× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Helium Leak Detectors on Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Dry Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters Traps and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
 product photo

Conflat Flange Bakeout ThinBand Nozzle Heater, for CF 2.75 inch Flange


These conflat 2.75 (2-3/4) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 2.75-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power. and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 C. (maximum bakeout temperature can be limited by the choice of gasket material).

Condition: New



Product Number: P107360



Price: $107.00



 product photo

Conflat Flange Bakeout ThinBand Nozzle Heater, for CF 3.375 inch Flange


These conflat 3.375 (3-3/8) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 3.375-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 C. (maximum bakeout temperature can be limited by the choice of gasket material).

Condition: New



Product Number: P108433



Price: $107.00



 product photo

Conflat Flange Bakeout ThinBand Nozzle Heater, for CF 4.5 inch Flange


These conflat 4.5 (4-1/2) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 4.5-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 C. (maximum bakeout temperature can be limited by the choice of gasket material).

Condition: New



Product Number: P108434



Price: $115.00



 product photo

Conflat Flange Bakeout ThinBand Nozzle Heater, for CF 4.625 inch Flange


These conflat 4.625 (4-5/8) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 4.625-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 C. (maximum bakeout temperature can be limited by the choice of gasket material).

Condition: New



Product Number: P108435



Price: $115.00



 product photo

Conflat Vacuum Fittings Bakeout Surface Mount K-Type Thermocouple, Response Times < 0.15 Seconds


These self-adhering mount K-Type thermocouples provide a rapid response (less than 0.15 seconds) and can be operated up to temperatures of 260C (500F) or can be cemented in place for use at temperatures up to 315C (600F). They use a polyimide and fiberglass junction insulation along with a fiberglass-insulated lead wire and require a patch length 1" by 0.375" width. It is important that they thermocouple be securely connected to the part being heated at all times so that good thermal contact in achieved turning the complete bakeout cycle. Caution, if the thermocouple loses contact with the fitting the temperature controller will measure a much lower temperature of the room air. This will result in a dangerously high run away heating of the vacuum-flanged fitting. We recommend that these thermocouples be directly adhered to the outer surface of the flange with the band nozzle heater installed over the thermocouple. This procedure will clamp the thermocouple onto the heated conflat flange.

Condition: New



Product Number: P107362



Price: $49.95



 product photo

Max-Bakeout Conflat Bakeout Single-Zone Tempurature Controller PID, 8 Amp Solid-State, 960 Watts


Our Max-Bakeout temperature controllers are designed to control the temperature of our conflat flange band heaters. They are single-zone temperature controller PID solutions which can provide up to 8-Amp solid-state at 960 Watt output. These Max-Bakeout temperature controllers have rear connections for the heaters and a type K Thermocouple (sold separately) to measure the fitting temperature in real-time. These controllers require standard 120 VAC input power, front on-off switch, with PID control features to accurate control the desired temperature.

Condition: New



Product Number: P107361



Price: $950.00



 product photo

Conflat Flange Bakeout ThinBand Nozzle Heater, for CF 1.33 inch Flange


These conflat 1.33 (1-1/3) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 1.33-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 C. (maximum bakeout temperature can be limited by the choice of gasket material).

Condition: New



Product Number: P108429



Price: $107.00



 product photo

Conflat Flange Bakeout ThinBand Nozzle Heater, for CF 2.125 inch Flange


These conflat 2.125 (2-1/8) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 2.125-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 C. (maximum bakeout temperature can be limited by the choice of gasket material).

Condition: New



Product Number: P108432



Price: $107.00



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com