Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Agilent 305FS Turbo Pumps On Sale Leybold BCS Series Pumps On Sale Leybold Sogevac Neo-D Dual Stage Rotary Vane Vacuum Pumps On Sale Ideal Vacuum Modular Vacuum Chambers On Sale Edwards Stocks Microvac Piston Pumps

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers ExploraVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Vacuum Pressure Measurement Recirculating Chillers And Water Baths
Product Image 1
Product Image 2
Product Image 3

HVA CF Conflat 3.375 inch Gate Valve 2.00 inch ID Manual Gate Valve, SS

Print Version
Condition:
  New
Part Number:
  P104238
Warranty:
  Against Product Defect

Available Now:  2  

Sale: $2,107.09

HVA CF Conflat 3.375 inch Gate Valve 2.00 inch ID Manual Gate Valve, SS 2107.0875
Expecting:   2
Anticipated Arrival:  2 on 2023-07-21
×

Load

Description

Conflat CF 3.375 inch Gate Valve, 2.00 inch ID 50 mm Manual Gate Valve, Viton Gate / Copper Bonnet Seals, Stainless Steel.


In the simplest of terms, HVA Conflat CF 3.375 inch OD vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve's carriage/gate. The actuator is attached to the valve's body via a rectangular bonnet flange. The gate closes or opens one of the valves body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system.

The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration.

The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Conflat CF 3.375 inch Port Flange and a 2.00 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Brochure

Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2