Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Sales Ideal Vacuum Command Valves Helium Leak Detectors On Sale On Sale New nXDS Scroll Pumps Agilent Helium Leak Detectors on Sale Turbo Pumps on Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers Vacuum Chamber Systems Fittings and Flanges Feedthroughs Vacuum Valves Turbo Pump Systems Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Grease Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Gauges And Controllers Pressure Measurement Chillers

Teledyne Hastings DV-6M Thermocouple Vacuum Gauge Tube for 0.001 to 1 Torr Range
In Stock: 3
Expecting: 15
Arrival: 15 on 2020-02-25


Teledyne Hastings DV-6M thermocouple vacuum gauge tubes can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6M vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6M tubes are matched and interchangeable without calibration adjustments. The DV-6M thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6M tubes have a standard 1/8 inch male NPT vacuum fitting are brand new with full Teledyne Hastings warranty (DV-6M Stock Number 55-38). Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. A common variant is the Pirani gauge which uses a single platinum filament as both the heated element and RTD. These gauges are accurate from 10 Torr to 10−3 Torr, but they are sensitive to the chemical composition of the gases being measured (from Wikipedia.org).

Condition: New



Product Number: P102046



Price: $91.08



Teledyne Hastings DV-6R Ruggedized Thermocouple Vacuum Gauge Tube for 0.001 to 1 Torr Range
In Stock: 22


Teledyne Hastings DV-6R ruggedized thermocouple vacuum gauge tubes have a rugged steel housing and can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6R vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6R tubes are matched and interchangeable without calibration adjustments. The DV-6R thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6R tubes have a standard 1/8 inch male NPT vacuum fitting are brand new with full Teledyne Hastings warranty (DV-6R Stock Number 55-38R). Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. A common variant is the Pirani gauge which uses a single platinum filament as both the heated element and RTD. These gauges are accurate from 10 Torr to 10−3 Torr, but they are sensitive to the chemical composition of the gases being measured (from Wikipedia.org).

Condition: New



Product Number: P102045



Price: $110.28



Teledyne Hastings DV-6M-KF-16 Thermocouple Vacuum Gauge Tube, KF16 Fitting for 0.001 to 1 Torr Range
In Stock: 4


Teledyne Hastings DV-6M-KF-16 thermocouple vacuum gauge tubes have a rugged steel housing and can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6M-KF-16 vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6M-KF-16 tubes are matched and interchangeable without calibration adjustments. The DV-6M-KF16 thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6M-KF-16 tubes have a KF16 NW16 vacuum fitting are brand new with full Teledyne Hastings warranty (DV-6M-KF-16 Stock Number 55-251). Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. A common variant is the Pirani gauge which uses a single platinum filament as both the heated element and RTD. These gauges are accurate from 1 Torr to 10−3 Torr, but they are sensitive to the chemical composition of the gases being measured (from Wikipedia.org).

Condition: New



Product Number: P102616



Price: $242.88



Teledyne Hastings DV-6M-KF-25 Thermocouple Vacuum Gauge Tube, KF25 Fitting for 0.001 to 1 Torr Range
In Stock: 5


Teledyne Hastings DV-6M-KF-25 thermocouple vacuum gauge tubes have a rugged steel housing and can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6M-KF-25 vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6M-KF-25 tubes are matched and interchangeable without calibration adjustments. The DV-6M-KF-25 thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6M-KF-25 tubes have a KF25 NW25 vacuum fitting are brand new with full Teledyne Hastings warranty (DV-6M-KF-25 Stock Number 55-267). Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. A common variant is the Pirani gauge which uses a single platinum filament as both the heated element and RTD. These gauges are accurate from 1 Torr to 10−3 Torr, but they are sensitive to the chemical composition of the gases being measured (from Wikipedia.org).

Condition: New



Product Number: P102617



Price: $242.88



Teledyne Hastings DV-6M-VCR Thermocouple Vacuum Gauge Tube, 4-VCR Fitting for 0.001 to 1 Torr Range
In Stock: 12


Teledyne Hastings DV-6M-VCR thermocouple vacuum gauge tubes have a rugged steel housing and can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6M-VCR vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6M-VCR tubes are matched and interchangeable without calibration adjustments. The DV-6M-VCR thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6M-VCR tubes have a 4-VCR vacuum fitting are brand new with full Teledyne Hastings warranty (DV-6M-VCR Stock Number 55-283). Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. A common variant is the Pirani gauge which uses a single platinum filament as both the heated element and RTD. These gauges are accurate from 1 Torr to 10−3 Torr, but they are sensitive to the chemical composition of the gases being measured (from Wikipedia.org).

Condition: New



Product Number: P102618



Price: $191.40



Teledyne Hastings DV-6R-CF Thermocouple Vacuum Gauge Tube, Conflat 1.33 Inch Fitting 55-38R-CF
In Stock: 1


Teledyne Hastings DV-6R-CF thermocouple vacuum gauge tubes have a rugged steel housing and can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6R-CF vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6R-CF tubes are matched and interchangeable without calibration adjustments. The DV-6R-CF thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6R-CF tubes have a 1.33 Inch CF (Mini Conflat) vacuum fitting are brand new with full Teledyne Hastings warranty (DV-6R-CF Stock Number 55-38R-CF).

Condition: New



Product Number: P104376



Price: $292.03



Teledyne Hastings OM-25-OFV Extension Cable for Vacuum Gauges, 25 ft., PN- OM-25-OFV
Out of Stock


Teledyne Hastings OM-25-OFV 25 ft. long extension cable for connecting controllers to vacuum gauges.

Condition: New



Product Number: P1010903



Price: $100.19



Teledyne Hastings DV-6S Ruggedized Thermocouple Vacuum Gauge Tube 1/8 in. NPT, 0.001 to 1 Torr Range
In Stock: 4


PN: DV-6S Teledyne Hastings DV-6S ruggedized thermocouple vacuum gauge tubes have a rugged steel housing and can measure pressure between 0.001 and 1 Torr (1 to 1000 mTorr). Teledyne Hastings DV-6S vacuum sensors are calibrated for nitrogen or air, but conversion factors for other gases are available. The Teledyne Hasting DV-6S tubes are matched and interchangeable without calibration adjustments. The DV-6S thermocouple tubes are for use with Teledyne Hastings Digital or Analog VT-6 thermocouple gauge controllers. These DV-6S tubes have a standard 1/8 inch male NPT vacuum fitting are brand new with full Teledyne Hastings warranty. Part Number DV-6S. Thermocouple sensors (thermal conductivity gauges) rely on the fact that the ability of a gas to conduct heat decreases with pressure. In this type of gauge, a wire filament is heated by running current through it. A thermocouple or Resistance Temperature Detector (RTD) can then be used to measure the temperature of the filament. This temperature is dependent on the rate at which the filament loses heat to the surrounding gas, and therefore on the thermal conductivity. A common variant is the Pirani gauge which uses a single platinum filament as both the heated element and RTD. These gauges are accurate from 10 Torr to 10−3 Torr, but they are sensitive to the chemical composition of the gases being measured (from Wikipedia.org).

Condition: New



Product Number: P105174



Price: $221.16



Teledyne Hastings DB-20 Reference Tube, Equivalent Gauge Tube DV-6M, Range 0-1000 mTorr, PN: DB-20
In Stock: 3


PN: DB-20, NIST-DV-6M The Teledyne Hastings Instruments (THI) DB-20 Reference Tube is an evacuated, sealed vacuum gauge tube accurately calibrated to precisely simulate a gauge tube at a given operating pressure. This Teledyne Hastings Instruments DB-20 Reference Tube it is electrically equivalent to the Gauge Tube DV-6M series Range 0-1000 mTorr, used with THI instruments. The DB-20 Reference Tube permits quick and easy recalibration of THI Vacuum Gauge Indicators by merely plugging the instrument into the reference and adjusting the calibration “current set” potentiometer until the instrument reads the exact pressure noted on the reference. THI Reference Tubes are available equivalent to most THI Gauge Tubes. Part Number DB-20.

Condition: New



Product Number: P105330



Price: $464.31



Teledyne Hastings Digital VT Thermocouple Vacuum Gauge Controller for DV-6 Tubes
In Stock: 4


These Teledyne Hastings Digital VT thermocouple vacuum gauge controllers are matched for the DV-6 thermocouple vacuum gauge tubes (Stock Number 55-288DV6, Operates on 115 VAC). They measure pressure between the range of 0.001 and 1 Torr (1 to 1000 mTorr). The Teledyne Hastings Digital VT thermocouple controllers are self-contained instruments that offer extreme versatility for most vacuum applications. The electronic design assures long life and minimal maintenance. Compact Digital VT Models are ready for mounting onto a panel. Teledyne Hasting thermocouple tubes are also available but sold separately.

Condition: New



Product Number: P102051



Price: $481.56



Teledyne Hastings Digital DCVT Thermocouple Vacuum Gauge Controller for DV-4, DV-5, DV-6 Gauge Tubes
In Stock: 1


The Teledyne Hastings Instrument’s Digital DCVT, is a digital readout version of the successful CVT Series. These pressure gauges offer exceptional stability, accuracy, and reliability. This instrument has been designed for laboratory or light industrial applications. It is not suitable for outdoor or heavy industrial areas where spraying liquid or wash-downs may occur. A precision A/D converter, with a microprocessor is used to measure the gauge tube’s signal output; it converts the measurement to a pressure reading using the gauge tube’s well defined output/pressure function, and then displays the result. A 0 – 1 volt amplified non-linear gauge tube output version along with 0-1volt, 0-5volt, 0-10volt, 0-20mA, and 4-20mA linear gauge tube output versions are available on the back panel. This unit accepts 90-250 VAC for input power.

Condition: New



Product Number: P107682



Price: $736.00



Teledyne Hastings Analog VT Thermocouple Vacuum Gauge Controller for DV-6 Tubes
In Stock: 3


These Teledyne Hastings Analog VT thermocouple vacuum gauge controllers are matched for the DV-6 thermocouple vacuum gauge tubes (Stock Number VT-6-X-Y, Operates on 115 VAC). They measure pressure between the range of 0.001 and 1 Torr. The Teledyne Hastings Analog VT thermocouple controllers are self-contained instruments that offer extreme versatility for most vacuum applications. The electronic design assures long life and minimal maintenance. Compact Analog VT Models are ready for mounting onto a panel. Teledyne Hasting thermocouple tubes are also available but sold separately.

Condition: New



Product Number: P102055



Price: $535.00



Teledyne Hastings Enclosed Cabinet Analog VT Thermocouple Vacuum Gauge Controller for DV-6 Tubes
In Stock: 1


These Teledyne Hastings Enclosed Cabinet Analog VT thermocouple vacuum gauge controllers are matched for the DV-6 thermocouple vacuum gauge tubes (Stock Number VT-6B-X-Y, Operates on 115 VAC). They measure pressure between the range of 0.001 and 1 Torr. The Teledyne Hastings Analog VT thermocouple controllers are self-contained instruments that offer extreme versatility for most vacuum applications. The electronic design assures long life and minimal maintenance. Compact Analog VT Models are ready for mounting onto a panel. Teledyne Hasting thermocouple tubes are also available but sold separately.

Condition: New



Product Number: P102056



Price: $709.84



Teledyne Hastings Enclosed Cabinet Analog VT Thermocouple Vacuum Gauge Controller for DV-6 Tubes, 5 Channels
Out of Stock


5 Gauge Channels These Teledyne Hastings Enclosed Cabinet Analog VT thermocouple vacuum gauge controllers are matched for the DV-6 thermocouple vacuum gauge tubes (Stock Number VT-6S5-X-Y, Operates on 115 VAC). They measure pressure between the range of 0.001 and 1 Torr. The Teledyne Hastings Analog VT thermocouple controllers are self-contained instruments that offer extreme versatility for most vacuum applications. The electronic design assures long life and minimal maintenance. Compact Analog VT Models are ready for mounting onto a panel. Teledyne Hasting thermocouple tubes are also available but sold separately. This unit has 5 gauge channels. Each channel requires a seperate gauge and connection cable.

Condition: New



Product Number: P1010698



Price: $1,111.91



Teledyne Hastings Analog CVT26A Thermocouple Vacuum Gauge Panel Mount Controller, 2 Set Points
Out of Stock


These Teledyne Hastings Analog CVT26A (panel mount) thermocouple vacuum gauge controllers are matched for the DV-6 thermocouple vacuum gauge tubes and operate on 115VAC. They measure pressure between the range of 0-1000 mTorr . The Teledyne Hastings Analog CVT26A thermocouple controllers are self-contained instruments that offer extreme versatility for most vacuum applications. The electronic design assures long life and minimal maintenance. They are fully automatic, continuous-reading instruments for unlimited vacuum applications. These controllers have 2 set points that are durable and have 5 amp single pole double throw relays which can be configured normally open or normally closed.

Condition: New



Product Number: P104917



Price: $1,050.00



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com