Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Leybold BCS Series Pumps On Sale Ideal Vacuum Modular Vacuum Chambers On Sale Edwards nEXT300D TStations On Sale Agilent DS Series Rotary Vane Pumps On Sale Leybold Sogevac Neo-D Dual Stage Rotary Vane Vacuum Pumps On Sale Edwards iXH Dry Semiconductor Pumps On Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers ExploraVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

HVA CF Conflat 1.33 inch Gate Valve 0.625 inch ID Manual Gate Valve, SS
Out of Stock
Expecting: 13
Arrival: 6 on 2022-06-26


Conflat CF 1.33 inch Gate Valve, 0.625 inch 16 mm Manual Gate Valve, Viton Gate / Copper Bonnet Seals, Stainless Steel. (PN 11120-0060) In the simplest of terms, HVA Conflat CF 1.33 inch vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve's carriage/gate. The actuator is attached to the valve's body via a rectangular bonnet flange. The gate closes or opens one of the valves body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Conflat CF 1.33 inch Port Flange and a 0.625 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104197



Price: $1,647.51



HVA CF Conflat 2 3/4 inch Gate Valve, 1.5 inch ID Manual Gate Valve, SS
Out of Stock
Expecting: 12
Arrival: 1 on 2022-03-10


Conflat CF 2-3/4 Inch Gate Valve, 1.5 inch Manual Gate Valve, Viton Gate / Copper Bonnet Seals, U.S. Bolt CF-F 2.75 Inch OD Flanges, Stainless Steel (PN 11120-0150) In the simplest of terms, HVA vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve’s carriage/gate. The actuator is attached to the valve’s body via a rectangular bonnet flange. The gate closes or opens one of the valve’s body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Cf Conflat 2.75 inch Port Flange and a 1.5 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104200



Price: $2,050.74



HVA CF Conflat 3.375 inch Gate Valve 2.00 inch ID Manual Gate Valve, SS
In Stock: 2
Expecting: 2
Arrival: 2 on 2023-07-21


Conflat CF 3.375 inch Gate Valve, 2.00 inch ID 50 mm Manual Gate Valve, Viton Gate / Copper Bonnet Seals, Stainless Steel. (PN 11120-0200) In the simplest of terms, HVA Conflat CF 3.375 inch OD vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve's carriage/gate. The actuator is attached to the valve's body via a rectangular bonnet flange. The gate closes or opens one of the valves body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Conflat CF 3.375 inch Port Flange and a 2.00 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104238



Price: $2,107.09



HVA CF Conflat 4.5 inch Gate Valve, 2.5 inch ID Manual Gate Valve, SS
In Stock: 1
Expecting: 15
Arrival: 1 on 2022-03-10


Conflat CF 4.5 inch Gate Valve, 2.5 inch 63mm Manual Gate Valve, Viton Gate / Copper Bonnet Seals, Stainless Steel (PN 11120-0250) In the simplest of terms, HVA Conflat CF 4.5 inch vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve's carriage/gate. The actuator is attached to the valve's body via a rectangular bonnet flange. The gate closes or opens one of the valves body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Conflat CF 4.5 inch Port Flange and a 2.5 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104198



Price: $2,490.48



HVA CF Conflat 6.00 inch Gate Valve, 4.00 Inch ID Manual Gate Valve, SS
Out of Stock
Expecting: 19
Arrival: 1 on 2022-03-10


Conflat CF 6.00 inch Gate Valve, 4.00 inch ID 100 mm Manual Gate Valve, Viton Gate / Copper Bonnet Seals, Stainless Steel. (PN 11120-0400) In the simplest of terms, HVA Conflat CF 6.00 inch OD vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve's carriage/gate. The actuator is attached to the valve's body via a rectangular bonnet flange. The gate closes or opens one of the valves body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Conflat CF 6.00 inch Port Flange and a 4.00 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104237



Price: $2,955.75



HVA CF Conflat 8.00 inch Gate Valve, 6.00 inch ID Manual Gate Valve, SS
Out of Stock
Expecting: 10
Arrival: 1 on 2022-08-08


Conflat CF 8.00 inch Gate Valve, 6.00 inch ID 160 mm Manual Gate Valve, Viton Gate / Copper Bonnet Seals, Stainless Steel. (PN 11120-0600) In the simplest of terms, HVA Conflat CF 8.00 inch OD vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve's carriage/gate. The actuator is attached to the valve's body via a rectangular bonnet flange. The gate closes or opens one of the valves body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Conflat CF 8.00 inch Port Flange and a 6.00 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104236



Price: $3,492.00



HVA CF Conflat 10.00 inch Gate Valve, 8.00 inch Manual Gate Valve, SS
Out of Stock
Expecting: 9
Arrival: 1 on 2022-06-26


Conflat 10 Inch Gate Valve, 8 inch Manual Gate Valve, Viton Gate / Copper Bonnet Seals, U.S. Bolt CF-F 10.00 Inch OD Flanges, Stainless Steel (PN 11120-0800) In the simplest of terms, HVA vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve’s carriage/gate. The actuator is attached to the valve’s body via a rectangular bonnet flange. The gate closes or opens one of the valve’s body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Manual Gate Valve UHV (Ultra High Vacuum) with a Cf Conflat 10 inch Port Flange and a 8 inch ID opening. For Spcecifications see graphic below. The installation and operating instructions manual can be downloaded in pdf format below.

Condition: New



Product Number: P104199



Price: $4,781.66



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com