Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-nl
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Adixen 2021C2 Pumps On Sale Agilent TriScroll Pumps On Sale Edwards nEXT300D TStations On Sale Agilent Varian Helium Leak Detectors On Sale Edwards nXR Multi Stage Roots Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Adapter KF-40 to ASA 4.5 / ANSI 1 Vacuum Fitting with O-Ring Groove, Stainless Steel
In Stock
15


Adapter KF-40 to ASA 4.5 /ANSI 1 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-40 to ASA 4.5 (ANSI 1) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-40) stub welded to an ASA 4.5 /ANSI 1 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.65" (42mm) B = 1.49" (38mm) C = 4.2" (108mm) O-Ring Groove (ID) =1.88" (47.5) mm ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P109006



Price: €247.73




Currency: Euro (Euro)

Adapter KF-40 to ASA 5.0 /ANSI 1.5 Vacuum Fitting with O-Ring Groove, Stainless Steel
Out of Stock
Expecting 1
Anticipated Arrival 1 on 2025-01-02


Adapter KF-40 to ASA 5.0 /ANSI 1.5 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-40 to ASA 5.0 (ANSI 1.5) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-40) stub welded to an ASA 5.0 /ANSI 1.5 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.81" (46mm) B = 1.33" (34mm) C = 5.00" (127mm) O-Ring Groove (ID) =2.66" ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P101297



Price: €362.35




Currency: Euro (Euro)

Adapter KF-40 to ASA 6.0 /ANSI 2 Vacuum Fitting with O-Ring Groove, Stainless Steel
Out of Stock


Adapter KF-40 to ASA 7.5 /ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-40 to ASA 6.0 (ANSI 2) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-40) stub welded to an ASA 6.0 /ANSI 2 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.81" (46mm) B = 1.33" (34mm) C = 6.00" (152mm) O-Ring Groove (ID) =3.42" ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P101298



Price: €547.75




Currency: Euro (Euro)

Adapter KF-40 to ASA 7.5 /ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel
Out of Stock
Expecting 1
Anticipated Arrival 1 on 2025-04-16


Adapter KF-40 to ASA 7.5 /ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF40 to ASA 7.5 (ANSI 3) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-40) stub welded to an ASA 7.5 /ANSI 3 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.81" (46mm) B = 1.33" (34mm) C = C = 7.5" (191mm) O-Ring Groove (ID) =4.69" ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P101299



Price: €1,223.52




Currency: Euro (Euro)

Adapter KF-50 to ASA 4.25 / ANSI 1 Vacuum Fitting with O-Ring Groove, Stainless Steel
In Stock
14


Adapter KF-50 to ASA 4.25 / ANSI 1 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-50 to ASA 4.25 (ANSI 1) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-50) stub welded to an ASA 4.25 / ANSI 1 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.65" (42mm) B = 2.00" (51mm) C = 4.2" (108mm) O-Ring Groove (ID) =1.88" (47.5) mm ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P109007



Price: €220.08




Currency: Euro (Euro)

Adapter KF-50 to ASA 5.0 /ANSI 1.5 Vacuum Fitting with O-Ring Groove, Stainless Steel
In Stock
2


Adapter KF-50 to ASA 5.0 /ANSI 1.5 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-50 to ASA 5.0 (ANSI 1.5) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-50) stub welded to an ASA 5.0 /ANSI 1.5 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.81" (46mm) B = 1.83" (46mm) C = 5.00" (127mm) O-Ring Groove (ID) =2.66" ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P101300



Price: €272.40




Currency: Euro (Euro)

Adapter KF-50 to ASA 6.0 /ANSI 2 Vacuum Fitting with O-Ring Groove, Stainless Steel
Out of Stock


Adapter KF-50 to ASA 7.5 /ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-50 to ASA 6.0 (ANSI 2) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-50) stub welded to an ASA 6.0 /ANSI 2 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.81" (46mm) B = 1.83" (46mm) C = 6.00" (152mm) O-Ring Groove (ID) =3.42" ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P101301



Price: €373.44




Currency: Euro (Euro)

Adapter KF-50 to ASA 7.5 /ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel
In Stock
3


Adapter KF-50 to ASA 7.5 /ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF50 to ASA 7.5 (ANSI 3) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-50) stub welded to an ASA 7.5 /ANSI 3 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.81" (46mm) B = 1.83" (46mm) C = C = 7.5" (191mm) O-Ring Groove (ID) =4.69" ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P101302



Price: €1,017.63




Currency: Euro (Euro)

Adapter KF-50 to ASA 7.5 / ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel
In Stock
2


Adapter KF-50 to ASA 7.5, ANSI 3 Vacuum Fitting with O-Ring Groove, Stainless Steel. These adapters are KF-50 to ASA 7.5 (ANSI 3) with an O-Ring groove. They allow a KF fitting to be connected to an ASA/ANSI fitting. These adapters have an ISO-KF quick flange (NW-50) stub welded to an ASA 7.5, ANSI 3 bored flange. The ASA/ANSI side has an O-ring groove. These adapters are made of 304 stainless steel. KF connections join two similar sized flanges with a centering ring and surrounding O-ring in between. A hinged clamp fastens the KF joint. ASA/ANSI connections always mate an O-ring grooved flange with a smooth (non-grooved) flange. The seal is made with an O-ring and the flanges are fastened with through-hole bolts, nuts, and washers. Dimensions: A = 1.87 in. (47.5 mm)B = 1.583 in. (40 mm) C = 7.5 in. (190.5)O-Ring Groove (ID) = 4.63 in. (117.6) ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr.

Condition: New



Part Number: P105220



Price: €1,574.35




Currency: Euro (Euro)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com