Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Leybold VaroDry Series Pumps Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Agilent Varian Helium Leak Detectors On Sale Leybold T Series Rotary Vane Pumps Agilent DS Series Rotary Vane Pumps On Sale Agilent IDP-10 Dry Scroll Vacuum Pumps On Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers Vacuum Chamber Systems Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Gauges And Controllers Pressure Measurement Chillers
×

Load

Edwards QDP40 iQDP40 Semiconductor Vacuum Pump Motor Water Cooled, 2.2 kW D9OI C, A07113770
In Stock: 1


This is a motor for the Drypumping System microprocessor controlled, modular, dry pump package that provides unparalleled control and monitoring facilities. i/QDP pumps have enclosed, water-cooled motors and are therefore suitable for applications in clean environments where fan cooling is unacceptable.The pump-motor is cooled by water flowing through a cooling jacket which surrounds the motor. The pump-motor cooling circuit is separate from the pump cooling circuit. The cooling-water supply and return pipelines are connected to the pump by connectors on the water services panel at one end of the pump. The iQ dry pumping system has integrated sensors, which continuously monitor key system performance parameters and give advanced warning of problems including pump and motor temperature, by way of integrated sensors. Three motor-protection thermistors are fitted to the pump-motor (one on each winding). These thermistors are solid-state devices which have an electrical resistance of 100 to 500 Ohms at normal pump-motor operational temperature. When the pump-motor is too hot, the electrical resistance rises quickly to 3000 Ohms. The thermistors are connected in series and you can use the output of the thermistors to shut down the pump because the motor is too hot. These motors are supplied configured for ‘low voltage’ operation (200-208 V at 50 Hz or 200-230 V at 60 Hz). To change the QDP80 Pump-motor to ‘high voltage’ operation, remove the pump-motor terminal-box cover, then remove the wires from the U1, V1 and W1 terminals. Reconnect the wires to the W2, U2 and V2 terminals, as per p.22 of the Edwards DRYSTAR QDP-40 IQDP-40 Operating Instructions (see downloads, at left).

Condition: New



Product Number: P108789



Price: $2,093.13



Edwards QDP80 iQDP80 Semiconductor Vacuum Pump Motor Water Cooled, 6 kW D9OI C, A07115770
In Stock: 1


This is a motor for the Drypumping System microprocessor controlled, modular, dry pump package that provides unparalleled control and monitoring facilities. i/QDP pumps have enclosed, water-cooled motors and are therefore suitable for applications in clean environments where fan cooling is unacceptable.The pump-motor is cooled by water flowing through a cooling jacket which surrounds the motor. The pump-motor cooling circuit is separate from the pump cooling circuit. The cooling-water supply and return pipelines are connected to the pump by connectors on the water services panel at one end of the pump. The iQ dry pumping system has integrated sensors, which continuously monitor key system performance parameters and give advanced warning of problems including pump and motor temperature, by way of integrated sensors. Three motor-protection thermistors are fitted to the pump-motor (one on each winding). These thermistors are solid-state devices which have an electrical resistance of 100 to 500 Ohms at normal pump-motor operational temperature. When the pump-motor is too hot, the electrical resistance rises quickly to 3000 Ohms. The thermistors are connected in series and you can use the output of the thermistors to shut down the pump because the motor is too hot. These motors are supplied configured for ‘low voltage’ operation (200-208 V at 50 Hz or 200-230 V at 60 Hz). To change the i/QDP80 Pump-motor to ‘high voltage’ operation, remove the pump-motor terminal-box cover, then remove the wires from the U1, V1 and W1 terminals.

Condition: New



Product Number: P109569



Price: $2,221.08



BOC Edwards QDP40 Dry Semiconductor DryStar Vacuum Pump Rebuilt
Out of Stock
Arrival: 1 on 2021-09-28


This Edwards QDP-40 Dry Vacuum Pump is a four-stage, positive displacement rotary pump. These "Dry Pumps" are ideal for the corrosive enviroment of semiconductor processing. The applications range from light duty loadlock and sputtering to demanding processes including plasma etch, LPCVD, PECVD, and MOCVD. Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.

Condition: Rebuilt



Product Number: P101398



Price: $8,995.00



BOC Edwards QDP80 Dry Semiconductor DryStar Vacuum Pump, Advanced Exchange Pump Module
Out of Stock
Arrival: 4 on 2021-09-28


The Edwards QDP-80 Dry Vacuum goes through a rigorous rebuild process, cleaning and monitored for 72-hours under varying load, after our safety test, final pumps are ready for the Ideal Vacuum Advanced Exchange Service. These Edwards QDP-80 Dry Vacuum Pump are four-stage, positive displacement rotary pump. These "Dry Pumps" are ideal for the corrosive environment of semiconductor processing. The applications range from light duty load lock and sputtering to demanding processes including plasma etch, LPCVD, PECVD, and MOCVD. Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.

Condition: Rebuilt



Product Number: P106787



Price: $7,995.00



BOC Edwards QDP80 Dry Semiconductor DryStar Vacuum Pump Rebuilt
Out of Stock
Arrival: 4 on 2021-09-28


This Edwards QDP-80 Dry Vacuum Pump is a four-stage, positive displacement rotary pump. These "Dry Pumps" are ideal for the corrosive enviroment of semiconductor processing. The applications range from light duty loadlock and sputtering to demanding processes including plasma etch, LPCVD, PECVD, and MOCVD. Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.

Condition: Rebuilt



Product Number: P101399



Price: $9,995.00



BOC Edwards QDP40 Dry Semiconductor DryStar Vacuum Pump with QMB-250 Booster Rebuilt
Out of Stock
Arrival: 1 on 2021-09-28


These BOC Edwards QDP40 Dry Vacuum Pump QMB-250 Dry Booster Blower System "Dry Pumps" are ideal for the corrosive enviroment of semiconductor processing. The applications range from light duty loadlock and sputtering to demanding processes including plasma etch, LPCVD, PECVD, and MOCVD. Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.

Condition: Rebuilt



Product Number: P101400



Price: $11,495.00



BOC Edwards QDP80 Dry Semiconductor DryStar Vacuum Pump with QMB-500 Booster Rebuilt
Out of Stock


These BOC Edwards QDP80 Dry Vacuum Pump QMB-500 Dry Booster Blower System "Dry Pumps" are ideal for the corrosive enviroment of semiconductor processing. The applications range from light duty loadlock and sputtering to demanding processes including plasma etch, LPCVD, PECVD, and MOCVD. Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.

Condition: Rebuilt



Product Number: P101401



Price: $13,750.00



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com