Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Leybold VaroDry Series Pumps Edwards iXH Dry Semiconductor Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Edwards nEXT85H TStations On Sale Leybold BCS Series Pumps On Sale Ideal Vacuum Modular Vacuum Chambers On Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers Vacuum Chamber Systems Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Gauges And Controllers Pressure Measurement Chillers
Product Image 1
Product Image 2
Product Image 3

Condition:
  New
Part Number:
  P107940
Warranty:
  Full Manufacturer's Warranty

Available Now: 1   Ideal Vacuum Degas Chamber Kit RV3 Rotary Vane Pump, Butterfly, Air Valve, GP 475 Gauge, 275 Sensor 5280.04


Sale: $5,280.04


Print Version

Ideal Vacuum Degas Chamber Kit RV3 Rotary Vane Pump, Butterfly, Air Valve, GP 475 Gauge, 275 Sensor


Ideal Vacuum Degas Chamber with Edwards RV Rotary Vane Pump and all Vacuum Connection Hardware
With Butterfly Valve, Air Admittance Valve and GP 475 Gauge Controller and 275 KF25 Convectron Sensor

These degassing vacuum chambers are made of corrosive resistant 304 stainless steel. Designed with internal TIG welds, being leak tight and suitable for many applications including research and development. A degassing chamber is used for liquid mixtures and removes the air bubbles which become entrapped in the mixture when mixing the components. Degassing purifies the solution. (a review of how to vacuum degas a solution for parts casting is found below). This chamber includes 3 KF25 flanged vacuum rated evacuation ports with hardware, a O-ring seal hinge door and Edwards RV3 Rotary Vane Vacuum Pump with butterfly valve, air admittance valve and 475 pressure controller gauge with 275 KF25 convectron sensor. This chamber can reach vacuum pressures down to 10-3 Torr (1mTorr). Many other custom sizes and varieties of vacuum chambers with vacuum pumps, pressure gauges, and connections are offered by Ideal Vacuum, please call us at 505-872-0037 for more information.

Background On Vacuum Degassing Chambers For Parts Casting
Degassing vacuum chambers are often used in the process of casting parts made of epoxy or polyurethane type materials (for example plastic type resins such as Smooth Cast). During the manufacturing process, two halves of a silicone rubber model are often made around the part that is to be reproduced. Once the silicone rubber model is set up the part being copied is removed from the model and the resin is poured into the model to cast the new replicated part.

Vacuum degassing is often used during the process of making the silicone rubber mold. In this process silicone rubber is mixed with a catalyst material. The thick viscosity of the liquid silicone rubber causes air to be mixed into it while the catalyst is being added. In many cases, the catalyst is a lower viscosity material that will tend to sit on top until stirred in completely. After mixing is complete the liquid silicone rubber is often absolutely filled with trapped air bubbles.

The next step is to put the pot of silicone rubber into the vacuum degassing chamber to remove air bubbles before it is poured over the part to make the mold. Instantly as the vacuum pressure starts to fall the pot of silicone starts to rise and foam as it is evacuated in the degas chamber. The trapped air bubbles are expand taking up a much greater volume in the silicone rubber as the pressure continues to decrease. The silicone pot will continue to expand until the point called self-collapse were the bubbles all seem to rapidly burst allowing the trapped air to escape and the degassed liquid silicone rubber falls to the bottom of the pot. The degas chamber is vented as step one of degassing the silicone rubber is complete and the rubber is then poured over the part to be replicated and allowed to cure to create the mold.

Once the two halves of the silicone rubber model are completed and cleaned they are assembled being ready for the resin casting process. The resin is typically a two-part plastic type material, for example, Smooth-Cast which is a casting compound consisting of two liquid prepolymers that can be mixed and cured to form a durable plastic. Air bubbles can also get trapped into the resin by air inclusion during the mixing process which hardeners together with the resin. Air inclusion can also occur from air trapped in molds or air trapped due to improper casting and molding techniques. Bubbles can also be caused by volatile components being stripped out of the materials while casting under vacuum or gasses generated during the reaction (hardening) process.

Degassing of resins is commonly done after the resin is poured into the mold. One major obstacle is to prevent air from getting trapped in casting recessed pockets and small features. Fine surface details and undercuts on the part can often have trapped air and not get filled completely with resin. This will leave the part undercut of some fine surface details. One trick is to include vent holes in the mold so the resin flows upward pushing out the trapped air. It is impractical however to add vent holes every as it would take forever to make the part. This is where large diameter and long vacuum degassing chambers becomes very important for increasingly complicated part fabrication.

It is also important to have the proper sized vacuum pump to pull vacuum quickly on the resin to remove the trapped air bubbles. This is most important for highly reactive resin materials, such as, fast reacting polyurethanes or water clear polyurethanes. These resins have a short pot life which require a larger volume vacuum chambers and faster-pumping speed vacuum pumps to degas quickly as the parts will start to set up and harden (start to cure). It is important to remove the trapped air bubble quickly during the short working time of these resins. The opposite tends to be true for silicon-based resin compounds which tend to be much less reactive and therefore have a longer pot life.


Ideal Vacuum can design and build custom degassing chambers, call our office at (505) 872-0037 for more information.



Press ESC to Close


Chamber Specifications This Kit Contains:
  • Chamber Size Internal:
  • 165 x 165 x 348mm
    6.50in x 6.50in x 13.70in
  • External:
  • 170.2 x 170.2 x 397.5mm
    6.70 x 6.70 x 15.65in
  • Weight:
  • 8.15kg (18lbs)
  • Ultimate pressure:
  • 1 x 10-3 Torr (1 mTorr)
  • 1 Ideal Vacuum Degas Chamber
  • 1 Edwards RV3 Rotary Vane Vacuum Pump
  • 1 KF-16 to KF-25 Conical Reducer
  • 1 KF-10 to KF-16 Adaptive Centering Rings
  • 1 KF-16 Hinge Clamp
  • 1 KF-25 Ideal Vacuum Butterfly Valve
  • 3 KF-25 Centering Rings
  • 1 GP 475 Vacuum Gauge Controller
  • 1 GP 275 KF25 Convectron Sensor
  • 1 Edwards AV10K KF-10 Air Admittance Valve
  • 4 KF-25 Hinge Clamps


Availability Of Kit Components

Kit: P107940 - Ideal Vacuum Degas Chamber Kit RV3 Rotary Vane Pump, Butterfly, Air Valve, GP 475 Gauge, 275 Sensor
Component
Desc.
Req'd
Avail
Hinge Clamp KF-10, KF-16 Vacuum Fittings, ISO-KF Flange Size NW10, NW-16, Aluminum
1
3577
Hinge Clamp KF-25 Vacuum Fittings, ISO-KF Flange Size NW-25, Aluminum
4
3689
Reducer Conical KF-16 to KF-25 Vacuum Fittings, ISO-KF Flange Size NW-16 to NW-25, Stainless Steel
1
54
Centering Ring Adaptive KF10 to KF16 Vacuum Fittings, ISO-KF Flange Size NW-10 to NW-16
1
226
NEW Edwards 3 RV3 Rotary Vane Dual Stage Mechanical Vacuum Pump A65201906
1
3
Centering Ring KF-25 Vacuum Fittings, ISO-KF Flange Size NW-25, Stainless Steel & Buna O-Ring
3
341
Edwards AV10K Air Admittance Vent Valve, KF10, NW10, HE30 Grade Aluminum, C35103000
1
4
IVP Butterfly Valve, Manual, ISO KF-25 Interface, NW-25 Vacuum Fittings, Stainless Steel
1
29
Granville Phillips 475 Convectron Gauge Kit, with 275 Convectron Gauge KF25, NO Set Points
1
4
Ideal Vacuum Degas Chamber, 304 Stainless Steel, Hinged Door, with 3 KF25 Vacuum Ports
1
1
PDF Logo Granville Phillips 475 Convectron Gauge Controllers.pdf

PDF Logo Edwards RV3 and RV5 Rotary Vane Vacuum Instruction Manual

PDF Logo Granville Phillips 475 Convectron Gauge Controller Spec Sheet.pdf

PDF Logo MKS 275 Convectron Vacuum Gauges Data Sheet.pdf



You may wish to consider the following products:

Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2