Lake Shore Model 211 Single Channel Cryopump Temperature Indicator Controller Monitor 110/220 VAC This Lake Shore single-channel Model 211 temperature monitor provides the accuracy, resolution, and interface features of a benchtop temperature monitor in an easy to use, easily integrated, compact instrument. With appropriate sensors, the Model 211 measures temperature from 1.4 K to 800 K including temperatures in high vacuum and magnetic fields. Alarms, relays, user-configurable analog voltage or current output, and a serial interface are standard features on the Model 211. It is a good choice for liquefied gas storage and monitoring, cryopump control, cryo-cooler, and materials science applications, and for applications that require greater accuracy than thermocouples allow. CONNECTS to the CVI TM 500 CryoPump. See Downloads to the side for 211 User Manual.pdf Features: AC Power Supply 110-220 VAC 50-60hz, 5V 6w Operates down to 1.2 K with appropriate sensor One sensor input Supports diode and RTD sensors 0 V to 10 V or 4 mA to 20 mA output Large 5-digit LED display RS-232C serial interface and alarm relays 25 pin D-sub input connector (input cable sold separately)

Lake Shore Model 211 Cryopump Temperature Indicator Controller Monitor 110/220 VAC This Lake Shore single-channel Model 211 temperature Controller Monitor Expander Cable connects the Model 211 to the temperature sensor of the Cryo Pump. Features: 25 pin D-sub input connector & 6 pin cannon plug, 15ft.

Cryopump Temperature Indicator Controller Model 1, Panel Mount, No set points This Cryopump Temperature Indicator is designed to monitor cryopump temperature in Kelvin. The DB-9 Connector has two output signals, the diode signal and an analog voltage output signal with a range of 0.100 DC Volt to 3.20 DC Volts (0.100 VDC= 10 Degrees Kelvin and 3.20 VDC= 320 Degrees Kelvin). Comes with with 10 ft. control cable. This model 1 unit has no setpoints. The ACC TEMPERATURE INDICATOR is used to monitor cryopump operating temperatures in the range of 10 to 320 Kelvin.

Edwards CTI-Cryogenics Temperature Indicator by Helix, Rebuilt. PN: 8042002G003 USED The Edwards CTI-Cryogenics Temperature Indicator, by Helix is designed expressly for a long usable life, very reliable, and is very easy to use. The CTI-Cryogenics Temperature Indicator provides outstanding performance with most Cryo-Torr Cryopumps. The unit is fully compatible with new and existing CTI-Cryogenics pumping systems. This unit is used. We also Repair and Rebuild Cryogenic Temperature Indicator, Vacuum Pumps and Systems For Services: CALL (505) 872-0037

Edwards CTI Cryo-Torr Pump Diode Temperature Cable, 10 ft. long. NEW These are Edwards CTI Helix Cryo-Torr Pump Diode Temperature Cables, 10 ft. long, NEW. Connects to the following Cryo Pumps and Helium Compressors: Pumps: Cryo-Torr 100, 7, 8, 8F, 10 Helium Compressors: 9700, 9600, 8500, 8510, 8300, 8200, SC We also Repair and Rebuild Cryogenic Vacuum Pumps and SystemsFor Services: CALL (505) 872-0037

Edwards Cryo-Torr Pump Diode Temperature Cable, 10 ft. long. USED These are Edwards CTI Helix Cryo-Torr Pump Diode Temperature Cables, 10 ft. long, USED. Connects to the following Cryo Pumps and Helium Compressors: Pumps: Cryo-Torr 100, 7, 8, 8F, 10 Helium Compressors: 9700, 9600, 8500, 8510, 8300, 8200, SC We also Repair and Rebuild Cryogenic Vacuum Pumps and SystemsFor Services: CALL (505) 872-0037