× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Ideal Electromag Valve

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters, Traps, and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
Product Image 1
Product Image 2
Product Image 3
gn="justify"> The 125A Compressor is designed expressly for a long usable life, very reliable, and is very easy to use. The 125A compressor provides outstanding performance with most Cryo-Torr Cryopumps. The 125A requires no maintenance beyond a recommended adsorber change once every year. The unit is fully compatible with new and existing CTI-Cryogenics pumping systems. This is a low voltage model, 1 phase and runs on 208-230 VAC and is air cooled. A power cable is not included but the .pdf instructs one how to prepare an input power cable. This unit is used. A Users Manual is provided by downloading the .pdf. below.

Can be used with the the following Cryo-Pumps CP 8, CP8LP, CT 8

4100

Condition:

  Rebuilt

Part Number:

  P108070

Warranty:

  1-Year Limited Warranty

Availability:

  1





$4,100.00


Print Version

Austin Scientific 125A Cryo-Pump Compressor, Rebuilt


Austin Scientific 125A Cryo-Pump Compressor, Rebuilt

The 125A Compressor is designed expressly for a long usable life, very reliable, and is very easy to use. The 125A compressor provides outstanding performance with most Cryo-Torr Cryopumps. The 125A requires no maintenance beyond a recommended adsorber change once every year. The unit is fully compatible with new and existing CTI-Cryogenics pumping systems. This is a low voltage model, 1 phase and runs on 208-230 VAC and is air cooled. A power cable is not included but the .pdf instructs one how to prepare an input power cable. This unit is used. A Users Manual is provided by downloading the .pdf. below.

Can be used with the the following Cryo-Pumps
  • CP 8, CP8LP, CT 8



  • We also Repair and Rebuild Cryogenic Vacuum Pumps and Systems
    For Services: CALL (505) 872-0037

    Every CTI-Cryogenics pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. As each pump is rebuilt they are fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. All sensors are tested and the final rebuilt CTI-Cryogenics is cleaned and painted as required. We offer rebuild subfab services to rebuild you CTI-Cryogenics. Please call our office at (505) 872-0037 for more information about our subfab rebuild service.






You may wish to consider the following products:

Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com

Press ESC to Close



Press ESC to Close