MKS HPS® Series 317 Convection Enhanced Pirani Sensor KF16 NW16 (PN 103170010SH) (Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller) The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 100 Torr to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this KF16 NW16 flange. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available download in PDF format below.

MKS HPS® Series 317 Convection Enhanced Pirani Sensor KF25 NW25 (PN 103170027SH) (Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller) The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 100 Torr to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this KF25 NW25 flange. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available for download in PDF format below.

MKS HPS® Series 317 Convection Enhanced Pirani Vacuum Sensor features a 0.001 to 1000 Torr, Conflat CF 1.33 in. MKS Part Number: 103170013SH. The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost, Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 0.001 to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this CF 1.33 inch Mini-CF flange fitting. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available for download in PDF format below.

MKS HPS® Series 317 Convection Enhanced Pirani Vacuum Sensor features a 0.001 to 1000 Torr, Conflat CF 2.75 in. MKS Part Number: 103170014SH. The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost, Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 0.001 to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this CF 2.75 Conflat flange. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available for download in PDF format below.

MKS Vacuum Gauge Cable for 345 or 317 Connecting to 937B and 946 Controllers, 10 Ft. (3m) Long. MKS Part Number: 103170006SH. The MKS vacuum gauge signal cable connects 345 or 317 vacuum gauge sensors to 945, 947, 937B, and 946 controllers. It connects to the back of the MKS controllers and to the side of the MKS 345 or 317 Pirani Sensor. This is the Cable ONLY. The Series 947 Convection-Enhanced Pirani Controller offers many standard features and is easy to use. An analog output signal proportional to pressure is standard and is accessible from the rear of the controller, there is where this cable is connected. Processes are controlled with two independent relay set points that are standard on this single-channel controller. The relays can be set to trip anywhere within the controller’s set point range. All of the operating controls are conveniently accessible from the front panel of the controller, including the power on-off switch. Adjust set points from the front panel while viewing the large, easy-to-read display. Set point activation is shown with red LED indicators. Set points can be checked at any time with no break in process control.

MKS Vacuum Gauge Cable for 345 or 317 Connecting to 945, 947, 937B or 946 Controllers, 25 ft. (7.5m) Long. MKS Part Number: 103170007SH. The MKS vacuum gauge signal cable connects 345 or 317 vacuum gauge sensors to 945, 947, 937B, or 946 controllers. It connects to the back of the MKS controllers and to the side of the MKS 345 or 317 Pirani Sensor. This is the Cable ONLY. The Series 947 Convection-Enhanced Pirani Controller offers many standard features and is easy to use. An analog output signal proportional to pressure is standard and is accessible from the rear of the controller, there is where this cable is connected. Processes are controlled with two independent relay set points that are standard on this single-channel controller. The relays can be set to trip anywhere within the controller’s set point range. All of the operating controls are conveniently accessible from the front panel of the controller, including the power on-off switch. Adjust set points from the front panel while viewing the large, easy-to-read display. Set point activation is shown with red LED indicators. Set points can be checked at any time with no break in process control.