× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Ideal Electromag Valve

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters, Traps, and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
 product photo

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Power Cable, 1-Phase 115 VAC, 210685


These Ebara EV-A03 and EV-A06 power cables are designed for 1-Phase 115 VAC having NEMA 5/15 to Ebara Nanaboshi NET 243-PF connector. Each of these power cables are 6 foot (2 meters) long.

Condition: New



Product Number: P104875



Price: $151.80



 product photo

Ebara Remote Controller for EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pumps, PN: C-5150-011-7600


This is the Ebara Remote Controller for EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pumps. The Ebara remote controller is an optional accessory for the Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pumps. The remote controller connects to CN2 pump side receptacle (far right picture above).

Condition: New



Product Number: P106110



Price: $455.60



 product photo

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Power Cable, 1-Phase 208-240 VAC, 210687-006


These Ebara power cable cord assemblies are designed for 1-Phase 208 to 240 VAC power and fit the Ebara EV-A03-2 and EV-A06-2 model dry multi-Root's vacuum pumps. These power cables are 6 foot long (2 meters), have 14/3 conductor, and are open-ended (flying lead) design. These Ebara cables include the Nanaboshi NET 243-PF connector that attaches on the vacuum pump side and have Ebara Technologies part number 210687-006.

Condition: New



Product Number: P106009



Price: $218.40



 product photo

Ebara Power Cable AGW14 for EV-A03/A06 Dry Rotary Lobe Vacuum Pumps, 1-Phase 115VAC, 210686-006


These Ebara power cable cord assemblies are designed for 1-Phase 115 VAC power and fit the Ebara EV-A03-1 and EV-A06-1 model dry multi-Root's vacuum pumps. These power cables are 6 foot long (2 meters), have 14/3 conductor, and are open-ended (flying lead) design. These Ebara cables include the Nanaboshi NET 243-PF connector that attaches on the vacuum pump side and have Ebara Technologies part number 210686-006.

Condition: New



Product Number: P106097



Price: $214.61



 product photo

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Power Cable, 3-Phase 208-240 VAC, 210688-006


These Ebara power cable assemblies are 6 foot long (2 meters), 14/4 conductor, and are open-ended design for three phase models EV-A03-3 and EV-A06-3. These power cable cords are 6 foot (2 meters) long and have Ebara part number 210688-006.

Condition: New



Product Number: P106010



Price: $225.60



 product photo

Ebara EV-A10 Dry Rotary Lobe Vacuum Pump Power Cable, 1-Phase 208 to 240 VAC, 914407


These Ebara EV-A10 power cables are designed for the 1-Phase 208 to 240 VAC vacuum pumps. These power cords have 14/3 conductor and are 6 Foot (2 meters) long. They have Ebara Technologies part number 914407.

Condition: New



Product Number: P106007



Price: $151.80



 product photo

Ebara EV-A10 and EV-SA20 Dry Rotary Lobe Vacuum Pump Power Cable, 3-Phase 208-240 VAC, 210516


These Ebara EV-A10 and EV-SA20 power cables are designed to work with the 3-Phase 208 to 240 VAC Ebara EV-A10 and EV-AS20 dry multi-Root's vacuum pumps. These power cord assemblies are 6 foot long (2 meters) with 14/4 conductor. They are open-ended for connection to 3-Phase power and fit Ebara models EV-A10-3 and EV-A20-3. They have Ebara Technologies part number 210516.

Condition: New



Product Number: P106008



Price: $139.95



 product photo

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Wheel, Clear Blue, Threaded Stem with brake


These light-duty wheels fit the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps and are translucent clear blue color with 3/8-16 threaded stem and locking brake. These wheels are as a pack of 4 each.

Condition: New



Product Number: P105994



Price: $125.00



 product photo

Ebara EV-A03 Dry Rotary Lobe Vacuum Pump Caster Wheels and Height Adjusters, 4 each, C-1500-006-9000


These light-duty caster wheels and height adjusters fit the Ebara EV-A03 dry rotary lobe vacuum pumps. They come with all the nuts and washers to install. 4 each of caster wheels and height adjusters. They have Ebara part number C-1500-006-9000

Condition: New



Product Number: P106112



Price: $165.00



 product photo

Ebara EV-A06 Dry Rotary Lobe Vacuum Pump Caster Wheels and Height Adjusters, 4 each, C-1500-006-9100


These light-duty caster wheels and height adjusters fit the Ebara EV-A06 dry rotary lobe vacuum pumps. They come with all the nuts and washers to install. 4 each of caster wheels and height adjusters. They have Ebara part number C-1500-006-9100

Condition: New



Product Number: P106113



Price: $165.00



 product photo

Ebara EV-A03 Dry Rotary Lobe Vacuum Pump Solvent Vapor Trap Kit, Intake Catch Pot For Liquids, KF-25


These Ebara solvent traps are designed for the EV-A03 dry rotary lobe vacuum pumps. These catch-pot traps are used to collect liquids that are present in the vacuum line and help prevent them from entering into the vacuum pump. This kit includes the solvent trap and KF-25 vacuum fittings need to install this solvent trap onto an EV-A03 pumps (see photographs above). The solvent trap includes a manual drain valve with NPT pipe thread fittings. The solvent trap has Ebara Technologies part number C-3080-003-3200 (FT-119).

Condition: New



Product Number: P106006



Price: $995.00



 product photo

Ebara EV-A06 Dry Rotary Lobe Vacuum Pump Solvent Vapor Trap Kit, Intake Catch Pot For Liquids, KF-40


These Ebara solvent traps are designed for the EV-A06 dry rotary lobe vacuum pumps. These catch-pot traps are used to collect liquids that are present in the vacuum line and help prevent them from entering into the vacuum pump. This kit includes the solvent trap and KF-40 vacuum fittings need to install this solvent trap onto an EV-A06 pumps (see photographs above). The solvent trap includes a quality sight glass for visual inspection and a manual drain valve with NPT pipe thread fittings. The solvent trap has Ebara Technologies part number C-3080-003-3100 (FT-118).

Condition: New



Product Number: P106005



Price: $1,195.00



 product photo

Ebara EV-A03 Air Gas Ballast Adapter, Counter Measures Against Moisture Vapor, Air Admittance


These gas ballast adapters are designed for air admittance use with the Ebara EV-A03 dry vacuum pumps. These adapters are to be used for ballast air introduction to combat moisture vapor. Air or nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These air gas ballast adapters for the Ebara EV-A03 pumps have Ebara part number C-2200-002-7000.

Condition: New



Product Number: P103981



Price: $330.00



 product photo

Ebara EV-A03 Nitrogen N2 Introduction Adapter, Counter Measures Against Flammable Solvent Vapors


These gas ballast adapters are designed for nitrogen N2 admittance use with the Ebara EV-A03 dry vacuum pumps. These adapters are to be used for ballast nitrogen introduction to combat against flammable solvent vapors. Nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These nitrogen N2 gas ballast adapters for the Ebara EV-A03 pumps have Ebara part number C-2200-002-7200.

Condition: New



Product Number: P105993



Price: $330.00



 product photo

Ebara EV-A06 Air Gas Ballast Adapter, Counter Measures Against Moisture Vapor, Air Admittance


These gas ballast adapters are designed for air admittance use with the Ebara EV-A06 dry vacuum pumps. These adapters are to be used for ballast air introduction to combat moisture vapor. Air or nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These air gas ballast adapters for the Ebara EV-A06 pumps have Ebara part number C-2200-002-7100.

Condition: New



Product Number: P105991



Price: $330.00



 product photo

Ebara EV-A06 Nitrogen N2 Introduction Adapter, Counter Measures Against Flammable Solvent Vapors


These gas ballast adapters are designed for nitrogen N2 admittance use with the Ebara EV-A06 dry vacuum pumps. These adapters are to be used for ballast nitrogen introduction to combat against flammable solvent vapors. Nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These nitrogen N2 gas ballast adapters for the Ebara EV-A06 pumps have Ebara part number C-2200-002-7300.

Condition: New



Product Number: P105992



Price: $330.00



 product photo

Ebara EV-A Star Levelers, 3/8-16 threads, 1.25 Inch Swivel Pad, Fits Ebara EV-A 03 & EV-A06 Pumps


Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 1.25 diameter by 3/8-16 inch threads by 2.88 inch length. Each leveler has a 375 pound max load capacity and 15 degree swivel style leveling pads. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Condition: New



Product Number: P104079



Price: $32.95



 product photo

Ebara EV-A Star Levelers, 3/8-16 threads, 1.38 In. Stationary Pad, Fits Ebara EV-A 03 & EV-A06 Pumps


Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 1.38 diameter pad with by 3/8-16 inch threads by 2.19 inch length. Each leveler has a 300 pound max load capacity. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Condition: New



Product Number: P104082



Price: $27.95



 product photo

Ebara EV-A Star Levelers, 3/8-16 threads, 2.00 In. Stationary Pad, Fits Ebara EV-A 03 & EV-A06 Pumps


Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 2.00 diameter Nylon pad with by 3/8-16 inch threads by 2.70 inch length. Each leveler has a 300 pound max load capacity. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Condition: New



Product Number: P104080



Price: $38.21



 product photo

Ebara EV-A Star Levelers, 3/8-16 threads, 2.00 In. Stationary Pad, Fits Ebara EV-A 03 & EV-A06 Pumps


Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 2.00 diameter Elastomer pad with by 3/8-16 inch threads by 2.70 inch length. Each leveler has a 300 pound max load capacity. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Condition: New



Product Number: P104081



Price: $38.25



 product photo

Ebara EV-A Rubber Vibration Feet, 1.56 Diameter, 3/8-16 Threads, 1.63 Inch Long, 125 Lbs Max Load


These natural rubber vibration feet are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when setting the pump on floor or level operating platform. These rubber feet have 1.56 diameter with by 3/8-16 inch threads by 1.63 inch length. Each mount is designed to support has a 125 pound max load capacity with a 20 lbs shear load rating. They are designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Condition: New



Product Number: P105995



Price: $16.80



 product photo

Ebara EV-A Rubber Vibration Mounts, 1.56 Diameter, 3/8-16 Threads, 1.63 Inch Long, 125 Lbs Max Load


These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 1.56 diameter with by 3/8-16 inch threads by 2.25 inch length. Each mount is designed to support has a 125 pound max load capacity with a 20 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Condition: New



Product Number: P104083



Price: $26.89



 product photo

Ebara EV-A Rubber Vibration Mounts, 2.00 Diameter, 3/8-16 Threads, 1.63 Inch Long, 125 Lbs Max Load


These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 2.00 diameter with by 3/8-16 inch threads by 2.25 inch length. Each mount is designed to support has a 125 pound max load capacity with a 55 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Condition: New



Product Number: P104084



Price: $29.98



 product photo

Ebara EV-A Rubber Vibration Mounts, 2.00 Diameter, 3/8-16 Threads, 1.63 Inch Long, 165 Lbs Max Load


These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 2.00 diameter with by 3/8-16 inch threads by 1.63 inch depth. Each mount is designed to support has a 165 pound max load capacity with a 55 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Condition: New



Product Number: P104085



Price: $36.95



 product photo

Ebara EV-A Vibration Mount, 3/8-16 threads, Durometer Neoprene Mount, fits EV-A03 and EV-A06


These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 3/8-16 inch threads. Each mount is designed to support has a 130 pound max load capacity with a 35 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Condition: New



Product Number: P104086



Price: $34.95



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com