× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Helium Leak Detectors On Sale New Scroll Pumps Agilent Helium Leak Detectors on Sale Ideal Vacuum Command Valves Turbo Pumps on Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Dry Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters Traps and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
 product photo

Edwards TAV5 Vent Valve for EXT Turbo Pumps, 24V DC 1/8 BSP, 1.8 Watt Max., PN: B58066010


The Edwards TAV5 vent-valve is 24 V DC solenoid operated valve which can be use to vent your Edwards Turbo EXT or nEXT vacuum system with atmospheric air or dry nitrogen when you switch off the Turbo pump. The valves are supplied with a sintered bronze inlet-filter, a riffled hose connector, 3m of electrical cable and a DN10NW adapter. The valve can be driven by the Podule attached to the Edwards EXT 75DX Turbo Pump, a TIC controller, EXC controller, the drive electronics connector on the side of nEXT pumps, or any suitable 24VDC power supply. You can either use your TAV5 vent-valve to replace the manual vent-valve supplied with the EXT 75 DX pump or nEXT series pumps, or adapt it to fit any other suitable port on the vacuum system upstream of the turbomolecular pump. This is the TAV5 vent valve only, EXT and nEXT turbo pumps sold separately. For application use and install instructions see Accessory Manual PDF below.

Condition: New



Product Number: P105358



Price: $645.00



 product photo

Edwards TAV6 Vent Valve for EXT or nEXT Turbo Pumps, 24V DC 1/8 BSP, 1.8 Watt Max., PN: B58066020


The Edwards TAV6 vent-valve is 24 V DC solenoid operated valve which can be use to vent your Edwards Turbo EXT or nEXT vacuum system with atmospheric air or dry nitrogen when you switch off the Turbo pump. The valves are supplied with a sintered bronze inlet-filter, a riffled hose connector, 3m of electrical cable and a DN10NW adapter. The valve can be driven by the Podule attached to the Edwards EXT 75DX Turbo Pump, a TIC controller, EXC controller, the drive electronics connector on the side of nEXT pumps, or any suitable 24VDC power supply. You can either use your TAV6 vent-valve to replace the manual vent-valve supplied with the EXT 75 DX pump or nEXT series pumps, or adapt it to fit any other suitable port on the vacuum system upstream of the turbomolecular pump. This is the TAV6 vent valve only, EXT and nEXT turbo pumps sold separately. For application use and install instructions see Accessory Manual PDF below.

Condition: New



Product Number: P106355



Price: $487.00



 product photo

Edwards Vent Port Adapter for nEXT 240, 300, 400 Turbo Pumps, PN: B58066011


The Edwards 1/8 inch BSP(P) male to KF10 NW10 vent-port adapter can be used to convert the 1/8 inch BSP(P) female vent-port on all nEXT pumps to a KF10 NW10 flange. An alternative vent-valve to the TAV5/TAV6 or a vent pipeline may then be fitted to this flange. The vent-port adapter is supplied with a removable flow restrictor and an O-ring to seal the adapter to the pump. Can be used on all nEXT and EXT Edwards Turbo pumps. For application use and install instructions see Accessory Manual PDF below.

Condition: New



Product Number: P106356



Price: $75.00



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com