tube, 4-VCR Fitting, 0.001 to 1 Torr Range
In Stock: 18


Teledyne-Hastings DV-6M-4-VCR Thermocouple Vacuum Gauge Tube, 4-VCR Fitting, 0.001 to 1 Torr Range This Teledyne-Hastings DV-6M 1/8 NPT thermocouple (TC) vacuum gauge tube measures pressure between 0.001 and 1 Torr (1 to 1000 mTorr) and calibrated for clean, dry air or nitrogen. DV-6 series gauge tubes are used with TC gauge controllers such as the Ideal Vacuum digital XG-120 and Teledyne-Hastings VT and DCVT units (not included). These inexpensive sensors are used as ‘rough’ indicators to monitor mechanical pump vacuum levels and to signal when crossover (to high-vacuum) pressure has been reached. Teledyne-Hasting DV-6 tubes are matched and gauge controller recalibration is not required when gauge tubes are replaced. Teledyne-Hastings DV-6 gauge tubes use a rugged, but sensitive noble metal thermocouple and corrosion resistant stainless steel and nickel plated components. They are temperature and temperature change-rate compensated, making them well suited for ambient installations. Standard DV-6 gauge tubes are rated for a maximum temperature of 100° C. Ruggedized gauge tubes are rated for 150° C. Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. The Teledyne Hastings Instruments DV-6 thermocouple gauges have a reputation built upon exceptional stability, accuracy, and reliability under the most demanding conditions. DV-6 thermocouple gauge tube sensors are used in a wide variety of applications such as glove boxes, cryogenics, vacuum furnaces, pharmaceutical production, freeze drying, agricultural processes, air conditioning, thermal food containers, plasma coating, refrigeration (HVAC), accelerators, appliance manufacturing and many others. DV-6 series gauge tubes are available with several vacuum port configurations: DV-6M, Standard Tube with 1/8 inch Male NPT DV-6R, Ruggedized Tube with 1/8 inch NPT DV-6M-KF-16, Standard Tube with ISO KF-16 DV-6M-KF-25, Standard Tube with ISO KF-25 DV-6M-4-VCR, Standard Tube with Female Ľ inch VCR DV-6R-CF, Ruggedized Tube with 1-1/3 inch Mini Conflat DV-6 series gauge tubes are available with several vacuum port configurations: DV-6M, Standard Tube with 1/8 inch Male NPT DV-6R, Ruggedized Tube with 1/8 inch NPT DV-6M-KF-16, Standard Tube with ISO KF-16 DV-6M-KF-25, Standard Tube with ISO KF-25 DV-6M-4-VCR, Standard Tube with Female Ľ inch VCR DV-6R-CF, Ruggedized Tube with 1-1/3 inch Mini Conflat

Condition: New



Product Number: P102618



Price: $198.24


Regular Price: $264.32



Serial to USB Cable Connectivity Kit for IVP XG-120 and Other Controllers, Connects Serial RS232 to Computer
In Stock: 3


Serial to USB Cable Connectivity Kit for IVP XG-120 and Other Controllers, Connects Serial RS232 to ComputerThis cable connectivity kit is needed for transferring data from an Ideal Vacuum XG-120 digital thermocouple gauge controller or any other controller with a serial output to a remote PLC or computer via RS232 serial communication, when the computer does not have a serial port. Most modern machines do not have a built in serial port, but do have a USB port. This kit consists of a 6 ft. Serial-to-USB cable and null modem adapter (controller sold separately). The cable’s DB9 male connector attaches through the null modem adapter onto the back of the controller, which has a DB9 female connector. The USB 2.0 type A connector plugs in to the computer’s USB port. Some controllers may have a DB25 serial interface in which case a DB25-to-DB9 adapter would be required. Controllers with serial interfaces include: IVP XG-120 Thermocouple Gauge Controller P108447, P108370 Agilent Varian RGC-150 Rough Thermocouple Gauge Controller, P105092 Agilent XGS-600 Vacuum Gauge Controller, P104122 Edwards Active Digital Pressure Controller, P107267 Edwards TIC Instrument Controller, P107177 Our serial-to-USB cable uses the FTDI chipset for ultimate compatibility with virtually all recent Windows, Mac and Linux platforms. Windows has built in drivers for the FTDI chipset. A variety of free, readily available, RS232 terminal software is available for online download, including PuTTY and TERMITE, which allows you to remotely monitor the output of vacuum pressure readings. Instructions for connecting and monitoring the XG-120 via RS232 serial communication are located here in the PDF downloads.

Condition: New



Product Number: P1010935



Price: $18.38


Regular Price: $24.50



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com