Fast Access ISO-F 100 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-F 100 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 100 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 3.5" with an area of 9.6 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. . Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-F flanged windows use single claw clamps, or nuts bolts, and washers along with a centering ring fitted with an O-ring for mounting. Use single claw clamps to mount to an ISO-K flange. Use nuts, bolts, and washers for joining two ISO-F flanges together (smooth bored or one threaded hole flange). See the table below for bolt sets and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-K 100 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-K 100 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 100 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 3.5" with an area of 9.6 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-K flanged doors use either single or double claw clamps along with a centering ring fitted with an O-ring for mounting. Use double claw clamps to mount to other ISO-K flanges. Use single claw clamps to mount to ISO-F flanges with bolt holes (smooth bored or threaded). See the table below for claw clamps and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-F 160 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-F 160 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 160 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 3.5" with an area of 9.6 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. . Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-F flanged windows use single claw clamps, or nuts bolts, and washers along with a centering ring fitted with an O-ring for mounting. Use single claw clamps to mount to an ISO-K flange. Use nuts, bolts, and washers for joining two ISO-F flanges together (smooth bored or one threaded hole flange). See the table below for bolt sets and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-K 160 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-K 160 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 160 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 3.5" with an area of 9.6 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-K flanged doors use either single or double claw clamps along with a centering ring fitted with an O-ring for mounting. Use double claw clamps to mount to other ISO-K flanges. Use single claw clamps to mount to ISO-F flanges with bolt holes (smooth bored or threaded). See the table below for claw clamps and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-F 200 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-F 200 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 200 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 7.8" with an area of 47.8 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. . Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-F flanged windows use single claw clamps, or nuts bolts, and washers along with a centering ring fitted with an O-ring for mounting. Use single claw clamps to mount to an ISO-K flange. Use nuts, bolts, and washers for joining two ISO-F flanges together (smooth bored or one threaded hole flange). See the table below for bolt sets and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-K 200 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-K 200 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 200 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 3.5" with an area of 9.6 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-K flanged doors use either single or double claw clamps along with a centering ring fitted with an O-ring for mounting. Use double claw clamps to mount to other ISO-K flanges. Use single claw clamps to mount to ISO-F flanges with bolt holes (smooth bored or threaded). See the table below for claw clamps and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-F 250 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-F 250 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 250 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 9.6" with an area of 72.4 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-F flanged windows use single claw clamps, or nuts bolts, and washers along with a centering ring fitted with an O-ring for mounting. Use single claw clamps to mount to an ISO-K flange. Use nuts, bolts, and washers for joining two ISO-F flanges together (smooth bored or one threaded hole flange). See the table below for bolt sets and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.

Fast Access ISO-K 250 Blind Entry Door Without Window , Demountable, 3/8 in. Stainless Steel. This Ideal Vacuum Fast Access ISO-K 250 Blind Entry Door (no window) can be mounted to any vacuum chamber with an ISO 250 port (either ISO-K or ISO-F). These operable blind doors include a manual knob for closure and are made of stainless steel with a Viton O-ring seal. The approximate pass through diameter of the door opening is 3.5" with an area of 9.6 in2. The simple construction makes the door field serviceable. Bakeout to 150°C is permissable. Fast Access ISO Entry Doors are RATED FOR VACUUM ONLY for pressures to 1 x 10-7 Torr. Blind FAEDs are available in ISO-100, 160, 200 and 250 flange sizes. They are used in place of blank ISO-K or ISO-F flanges and allow a user to quickly access the chamber for exchanging test objects. They are often used for load-lock applications. A FAED can be added to a vacuum chamber ISO port at any time. These ISO-K flanged doors use either single or double claw clamps along with a centering ring fitted with an O-ring for mounting. Use double claw clamps to mount to other ISO-K flanges. Use single claw clamps to mount to ISO-F flanges with bolt holes (smooth bored or threaded). See the table below for claw clamps and centering rings. Please download and read the IVP Common Vacuum Fittings - Selection and Assembly Guide for hardware selection and for joining procedures for making leak-tight connections. Please check out our other listings for Fast Access ISO Entry Doors with either tempered glass or fused silica viewing windows.