With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These graduated Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with one 90 degree #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with one 90 degree #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with one, inline #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 8 mm adjustable high-vacuum CG valve which produces a leak-tight O-ring seal. They are designed with one, inline #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These are the replacement high-vacuum valve assembly designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves include the 2 Viton O-ring seals (additional replacement seals are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

These are the replacement high-vacuum valve assembly designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves include the 3 Viton O-ring seals (additional replacement seals are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

2 Viton 0-Rings These are the replacement O-ring kits for our high-vacuum valve assembly are designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves O-ring kits include 2 Viton O-ring seals. (additional replacement high vacuum valve assemblies are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

These are the replacement O-ring kits for our high-vacuum valve assembly are designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves O-ring kits include the 3 Viton O-ring seals (2) stem (1) tip. (additional replacement high vacuum valve assemblies are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

These Viton O-rings are used in our Ideal Vacuum Glass Vessel Manifolds, U-Tubes and Glass Elbows, with 15mm ID, also requires No. 28 pinch clamp for vacuum seal. They are made of Viton® which is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton is a registered trademark of DuPont Performance Elastomers. O-Ring, Viton for Ideal Vacuum Glass Manifold, U-Tube, Glass Elbow. Dimensions (inch): 0.75 x 0.938 x 0.094

These Viton O-rings are used in our Ideal Vacuum Glass Vessel Manifolds with 25 mm ID, also requires No. 35 pinch clamp for vacuum seal. See RED Circled Graphic Above For Location.They are made of Viton which is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton is a registered trademark of DuPont Performance Elastomers. O-Ring, Viton for Ideal Vacuum Glass Manifold. Dimensions(inch): 217 1.171 x .139

These glass, inline adapters are designed to work with our Sample Seal- liquid sample holders. These adapters have 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with 2, inline #9 O-ring joint outer diameter glass connections. These adapters are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to control the flow of a precursor liquid sample. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These glass, inline adapters are designed to work with our Sample Seal- liquid sample holders. These adapters have 1, 0 to 8 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with 2, inline #9 O-ring joint outer diameter glass connections. These adapters are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to control the flow of a precursor liquid sample. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These glass, female connecting adapters are designed to work with our Sample Seal- liquid sample holders. They are designed to bridge glass connections between 2 different flange sizes. This female adapter has 1, #9 joint flange. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

These glass, male connecting adapters are designed to work with our Sample Seal- liquid sample holders. They are designed to bridge glass connections between 2 different flange sizes. This male adapter has 1, #9 joint flange. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

NVacuo #15 Oring Joint Tee designed with dimensions compatible with all other NVacuo Products to aid with easy assembly and configurable options. These make it easy to mount and dismount flanged U-tubes from NVacuo manifolds and provide countless different setup options. This stands 4 Inches tall and uses (3) 15 mm O-Rings and No. 28 Pinch Clamp for Vacuum Seal. Please call 505-872-0037 for more information.

NVacuo #15 Oring Elbow designed with dimensions compatible with all other NVacuo Products to aid with easy assembly and configurable options. These make it easy to mount and dismount flanged U-tubes from NVacuo manifolds and provide countless different setup options. This stands 4 Inches tall and is uses 2 Inches from the center of each flange to the face of the adjacent flange. Requires 15 15 mm ID O-Rings and No. 28 Pinch Clamp for Vacuum Seal. Please call 505-872-0037 for more information.

These NVacuo manifold systems provide the best solution for gas distillation and dynamic setup environments. Easily configurable with all other NVacuo products, this manifold has 8 Inch spacing between each of its four bottom #15 O-ring joint flanges. Each is also equipped with 0-4 mm High Vacuum Valves with O-ring on tip making it easy and simple to attach U-tubes for holding samples with the standard NVacuo Tees and Elbows built with the easy to use Universal O-ring joint flange design. This design means no hassling with glass end tubes and compression fitting adapters for every glass connection. The manifold is also designed with two top #15 O-ring joint flanges for mounting pressure gauges, as well as two main #25 O-ring joint flanges at each end of the manifold for pumping down the system and releasing gas samples for percent concentration measurements. The #15 joint flange requires #116 O-ring and No. 28 pinch clamp. The #25 joint flange requires #214 or #217 O-ring and No. 35 pinch clamp. Replacement O-rings and pinch clamps are sold separately on this website, please call 505-872-0037 for more information.

These #28 O-Ring Joint Pinch clamps are used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They have a screw type locking device and are used for 12 or 15 mm inner diameter O-Ring Joints or 28 mm spherical ball joints. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Requires #116 O-Ring for seal. Made of Stainless Steel.#28 O-ring Joint Clamp

These #35 O-Ring Joint Pinch clamps are used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They have a screw type locking device and are used for 20 or 25 mm inner diameter O-Ring Joints or 35 mm spherical ball joints. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Requires #217or #214 O-Ring for seal. Made of Stainless Steel.#35 O-ring Joint Clamp

These 15mm Flexible O-Ring Bellows Joints can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #116 O-Rings and #28 O-Ring joint pinch clamps. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints, and allow a small degree of flexibility. Made of Stainless Steel.

These NW KF-16 to 9mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #9 O-Rings and #18 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

These KF-16 to 15 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #15 O-Rings and #28 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

These KF-25 to 9 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #9 O-Rings and #18 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

These KF-25 to 15 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #15 O-Rings and #28 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

These KF-25 to 25 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #25 O-Rings and #35 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

These 15mm Nipples can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #116 O-Rings and #28 O-Ring joint pinch clamps. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Made of Stainless Steel.

These 15mm Nipples can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #116 O-Rings and #28 O-Ring joint pinch clamps. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Made of Stainless Steel.