Leybold TriVac D4T TriVac Dual Stage Rotary Vane Vacuum Pump Single Phase 100/230 VAC 3.1 CFM. Leybold Part Number: 31236TE25. This Leybold TriVac D4T is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a single phase, 100/230 VAC, 50/60Hz motor which draws 660W. At 60 Hz it has a pumping speed of 3.1 cfm (5.3 m3/hr) and an ultimate pressure of 3.7 x 10-3 Torr (5 x 10-3 mbar). Inlet and outlet ports are KF-16. This pump has a noise level of 58 dB(A). The D4T pump requires 0.6 - 0.9 liters of LVO 100 oil (included). This D4T single phase pump is supplied ready to operate with switch, built-in thermal motor protection switch, mains cable (approx. 1.5 m) and mains plug. Included with the D4T pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 16 KF 1L Bottle of LVO 100 oil Operating Instructions (manual) Spare Parts List The TriVac T series of pumps are suited for pumping water vapor within the specified water vapor tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D4T pump, Leybold part number 31236TE25.

Leybold TriVac D4T TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 200/480 VAC 3.1 CFM. Leybold Part Number: 31231TE25. This Leybold TriVac D4T is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 200/480 VAC, 50/60Hz motor which draws 440W. At 60 Hz it has a pumping speed of 3.1 cfm (5.3 m3/hr) and an ultimate pressure of 3.7 x 10-3 Torr (5 x 10-3 mbar). Inlet and outlet ports are KF-16. This pump has a noise level of 58 dB(A). The D4T pump requires 0.6 - 0.9 liters of LVO 100 oil (included). This D4T three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. Included with the D4T pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 16 KF 1L Bottle of LVO 100 oil Operating Instructions (manual) Spare Parts List The TriVac T series of pumps are suited for pumping water vapor within the specified water vapor tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D4T pump, Leybold part number 31231TE25.

Leybold TriVac D8T TriVac Dual Stage Rotary Vane Vacuum Pump Single Phase 100/230 VAC, 6.0 CFM, KF-25 Inlet/Outlet. Leybold Part Number: 31246TE25. This Leybold TriVac D8T is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a single phase, 100/230 VAC, 50/60Hz motor which draws 660W. At 60 Hz it has a pumping speed of 6.0 cfm (10.2 m3/hr) and an ultimate pressure of 3.8 x 10-3 Torr (5 x 10-3 mbar). Inlet and outlet ports are KF-25. This pump has a noise level of 58 dB(A). The D8T pump requires 0.7 - 1.0 liters of LVO 100 oil (included). This D8T single phase pump is supplied ready to operate with switch, built-in thermal motor protection switch, mains cable (approx. 1.5 m) and mains plug. Included with the D8T pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 25 KF 1L Bottle of LVO 100 oil Operating Instructions (manual) Spare Parts List The TriVac T series of pumps are suited for pumping water vapor within the specified water vapor tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D8T pump, Leybold part number 31246TE25, KF-25 inlet/outlet. (Note: for KF-16 inlet/outlet the part number should be: 31246TE)

Leybold TriVac D8T TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 200/480 VAC 5.1 CFM, KF-25 Inlet/Outlet. Leybold Part Number: 31241TE25. This Leybold TriVac D8T is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 200/480 VAC, 50/60Hz motor which draws 440W. At 60 Hz it has a pumping speed of 5.1 cfm (8.7 m3/hr) and an ultimate pressure of 3.7 x 10-3 Torr (5 x 10-3 mbar). Inlet and outlet ports are KF-25. This pump has a noise level of 58 dB(A). The D8T pump requires 0.7 - 1.0 liters of LVO 100 oil (included). This D8T three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. . Included with the D8T pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 25 KF 1L Bottle of LVO 100 oil Operating Instructions (manual) Spare Parts List The TriVac T series of pumps are suited for pumping water vapor within the specified water vapor tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D8T pump, Leybold part number 31241TE25, KF-25 inlet/outlet. (Note: for KF-16 Inlet/Outlet the part number should be: 31241TE)

Leybold TriVac D16T TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 200/480 VAC 10.0 CFM. Leybold Part Number: 31251TE. This Leybold TriVac D16T is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 200/480 VAC, 50/60Hz motor which draws 750W. At 60 Hz it has a pumping speed of 10.0 cfm (17.0 m3/hr) and an ultimate pressure of 3.7 x 10-3 Torr (5 x 10-3 mbar). Inlet and outlet ports are KF-25. This pump has a noise level of 60 dB(A). The D16T pump requires 1.0 - 1.6 liters of LVO 100 oil (included). This D16T three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. . Included with the D16T pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 25 KF 2-1L Bottles of LVO 100 oil Operating Instructions (manual) Spare Parts List The TriVac T series of pumps are suited for pumping water vapor within the specified water vapor tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D16T pump, Leybold part number 31251TE.

Leybold TriVac D30T TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 200/480 VAC 16.8 CFM. Leybold Part Number: 31261TE. This Leybold TriVac D30T is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 200/480 VAC, 50/60Hz motor which draws 750W. At 60 Hz it has a pumping speed of 16.8 cfm (28.5 m3/hr) and an ultimate pressure of 3.7 x 10-3 Torr (5 x 10-3 mbar). Inlet and outlet ports are KF-25. This pump has a noise level of 60 dB(A). The D30T pump requires 1.1 - 1.8 liters of LVO 100 oil (included). This D30T three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. . Included with the D30T pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 25 KF 2-1L Bottles of LVO 100 oil Operating Instructions (manual) Spare Parts List The TriVac T series of pumps are suited for pumping water vapor within the specified water vapor tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D30T pump, Leybold part number 31261TE.

Leybold TriVac D40L TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 230/460 VAC 34.7 CFM. Leybold Part Number: 1019040V01. This Leybold TriVac D40L is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 230/460 VAC, 50/60Hz motor which draws 1.3kW. At 60 Hz it has a pumping speed of 29.4 cfm (50 m3/hr) and an ultimate pressure of 2.2 x 10-3 Torr (3 x 10-3 mbar). Inlet and outlet ports are KF-40. This pump has a noise level of 60 dB(A). The D40L pump requires 3.1 - 4.1 liters of LVO 130 oil (not included, see part number P108582). This D40L three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. Included with the D40L pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 40 KF Operating Instructions (manual) or QR sheet to download it Spare Parts List The TriVac L series of pumps are suited for pumping water vapor within the specified water vapour tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D40L pump, Leybold part number 1019040V01.

Leybold TriVac D63L TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 230/460 VAC 47.0 CFM. Leybold Part Number: 1019063V01. This Leybold TriVac D63L is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 230/460 VAC, 50/60Hz motor which draws 1.8kW. At 60 Hz it has a pumping speed of 42.3 cfm (72 m3/hr) and an ultimate pressure of 2.2 x 10-3 Torr (3 x 10-3 mbar). Inlet and outlet ports are KF-40. This pump has a noise level of 60 dB(A). The D63L pump requires 3.3 - 4.4 liters of LVO 130 oil (not included, see part number P108582). This D63L three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. . Included with the D63L pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 40 KF Operating Instructions (manual) or QR sheet to download it Spare Parts List The TriVac L series of pumps are suited for pumping water vapor within the specified water vapour tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D63L pump, Leybold part number 1019063V01.

Leybold TriVac D90L TriVac Dual Stage Rotary Vane Vacuum Pump Three Phase 230/460 VAC 64.7 CFM. Leybold Part Number: 1019090V01. This Leybold TriVac D90L is a dual-stage rotary vane vacuum pump with integrated anti-suckback valve and gas ballast. This pump is fitted with a three phase, 230/460 VAC, 50/60Hz motor which draws 2.6kW. At 60 Hz it has a pumping speed of 55.9 cfm (95 m3/hr) and an ultimate pressure of 2.2 x 10-3 Torr (3 x 10-3 mbar). Inlet and outlet ports are KF-40. This pump has a noise level of 60 dB(A). The D90L pump requires 3.6 - 4.8 liters of LVO 130 oil (not included, see part number P108582). This D90L three phase pump is not supplied with accessories for electrical connection. It must be connected via the appropriate cable, and a suitable motor protection switch. . Included with the D90L pump are: 1 centering ring 1 centering ring with dirt trap 2 clamping rings DN 40 KF Operating Instructions (manual) or QR sheet to download it Spare Parts List The TriVac L series of pumps are suited for pumping water vapor within the specified water vapour tolerance limits. Condensable vapors that can liquify when being compressed inside the pump and exceed the vapor tolerance of the pump should be avoided. In the case of wet processes we recommend the installation of liquid separators upstream and downstream of the pump as well as the use of the gas ballast. Trivac T pumps are not designed for pumping dusty, aggressive, corrosive, flammable or explosive gases or gas mixtures, or for pumping oxygen or other highly reactive gases in concentrations greater than in normal ambient atmosphere (>21%). Applications Include: Backing high-vacuum pumps (turbo, diffusion, cryo...) Backing roots pumps Backing mass spectrometers Refrigeration system evacuation Epoxy degassing Vacuum sterilization Freeze drying Vacuum centrifugal applications Vacuum distillation Space research Other vacuum processes We carry repair kits for most of the pumps we sell, have welded and modular chambers of all sizes, and have all the fittings, hoses, valves, gauges, and other accessories needed to build your custom vacuum solution. Please see the operating instruction manual located in the downloads for more information about this Trivac D90L pump, Leybold part number 1019090V01.