× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Ideal Electromag Valve

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters, Traps, and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
Product Image 1
Product Image 2
Product Image 3
gn="justify"> The 9600 Compressor is designed expressly for a long usable life, very reliable, and is very easy to use. The 9600 compressor provides outstanding performance with all Cryo-Torr Cryopumps, On-Board Cryopumps, On-Board Waterpumps, and On-Board TurboPlus Vacuum Pumps. It is a lightweight design, with large casters for easy handling, and its power, helium, and water hookups are all easily accessible for fast installation. The 9600 requires no maintenance beyond a recommended adsorber change once every three years. Circuit protection is provided by a single row of breakers which are easily accessible at the rear panel. The adsorber is easy to reach with the simple removal of a single side panel, and is designed for instant removal and 7250

Condition:

  Rebuilt

Part Number:

  P104456

Warranty:

  1-Year Limited Warranty

Call for Availability

  





$7,250.00


Print Version

CTI-Cryogenics by Helix, Cryo-Torr Cryopump 9600 Helium Compressor, Rebuilt


CTI-Cryogenics by Helix, Cryo-Torr Cryopump 9600 Helium Compressor, Rebuilt

The 9600 Compressor is designed expressly for a long usable life, very reliable, and is very easy to use. The 9600 compressor provides outstanding performance with all Cryo-Torr Cryopumps, On-Board Cryopumps, On-Board Waterpumps, and On-Board TurboPlus Vacuum Pumps. It is a lightweight design, with large casters for easy handling, and its power, helium, and water hookups are all easily accessible for fast installation. The 9600 requires no maintenance beyond a recommended adsorber change once every three years. Circuit protection is provided by a single row of breakers which are easily accessible at the rear panel. The adsorber is easy to reach with the simple removal of a single side panel, and is designed for instant removal and replacement. Remote controls are supported, giving you the flexibility of remote compressor location (but not included). Has extreme high capacity and efficient design for improved pump performance and fast regenerations. The unit is fully compatible with new and existing CTI-Cryogenics pumping systems. This is a low voltage model, 3 phase and runs on 180-253 VAC. A power cable is provided but helium return lines are not included. The unit is used, but in excellent condition and comes with a 90 day parts and labor warranty. A Users Manual is provided by downloading the .pdf. below.

Can be used with the the following Cryo-Pumps
  • Cryo-Torr 100, 7, 8, 8F, 10





We also Repair and Rebuild Cryogenic Vacuum Pumps and Systems
For Services: CALL (505) 872-0037

Every CTI-Cryogenics pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. As each pump is rebuilt they are fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. All sensors are tested and the final rebuilt CTI-Cryogenics is cleaned and painted as required. We offer rebuild subfab services to rebuild you CTI-Cryogenics. Please call our office at (505) 872-0037 for more information about our subfab rebuild service.




You may wish to consider the following products:

Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com

Press ESC to Close



Press ESC to Close