× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Ideal Electromag Valve

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters, Traps, and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
 product photo

NEW Granville Phillips 307 Dual Ion Gauge Controller, Side-by-Side PS, 19 Inch Rack, 115VAC


The New 307 (VGC) for sale in its simplest form as pictured runs two ionization gauges (IG) Glass Tubulated or Nude (NOT UHV) one ion gauge at a time, in the range of 2 X 10-11 Torr. It is a left mount, side by side with power supply for 19 inch rack and comes with AC Power Cord and Power Supply/Control Unit Power Cable. With OPTIONAL Modules the 307 Vacuum Gauge Controller can operate two ion gauges (IG) sequentially, along with two Convectron gauges (CG) or two thermocouple gauges (TC) simultaneously. Pressure readout is via 3 front panel displays, analog output, and available computer interface. The 307 (VGC) is a modular instrument which can be easily customized to fit most user's exact needs.

Condition: New



Product Number: P104901



Price: $2,368.80



 product photo

Granville Phillips Dual Convectron Gauge PCB Card Module for GP 307 Vacuum Gauge Controller, 307013


This is a NEW Granville Phillips Dual Convectron Gauge PCB Printed Circuit Board Card (module) for Granville Phillips 307 Vacuum Gauge Controller. Permits pressure measurements from 1 x 10-4 to 990 Torr (N2 equivalent) from two Granville-Phillips Series 275 Convectron Gauges simultaneously. Two channel (A/B) modules allow for automatic turn-on and shut-off of ion gauges based on Convectron pressure. Also provides analog output of each indicated pressure. For Dual Convectron Card (module) installation procedures see page 17-26 of instruction manual. For specs, procedures for use and set up of the module, see Chapter 3 of the instruction manual.

Condition: New



Product Number: P104902



Price: $636.30



 product photo

Granville Phillips Dual Thermocouple PCB Card Module for GP 307 Vacuum Gauge Controller PN 307014


The Thermocouple Gauge (TC) Module for the Granville-Phillips 307 Vacuum Gauge Controller provides pressure measurement from 1 X 10-3 Torr (1.3 X 10-3 mbar or 1.33 x 10-1 Pascal) to 1 Torr. Two transducers are displayed simultaneously in the second and third display lines, and are denoted here by “TCA” and “TCB” respectively. Analog output is also provided. The thermocouple gauge can also be used to automatically turn on or off an ion gauge. When used with the process control, the two gauges control four setpoints, in addition to the ion gauge turn-on setpoints. For Dual Thermocouple Card (module) installation procedures see Chapter 1 pages 17-26 of the instruction manual. For specs, procedures for use and set up, see Chapter 4 of the instruction manual.

Condition: New



Product Number: P104903



Price: $775.60



 product photo

Granville Phillips Process Control Module, 6 set points for GP 307 Vacuum Gauge Controller PN 307017


This is a NEW Granville Phillips Process Control Module provides the 307 Vacuum Gauge Controller with single-pole, double-throw relays that may be controlled either by (6 digital setpoints) or by the built-in manual override switches. This Process Control Module has 6 user selectable channels. The first 2 channels are assigned to the ion gauges. If present, channels 3 and 4 are assigned to CGA or TCA; and 5 and 6 to CGB, TCB, or CMB. Switches are provided to assign channel 1 to IG1, IG2, or both; and likewise for channel 2. All six channels have selectable polarity for activation above or below the setpoint. For Process Control Card (module) installation procedures see pages 16-27 of instruction manual.pdf. For specs and procedures for use, see Chapter 5 of the instruction manual.

Condition: New



Product Number: P104904



Price: $585.90



 product photo

Granville Phillips Process Control Module 2 set points for GP 307 Vacuum Gauge Controller PN 307018


This is a NEW Granville Phillips Process Control Module and provides the 307 Vacuum Gauge Controller with single-pole, double-throw relays that may be controlled either by (2 digital setpoints) or by the built-in manual override switches. This Process Control Module has 2 user selectable channels. These 2 channels are assigned to the ion gauges. Switches are provided to assign channel 1 to IG1, IG2, or both; and likewise for channel 2. All two channels have selectable polarity for activation above or below the setpoint. For Process Control Card (module) installation procedures see pages 16-27 of instruction manual.pdf. For specs and procedures for use, see Chapter 5 of the instruction manual.

Condition: New



Product Number: P104905



Price: $258.30



 product photo

Granville Phillips Dual Ion Gauge IEEE 488 Module for GP 307 Vacuum Gauge Controller PN 307020


The IEEE-488 Module for the 307 Vacuum Gauge Controller allows data output to, and ion gauge control by, a host computer. Output is either by a command-response mechanism or by a talk-only mode which is invoked via a switch on the IEEE-488 board. For those who wish to configure the 488 bus to operate via SRQ interrupts, a switch is provided which will cause the 307 to generate an SRQ and wait for a serial poll before outputting each message. For IEEE-488 Module PCB Card installation procedures see page 16-27 of instruction manual. For specs and procedures for use, see Chapter 8 of the instruction manual.pdf.

Condition: New



Product Number: P104906



Price: $670.60



 product photo

Granville Phillips Convectron & Capacitance Manometer Module for GP 307 Gauge Controller PN 307026


This is a NEW Granville Phillips Convectron & Capacitance Manometer Diaphragm Module PCB Card and allows pressure measurement from 1.0 x 10-4 Torr to 1000 Torr, depending on transducer pressure range. Up to 250 mA of power supply current is available for temperature-compensated transducers. Allows local range, zero and full scale adjustments and provides power to the transducer. The module operates one Convectron Gauge or one Capacitance Manometer Gauge (such as the MKS 220B, 626B, 622B Baratrons). When a six channel process control module is installed, the capacitance manometer can be used to control the two channels associated with display line "B", channels 5 and 6. The associated "A" Convectron gauge controls channels 3 and 4.

Condition: New



Product Number: P104907



Price: $826.00



 product photo

Granville Phillips Linear Analog Output Module for GP 307 Vacuum Gauge Controller PN 307100


This is a NEW Granville Phillips Linear Analog Output Module and provides three, zero to +10 Vdc, linearized voltages that correspond to the displayed pressure readings of the 307 Vacuum Gauge Controller. The source for these outputs is the digital data on the controller's internal bus to the Display Module. The analog output resolution is therefore dependent upon this data. The module is intended to be used in a 307 vacuum gauge controller configured with an ion gauge and two thermocouples. The pressure range for the IG linear output is selected by a front panel switch. Four separate ranges are available. For installation, specs and procedures for use, see Chapter 10 of the instruction manual.pdf.

Condition: New



Product Number: P104908



Price: $302.40



 product photo

Granville Phillips Remote Control Input Output Module for GP 307 Vacuum Gauge Controller PN 307012


This is a NEW Remote Input Output Modue and provides Ion Gauge (IG) status outputs, remote filament on/off, degas on/off, front panel lockout capability, and fault or degas status indication relay. For installation of this user installed module see page 19 and for user instructions see page 27-29 of the 307 Vacuum Controller Instruction Manual.pdf below.

Condition: New



Product Number: P104909



Price: $152.46



 product photo

Granville Phillips 307 RS-232 Computer Inferface board for GP 307 Vacuum Gauge Controller, PN 307019


This is a NEW RS-232 Computer Inferface Card Module. The RS-232 Interface Module for the 307 Vacuum Gauge Controller allows data output to, and ion gauge control by, a host computer. Output is either by a command-response mechanism or by a talk-only mode which is invoked via a switch on the RS-232 board. A variety of baud rates and byte framing options are available, as well as switches to force the handshake lines to an “always true” condition. See Chapter 6 of .pdf manual for instructions on use.

Condition: New



Product Number: P104900



Price: $560.70



 product photo

Granville Phillips 307 Controller, Hardware, Power Supply Cable, Plate for Side by Side 19 in Rack


This is the Power Cable and a side by side plate and hardware ONLY for mounting the Power Supply and Control Unit Side by Side, GP 307 Controller, Cables and Accessories sold separately on this website.

Condition: New



Product Number: P104911



Price: $189.00



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com