× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Helium Leak Detectors on Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Dry Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters Traps and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
 product photo

IVP Bulkhead U-Clamp, KF-16 Vacuum Fittings, ISO-KF Flange Size NW-16, Aluminum


These Bulkhead U-Clamps are locally made here in the USA at Ideal Vacuum Products. They are especially good for our USA made Ideal Vacuum Cube Chambers and other holed bulkhead chambers as well. These unique U-Clamps allow fast and efficient one-handed installation with a minimum of fasteners, particularly in crowded assemblies (see middle graphic above). The collared yoke design permits stable, "drop-free" draping of the fitting over a connection, while screws are inserted. Typically, two-piece bulkhead clamps have thinner bodies which cause levering of the clamp half when screws are placed and hand tightened; this causes inconsistent pressure along the seal when the fitting is fully tightened. The improved, thicker body of our clamps eliminates this levering action, which means better seals with fewer parts, in less time.

Condition: New



Product Number: P108101



Price: $23.00



 product photo

IVP Bulkhead U-Clamp, Flange KF-25 Vacuum Fittings, ISO-KF Flange Size NW-25, Aluminum


These Bulkhead U-Clamps are locally made here in the USA at Ideal Vacuum Products. They are especially good for our USA made Ideal Vacuum Cube Chambers and other holed bulkhead chambers as well. These unique U-Clamps allow fast and efficient one-handed installation with a minimum of fasteners, particularly in crowded assemblies (see middle graphic above). The collared yoke design permits stable, "drop-free" draping of the fitting over a connection, while screws are inserted. Typically, two-piece bulkhead clamps have thinner bodies which cause levering of the clamp half when screws are placed and hand tightened; this causes inconsistent pressure along the seal when the fitting is fully tightened. The improved, thicker body of our clamps eliminates this levering action, which means better seals with fewer parts, in less time.

Condition: New



Product Number: P108102



Price: $27.00



 product photo

IVP Bulkhead U-Clamp, Flange KF-40 Vacuum Fittings, ISO-KF Flange Size NW-40, Aluminum


These Bulkhead U-Clamps are locally made here in the USA at Ideal Vacuum Products. They are especially good for our USA made Ideal Vacuum Cube Chambers and other holed bulkhead chambers as well. These unique U-Clamps allow fast and efficient one-handed installation with a minimum of fasteners, particularly in crowded assemblies (see middle graphic above). The collared yoke design permits stable, "drop-free" draping of the fitting over a connection, while screws are inserted. Typically, two-piece bulkhead clamps have thinner bodies which cause levering of the clamp half when screws are placed and hand tightened; this causes inconsistent pressure along the seal when the fitting is fully tightened. The improved, thicker body of our clamps eliminates this levering action, which means better seals with fewer parts, in less time.

Condition: New



Product Number: P108103



Price: $29.00



 product photo

IVP Bulkhead U-Clamp, Flange KF-50 Vacuum Fittings, ISO-KF Flange Size NW-50, Aluminum


These Bulkhead U-Clamps are locally made here in the USA at Ideal Vacuum Products. They are especially good for our USA made Ideal Vacuum Cube Chambers and other holed bulkhead chambers as well. These unique U-Clamps allow fast and efficient one-handed installation with a minimum of fasteners, particularly in crowded assemblies (see middle graphic above). The collared yoke design permits stable, "drop-free" draping of the fitting over a connection, while screws are inserted. Typically, two-piece bulkhead clamps have thinner bodies which cause levering of the clamp half when screws are placed and hand tightened; this causes inconsistent pressure along the seal when the fitting is fully tightened. The improved, thicker body of our clamps eliminates this levering action, which means better seals with fewer parts, in less time.

Condition: New



Product Number: P108104



Price: $34.00



 product photo

Bulkhead Clamp, Flange KF-16 Vacuum Fittings, ISO-KF Flange Size NW-16, Aluminum


These Aluminum KF-16 Bulkhead Clamps are commonly used to build foreline vacuum plumbing and process systems. Adapts to a baseplate or fixed flange. Uses standard KF seal assembly. Comes with 6 stainless steel 10-32 X 5/8 inch bolts and 6 washers. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of ALUMINUM.

Condition: New



Product Number: P104598



Price: $25.00



 product photo

Bulkhead Clamp, Flange KF-25 Vacuum Fittings, ISO-KF Flange Size NW-25, Aluminum


These Aluminum KF-25 Bulkhead Clamps are commonly used to build foreline vacuum plumbing and process systems. Adapts to a baseplate or fixed flange. Uses standard KF seal assembly. Comes with 6 stainless steel 10-32 X 5/8 inch bolts and 6 washers. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of ALUMINUM.

Condition: New



Product Number: P104599



Price: $29.00



 product photo

Bulkhead Clamp, Flange KF-40 Vacuum Fittings, ISO-KF Flange Size NW-40, Aluminum


These Aluminum KF-40 Bulkhead Clamps are commonly used to build foreline vacuum plumbing and process systems. Adapts to a baseplate or fixed flange. Uses standard KF seal assembly. Comes with 6 stainless steel 10-32 X 5/8 inch bolts and 6 washers. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of ALUMINUM.

Condition: New



Product Number: P104600



Price: $31.00



 product photo

Bulkhead Clamp, Flange KF-50 Vacuum Fittings, ISO-KF Flange Size NW-50, Aluminum


These Aluminum KF-50 Bulkhead Clamps are commonly used to build foreline vacuum plumbing and process systems. Adapts to a baseplate or fixed flange. Uses standard KF seal assembly. Comes with 8 stainless steel 10-32 X 5/8 inch bolts and 8 washers. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of ALUMINUM.

Condition: New



Product Number: P104601



Price: $36.00



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com