× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Ideal Vacuum Cube Alcatel Turbo Pump Ideal Xactgauge Pressure Gauge Ideal Electromag Valve

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Cryopumps and Chillers Diffusion Vacuum Pumps Dry Diaphragm Vacuum Pumps Dry Rotary Lobe Vacuum Pumps Dry Screw And Piston Pumps Dry Scroll Vacuum Pumps Dry Semiconductor Vacuum Pumps Filters, Traps, and Silencers Fittings and Flanges Helium Leak Detectors Ion Pumps Oils, Hose, and Grease Rebuild Kits, Parts, And Motors Roots Blower Vacuum Pumps Rotary Piston Vacuum Pumps Rotary Vane Vacuum Pumps Turbo Pumps And Controllers Vacuum Chambers and Ovens Vacuum Pressure And Control Vacuum Valves Valves
Product Image 1
Product Image 2
Product Image 3
lign="justify">The new compact EPX180 high vacuum dry pump offers enhanced performance with reduced cost of ownership. Using a unique patent protected mechanism the EPX180 is capable of pumping from atmosphere to ultimate pressures of <7 x 10-5 Torr. These are truly amazing pumps; the Edwards EPX pump can pump down from atmosphere to the turbo molecular pressure range and can operate continuously at all inlet pressures. Based on the successful award winning IPX range, the modular EPX180 offers outstanding performance in a package that is 20% lighter, 30% smaller and requires 40% less power than the IPX. The EPX NE series of pumps has an End User Controller (EUC). The End User Controller enables local control for stand-alone use as well as the ability to 28299

Condition:

  New

Part Number:

  P102979

Warranty:

  Full Manufacturer's Warranty

Call for Availability

  





$28,299.00


Print Version

NEW Edwards EPX 180NE EPX180NE All-In-One Atmosphere-To-HiVac Dry Vacuum Pump PN A41944012


NEW Edwards EPX 180NE EPX180NE All-In-One Atmosphere-To-HiVac Dry Vacuum Pump PN A41944012

The new compact EPX180 high vacuum dry pump offers enhanced performance with reduced cost of ownership. Using a unique patent protected mechanism the EPX180 is capable of pumping from atmosphere to ultimate pressures of <7 x 10-5 Torr. These are truly amazing pumps; the Edwards EPX pump can pump down from atmosphere to the turbo molecular pressure range and can operate continuously at all inlet pressures. Based on the successful award winning IPX range, the modular EPX180 offers outstanding performance in a package that is 20% lighter, 30% smaller and requires 40% less power than the IPX. The EPX NE series of pumps has an End User Controller (EUC). The End User Controller enables local control for stand-alone use as well as the ability to connect to a fab-wide network for remote control and monitoring. The EPX pump system operates at pressures between atmospheric and ultimate vacuum, with no lubricating or sealing fluid in the pumping chamber. This ensures a clean pumping system without back-migration of oil or fluid into the system being evacuated.

The stator of the pump and the enclosed motor are cooled by an integrated water cooling circuit. The EPX pump is therefore suitable for applications in cleanroom environments where fan cooling is unacceptable. The cooling water supply and return pipelines are connected to the pump by water connectors (customer specified). Cooling water must commensurate with the environmental conditions (humidity and temperature) such that the dewpoint is not reached. The pump incorporates an EMC supply filter and an inverter drive, which provides and controls the electrical supply to the pump-motor. LEDs on the front cover identify the status of the EPX pump. Motor speed depends on the pressure at the pump inlet. When the pump is started with the inlet pressure at or close to atmospheric pressure, the motor accelerates to a speed which is limited by the current which can be supplied by the inverter drive. As the pressure at the inlet is reduced, the motor speed increases, until it eventually reaches its preset maximum speed. If the pressure at the inlet increases, the motor will slow down again.

The EPX NE series of pumps can be manually operated using the End User Control (EUC) local display and keypad, or remotely using a Pump Display Terminal (PDT), if fitted; it can also be controlled and monitored over the network, which connects to the EPX pump through the Network connector. When the EPX LE series of pumps is controlled via the Tool Interface Module (TIM), the EUC simply monitors the status of the pump. The EPX pump is compatible with Fabworks 32. The EPX pump is supported by four vibration isolators. Pump protection sensors automatically shut down the pump if a fault condition arises. The EPX series covers a broad range of applications from wafer handling through to medium duty processes. The EPX N Series include a gas module that provides Nitrogen purge extending the application range to medium processes in which low levels of corrosive vapors and articulates are expected.

Process Compatibility Applications for EPX 180NE Include:
  • Load Lock

  • Transfer Chamber
  • PVD Sputtering
  • Ashing/PR Strip
  • Dieletric Etch


  • Features and Benefits Include:
  • Compact Footprint Smallest in the industry.
  • Low Cost of Ownership Only 1.4 kW of power.
  • Unique Patent Protected Pumping Mechanism Pump down at atmosphere to turbomolecular base pressure and can operate continuously at all inlet pressures.
  • Ultra Clean Mechanism No grease or oil lubricated bearings exposed to high vacuum that allows no other source of potential contamination.
  • Extremely Reliable Has a MTBFp = 13 years (SEMI E10) with service periods of around every 5 years to maximize the life of the pump.
  • Network Compatible Available with End User Control and can be connected to a fab-wide network for diagnostic monitoring and control.

    Features for this Part No. A41944012 Include:
  • EPX180NE High Vacuum Drypump.

  • No TIM (Tool Interface Module) but available.
  • Water Cooling Hookup 3/8 inch Quick Connect.
  • Gas Module.
  • 208 VAC - 3 phase.




  • PDF Logo Edwards EPX180 and EXP500 HiVac Series Dry Vacuum Pumps.pdf

    PDF Logo Edwards EPX 180 Instruction Manual and Spec Sheet.pdf

    PDF Logo Edwards EPX 500 Instruction Manual and Spec Sheet.pdf

    PDF Logo Edwards EPX 500LE Product Brochure.pdf



    You may wish to consider the following products:

    Ideal Vacuum Logo Water Mark
    CONTACT US
    Ideal Vacuum Products, LLC
    5910 Midway Park Blvd NE,
    Albuquerque, NM 87109-5805

    Phone: (505) 872-0037
    Fax: (505) 872-9001
    info@idealvac.com

    Press ESC to Close



    Press ESC to Close