These Oerlikon Leybold Turbovac 90i dry turbo vacuum pump package deals include the Leybold turbo pump with 4.5 inch CF inlet flange, Leybold ScrollVac 7 dry scroll pump, Turbo.Power Integra Power Supply, Axial Air Cooling Unit, and CF 4.5 in. Splinter Screen. These package deals do not include the interconnecting vacuum fittings that connect the turbo to the scroll pump; these are sold separately (P105464). Also does not include the turbo pump water-cooling kit
This new generation i-Series TURBOVAC features a cutting edge rotor and drag stage design, leading to high performance and unparalleled speed especially for light gases. A wide selection of interface options, housing and flange configurations as well as accessories completes this product line.The i-Series pumps are among the quietest turbo pumps on the market today and have an ultimate pressure as low as 5x10-10
Torr when backed with oil sealed rotary vane pump.
These turbo pumps can be cooled by water, air, or ambient cooling. Ambient cooling is only allowed for very low gas throughput, with low backing pressures (example 5 mTorr), and operated in a cool environment. We recommend at least air cooling for most applications.
These i-series turbo pumps can be backed with foreline pressures as high as 15 Torr (20 mBar), water cooling is required for higher foreline pressure operation as the pump will produce extra heat.
The Leybold ScrollVac 7 Plus features exceptional pumping capability, ultimate vacuum performance and the best performance in its class. Its intelligent control functions and up to five year service interval offer low cost of ownership, making it the small dry pump of choice for today’s most advanced technologies. The Leybold ScrollVac 7 Plus is also up to 20 times quieter than other pumps. NOW with a universal voltage power supply (100-127VAC - 200-240VAC) for performance anywhere in the world. This is the 1 phase motor ScrollVac 7 Plus version with 3.6 CFM.
The Leybold ScrollVac 7 Plus pumps are truly dry vacuum pumps as all the bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The Leybold ScrollVac 7 Plus is the next generation in completely oil free, dry scroll pumps. No shaft seal to wear allowing much longer intervals between servicing. It offers increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. ScrollVac 7 Plus pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimized pumping performance globally. ScrollVac 7 Plus pumps are designed to be completely field serviceable.
- General clean pumping applications
- Scanning Electron Microscopes - SEM
- Beam lines and high energy physics
- Mass Spectrometry
- Electron Microscopy
- Sample Preparation
- Research and Development
- High Energy Physics
- Backing turbo pumps
- Centrifuges, ultra-high speed
- Degassing/curing - oil, epoxy resin
- Laboratory bench top vacuum
- Lasers, gas recovery and recirculation
- Research and development
- Surface science instruments
Now with an integral pump controller managing the supply of current to a three-phase electric motor in accordance with
operating conditions. The controller monitors power and temperature, and will protect the pump in the event of
operation under sustained high load or under fault conditions.
The controller provides the user interface. The pump may be operated in Manual mode, using the buttons on the interface panel, with a unique feature to control the speed of the pump in Standby Mode to 70% of full speed or with other buttons to increase or decrease pump speed to save wear and tear on tip seals and bearing service life; or a Remote Mode, via serial communications; or a digital and analogue process control (parallel) mode, via the 15-way D-type logic interface connector.