Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Agilent Varian Helium Leak Detectors On Sale Edwards nXR Multi Stage Roots Pumps On Sale Agilent TriScroll Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Buna-N Nitrile O-Ring for Grooved ASA 5.0 / ANSI 1.5 Flange
In Stock
7


Buna-N Nitrile O-Ring for Grooved ASA 5.0 / ANSI 1.5 Flange. This is an elastomer Buna-N Nitrile O-Ring for a grooved ASA 5.0 / ANSI 1.5 flange. The O-ring’s width is 0.120 in. and its I.D. is 2.500 in. Used to mate an ASA 5.0 / ANSI 1.5 grooved flange with an ASA 5.0 / ANSI 1.5 smooth (non-grooved) flange. Buna-N, also known as nitrile, is less expensive than either Viton or silicone O-ring material. Buna O-rings exhibit excellent resistance to all petroleum-based oils and fuels, as well as water, various alcohols, silicone greases, and hydraulic fluids. Buna also displays good tear resistance and non-polar solvent resistance. Buna O-rings can be used in rough vacuum systems and are rated for high vacuum to 1 x 10-8 Torr. Buna has a lower high temperature limit of about 120°C, but can effectively seal down to -30°C. Buna can be a cost effective seal solution when higher temperature bakeout is not required. The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107449



Price: $4.95




Currency: US Dollar (USD)

Buna-N Nitrile O-Ring for Grooved ASA 6.0 / ANSI 2 Flange
In Stock
95


Buna-N Nitrile O-Ring for Grooved ASA 6.0 / ANSI 2 Flange. This is an elastomer Buna-N Nitrile O-Ring for a grooved ASA 6.0 / ANSI 2 flange. The O-ring’s width is 0.120 in. and its I.D. is 3.500 in. Used to mate an ASA 6.0 / ANSI 2 grooved flange with an ASA 6.0 / ANSI 2 smooth (non-grooved) flange. Buna-N, also known as nitrile, is less expensive than either Viton or silicone O-ring material. Buna O-rings exhibit excellent resistance to all petroleum-based oils and fuels, as well as water, various alcohols, silicone greases, and hydraulic fluids. Buna also displays good tear resistance and non-polar solvent resistance. Buna O-rings can be used in rough vacuum systems and are rated for high vacuum to 1 x 10-8 Torr. Buna has a lower high temperature limit of about 120°C, but can effectively seal down to -30°C. Buna can be a cost effective seal solution when higher temperature bakeout is not required. The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107450



Price: $7.68




Currency: US Dollar (USD)

Buna-N Nitrile O-Ring for Grooved ASA 7.5 / ANSI 3 Flange
In Stock
52


Buna-N Nitrile O-Ring for Grooved ASA 7.5 / ANSI 3 Flange. This is an elastomer Buna-N Nitrile O-Ring for a grooved ASA 7.5 / ANSI 3 flange. The O-ring’s width is 0.120 in. and its I.D. is 4.625 in. Used to mate an ASA 7.5 / ANSI 3 grooved flange with an ASA 7.5 / ANSI 3 smooth (non-grooved) flange. Buna-N, also known as nitrile, is less expensive than either Viton or silicone O-ring material. Buna O-rings exhibit excellent resistance to all petroleum-based oils and fuels, as well as water, various alcohols, silicone greases, and hydraulic fluids. Buna also displays good tear resistance and non-polar solvent resistance. Buna O-rings can be used in rough vacuum systems and are rated for high vacuum to 1 x 10-8 Torr. Buna has a lower high temperature limit of about 120°C, but can effectively seal down to -30°C. Buna can be a cost effective seal solution when higher temperature bakeout is not required. The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107451



Price: $6.97




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com