Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Agilent IDP-10 Dry Scroll Vacuum Pumps On Sale Pfeiffer ASM340 Leak Detectors On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Adixen 2021C2 Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Product Image 1
Product Image 2
Product Image 3

Agilent Varian 450 watt, 120V Heater Assembly for Diffusion Pump HS-2, for Santovac 5 Oil, 647302125

Print Version
Condition:
  New
Part Number:
  P106758
Warranty:
  Varian Warranty

Available Now   1  

Sale: $460.71

Agilent Varian 450 watt, 120V Heater Assembly for Diffusion Pump HS-2, for Santovac 5 Oil, 647302125 460.71
Currency: US Dollar (USD)

Description

Agilent Varian HS-2 Diffusion Pump, Replacement Part Heater Assembly, 450W, 120 VAC, for use with Santovac 5 oil.
Agilent Varian Part Number 647302125

This is a replacement part heater assembly (also known as heater element). 450 Watt, 120 VAC for use with Santovac 5 oil. Fits the Agilent Varian HS-2 Diffusion Pump. See exploded view diagram item 1 & 2 for heater assembly location below. For directions on how to replace heater assembly scroll down to AVAILABLE DOWNLOADS and see page 1-3 in the HS-2 Service Manual PDF.

Brochure

Specifications
Specification Value
Optimum Operating Range 2x10⁻³ Torr (2.7 mbar) to < 5x10⁻⁸ Torr (6.7 mbar)
Maximum Pumping Speed 285 l/s, Air
Maximum Throughput (Air), Max. 0.5 Torr l/s (.67 mbar)
Maximum Forepressure No Load 5.5 x 1010⁻± (.73 mbar)
Full Load 4.0 x 1010⁻± (.53 mbar)
Backstreaming Rate at Pump Inlet 1x10⁻³ mg/cm2/min (with cold cap)
Power Requiered (Approximately) 450 Watts
Warmup Time 15 minutes
Cooldown Time Less than 5 minutes to break jet
Less than 10 minutes to vent pump
Fluid Charge 100 cc All conventional and high performance pump fluids
Cooling Water Requirements 0.1 gpm at 60° °F
(15.6 ° °C to 26.7 ° °C) Inlet temperature
Backing Pump Size 5 cfm or larger for optimum throughput

HS-2 Diffusion Pump Replacement Parts List

Description Part No. Item
Heaters (one heater required per pump) 1
   120 V / 450 watt Heater Assembly 647302125 5.1
   240 V / 450 watt Heater Assembly 647302150 5.1
Heater Block 82920001 2
Heater Platen 82918301 3
Jet Assembly F0310301 4
Top Cap 5
Cold Cap Assembly F0600301 6
Teflon Button F0597001 7
Butly O-ring Kit, Parker 2-238 for 2in DP K0377159 8
Foreline Baffle 84166301 9
Baffle Retaining Ring 660156010 10
Heater Clip 648018010 11
2-56 x 1/8 R.H.M.S. SS Standard 12
#4-40 x 3/16 Rd. Hd. MS Ni-Plated Standard 13
10-32 Hex Hd. SS 648018010 14
1/4 - 20 x 13/8, Hex. Hd. Cap Screw/Lock Washer SS Standard 15
Reflector 82917301 16
Santovac 5 diffusion pump fluid, 100 cc P102288
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2
load time = 0.4648