Agilent Varian TriScroll 600 Needle Bearing, Sixe 8x12x15 mm, Crank Pin Bearings For Orbiting Scroll
Agilent Varian Part Number 330024
These Agilent Varian TriScroll 600 needle bearings, of size 8x12x15mm, are used on the TriScroll 600 crank pins that hold the orbiting scroll in place. These needle bearings are prepacked with Krytox PFPE vacuum grease and ready to install. Each TriScroll 600 dry scroll vacuum pump requires 3 each and these bearings are also included in the major maintenance kit, Agilent Varian part number PTSS0600MK (sold separately). Vacuum Technologies TriScroll 600 series pumps are designed to provide years of trouble-free service if maintenance procedures and intervals are observed. Bearing grease replenishment and tip seal replacement are recommended when the pump base pressure has risen to an unacceptably high level for your application. Bearings, rotary seals and O-rings should also be replaced if the pump exhibits humming or grinding noises from the bearings. Main bearing life may be shortened if your application requires the pumping of high quantities of water vapor. Use of the bearing purge will keep this water from impacting bearing life.