Keyword Part Number:
MKS 937B Half-Rack Combination Controller, Operates up to Six Vacuum Pressure Sensors Simultaneously, NO Cards, RS232 and RS485 (built in). MKS Part Number: 937B-US-NANANA-NA. The MKS 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The 937B controller is designed for versatility, reliability and economy. The large, easy to read, liquid crystal display provides readout for up to six sensors simultaneously. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. This controller enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections. Set Points: Twelve independently adjustable set points are standard. This allows for the automation of process related functions. The set point values are nonvolatile and remain unchanged after power down or power failure. They are easily viewed and configured in the channel set up screen. The 937B also includes an adjustable control set point that turns the cold cathode or hot cathode gauges power off or on, at the desired pressures, extending the sensor’s life. Leak Test: The leak test mode includes a bar graph and variable audible alert to assist in locating leaks within a system. The function operates with the cold cathode, hot cathode, Pirani, and convection sensors. By taking advantage of differences in tracer gas sensitivity, this provides an excellent tool for helping locate coarse system leaks. Analog Output Signals: The controller provides analog output signals accessible on the rear panel connector. Three types of analog signals are available. Unprocessed analog signals are used to provide the fastest response times. The logarithmic output voltages are scaled so that 0.6 Volts equals one decade of pressure. Combination output can be created by combining up to three sensors with a combined range from 10-11 to 20,000 Torr. Digital Signals: In addition to analog outputs, the 937B communicates digitally for direct computer communication with built in connections for RS232 or RS485. A communication slot in the 937B chassis accepts an optional Profibus DPV1 board. The 937B can communicate with a host computer using either of these ports. Remote control of set points and cold cathode high voltage disable are some of the many features available with communications options. Signal cables and optional cards for the MKS 937B are available on this website.
Condition: New
Part Number: P1012869
Price: €2,388.71
MKS Vacuum Sensor Card Capacitance Manometer and Piezo, for Series 937B and 946 Controllers. MKS Part Number: 100015267. The MKS Vacuum Sensor Card supports capacitance manometers and Piezo sensors with the 937B and 946 vacuum system controllers. These cards are used on controllers designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 946 and 937B Vacuum System Controllers simultaneous readout & control of up to 6 sensors and gauges.
Condition: New
Part Number: P1012841
Price: €948.82
MKS 626D 0.1 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting KF-16, PN 626D.1TDEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 0.1 Torr full scale maximum vacuum pressure reading value, a KF-16 vacuum flange connection, and have MKS part number 626D.1TDE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P103249
Price: €1,836.02
MKS 626D 0.1 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, UHV Vacuum Fitting Conflat CF 1.33 Inch Flange, 626D.1TCEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 0.1 Torr full scale maximum vacuum pressure reading value, a Conflat CF 1.33 inch ultra-high vacuum UHV flange connection, and have MKS part number 626D.1TCE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P1012572
Price: €1,836.02
MKS 626D 1 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting KF-16, PN 626D01TDEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 1 Torr full scale maximum vacuum pressure reading value, a KF-16 vacuum flange connection, and have MKS part number 626D01TDE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P103250
Price: €1,631.16
MKS 626D 10 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting KF-16, PN 626D11TDEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 10 Torr full scale maximum vacuum pressure reading value, a KF-16 vacuum flange connection, and have MKS part number 626D11TDE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P103251
Price: €1,713.73
MKS 626D 10 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting VCR 8 Female, PN 626D11TBEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 10 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, and have MKS part number 626D11TBE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P108076
Price: €1,717.92
MKS 626D 20 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting VCR 8 Female, PN: 626D21TBEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 20 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, and have MKS part number 626D21TBE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P1011605
Price: €1,631.16
MKS 626D 100 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting KF-16. MKS Part Number: 626D12TDE. The MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 100 Torr full scale maximum vacuum pressure reading value, a KF-16 vacuum flange connection, and have MKS part number 626D12TDE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P1011037
Price: €1,560.94
MKS 626D 100 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting VCR 8 Female, PN 626D12TBEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 100 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, and have MKS part number 626D12TBE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P109769
Price: €1,635.12
MKS 626D 1000 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting KF-16, PN 626D13TDE. The MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 1000 Torr full scale maximum vacuum pressure reading value, a KF-16 vacuum flange connection, and have MKS part number 626D13TDE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P1012570
Price: €1,713.73
MKS 626D 1000 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, Vacuum Fitting VCR 8 Female, PN 626D13TBEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 1000 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, and have MKS part number 626D13TBE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P1012571
Price: €1,713.73
MKS 626D 1000 Torr Baratron Absolute Capacitance Manometer, Vacuum Pressure Gauge Sensor, UHV Vacuum Fitting Conflat CF 1.33 Inch Flange, PN 626D13TCEThe MKS 626D unheated absolute Baratron® capacitance manometers are the latest analog, capacitance-based, high-performance vacuum and pressure transducers. They require ±15 VDC input voltage and provide a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS PDR2000 pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor’s diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signalconditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The MKS 626D Baratron capacitance manometers operate at ambient conditions. They are available in full scale pressure/vacuum ranges from 0.1 to 1000 Torr and are suited for many industrial, electronic, and research applications. These listing is for an MKS Type 626D capacitance manometers having a 15-pin D-subminiature signal connector, a 1000 Torr full scale maximum vacuum pressure reading value, a Conflat CF 1.33 inch ultra-high vacuum UHV flange connection, and have MKS part number 626D13TCE. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 15-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition Long-term output stability for state-of-the-art process repeatability Inconel® and Incoloy® nickel alloy construction of basic sensor operates without damage in virtually any chemical environment High overpressure limit ensures reliability during system mishaps Specified in percent of reading for best accuracy and improved process yield
Condition: New
Part Number: P109768
Price: €1,635.12
MKS 627H 0.02 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.25% of Reading, Vertical Calibration. MKS Part Number PN: 627HU2TBE1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 0.02 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.25% of reading, with vertical calibration, and have MKS part number 627HU2TBE1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P105931
Price: €3,065.19
MKS 627H 0.05 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.15% of Reading, Vertical Calibration. MKS Part Number PN: 627HU5TBD1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 0.05 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.15% of reading, with vertical calibration, and have MKS part number 627HU5TBD1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P1012580
Price: €2,624.55
MKS 627H 0.1 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.15% of Reading, Vertical Calibration. MKS Part Number PN: : 627H.1TBD1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 0.1 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.15% of reading, with vertical calibration, and have MKS part number : 627H.1TBD1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P1012581
Price: €2,476.96
MKS 627H 1 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.12% of Reading, Vertical Calibration. MKS Part Number PN: 627H01TBC1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 1 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.12% of reading, with vertical calibration, and have MKS part number 627H01TBC1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P1012582
Price: €2,992.31
MKS 627H 10 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.12% of Reading, Vertical Calibration. MKS Part Number PN: 627H11TBC1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 10 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.12% of reading, with vertical calibration, and have MKS part number 627H11TBC1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P1012583
Price: €2,601.02
MKS 627H 100 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.12% of Reading, Vertical Calibration. MKS Part Number PN: 627H12TBC1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 100 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.12% of reading, with vertical calibration, and have MKS part number 627H12TBC1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P1012584
Price: €2,849.82
MKS 627H 1,000 Torr Heated 45 °C, Absolute Baratron Capacitance Manometer, Vacuum Fitting VCR 8 Female, Accuracy 0.12% of Reading, Vertical Calibration. MKS Part Number PN: 627H13TBC1B. The 627H Baratron® capacitance manometer is heated to 45°C, accurate to 0.12% of Reading and includes updated temperature-control electronics to provide superior long-term stability and repeatability. This capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to accommodate today’s lower process pressures. Based on established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for excellent resistance to corrosive gases. The contemporary stainless steel package provides a cleanroom-compatible product. The product is interchangeable with earlier 627A, 627B, 627D, and 627F Baratron capacitance manometers and can be used with MKS power supplies, display units and pressure controllers, or other compatible power supply/ readout devices. These listing is for an MKS Type 627H capacitance manometer which is heated to 45 °C, have a 15-pin D-subminiature signal connector with Thread Lock, a 1,000 Torr full scale maximum vacuum pressure reading value, a VCR 8 female vacuum flange connection, an accuracy 0.12% of reading, with vertical calibration, and have MKS part number 627H13TBC1B. Compatible Controller and Cables: P102063 - Ideal Vacuum Cable For MKS PDR 2000 Power Supply and Digital Readout Cable 15-Pin Y Cable, Equivalent To CB2000S-1-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: Excellent long-term stability Percent of Reading accuracy for more precise output signal in lower pressure ranges Full Scale ranges low as 20 mTorr (0.03 mbar) for precise measurement of low pressure processes All-Inconel corrosion-resistant wetted surfaces Faster warm-up time Visual and electrical status of temperature and heater control circuit Compatible with earlier Baratron capacitance manometers, MKS power supply/readout modules, and pressure controllers Measures total pressure directly, independent of gas composition High overpressure rating for improved reliability Cleanroom-compatible stainless steel package
Condition: New
Part Number: P1012585
Price: €2,601.02
MKS Manometer Cable Connects 937B or 946 Controllers to 626 or 627 Manometers, 10 ft. (3m) Long. MKS Part Number: 100007555. The MKS vacuum gauge signal cable connects 937B or 946 controllers to 626 or 627 manometers. It has 9-pin type D subminiature and 15-pin type D subminiature connectors. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012848
Price: €218.98
MKS Manometer Cable Connects 937B or 946 Controllers to 626 or 627 Manometers, 25 ft. (7.5m). Long. MKS Part Number: 100007556. The MKS vacuum gauge signal cable connects 937B or 946 controllers to 626 or 627 manometers. It has 9-pin type D subminiature and 15-pin type D subminiature connectors. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012849
Price: €362.02
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 1 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C01TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 1 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C01TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P1012575
Price: €1,706.24
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 10 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C11TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 10 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C11TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P109995
Price: €1,654.00
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 100 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C12TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 100 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C12TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P1012576
Price: €1,570.71
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 1,000 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C13TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 1,000 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C13TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P1012577
Price: €1,570.71
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 5,000 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C53TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 5,000 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C53TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P1012578
Price: €1,949.53
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 10,000 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C14TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 10,000 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C14TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P1011161
Price: €1,855.25
MKS 722C General Purpose Baratron Absolute Capacitance Manometer, Pressure Range 20,000 Torr, VCR 4 Vacuum Fitting, 9-Pin Type D Connector, PN 722C24TCD2FA. Today’s process environments require small-sized pressure measurement instruments that provide accurate, repeatable, and reliable measurements at a lower cost. MKS has applied its expertise in capacitance manometer design and manufacturing technology to the development of the compact, 722C general purpose absolute Baratron® capacitance manometer. The flexible design of the 722C makes it an ideal solution for retrofit applications as well as new equipment designs. Robust sensor construction provides high overpressure tolerances, reducing errors caused by occasional line pressure spikes. All sensor wetted surfaces are made from Inconel® to ensure maximum compatibility with many process gases1. Sophisticated technology and strict process controls ensure clean, smooth finishes (=10 Ra) on all wetted surfaces. Signal conditioning circuitry is assembled using the latest techniques in surface mount technology. All transducers are backed with a full two-year warranty. These listing is for an MKS Type 722C general purpose capacitance manometers having a 9-pin D-subminiature signal connector, a 20,000 Torr full scale maximum vacuum pressure reading value, a VCR 4 female vacuum flange connection, and have MKS part number 722C24TCD2FA. Compatible Controller and Cables: P102061 - MKS PDR 2000 Power Supply and Digital Readout Cable 9-Pin Cable CB2000S-2-M1 P102062 - MKS PDR 2000 Digital Power Supply and Digital Readout Capacitance Manometer Controller P1010127 - Ideal Vacuum Dual Capacitance Manometer Controller (DCM), Power Supply and Digital Pressure Readout Product Features: 0 to 10 VDC proportional analog output with 9-pin D-sub connector Direct measurement of chamber total pressure independent of gas type or composition High accuracy over a wide operating temperature range Overpressure limit of 45 psia or 2x Full Scale (whichever is greater) assures no degradation in zero repeatability or performance All wetted sensor surfaces are micro-finished to =10 Ra, eliminating inclusion sites for corrosion growth Smaller manometer size helps achieve overall system size reduction Corrosion resistant - all-metal, all-welded construction exposes only Inconel and stainless steel to the media Drop in replacement compatible with earlier 722 Baratron capacitance manometers
Condition: New
Part Number: P1012579
Price: €1,888.32
MKS Manometer Cable Connects 937B or 946 Controllers to 722 Manometers, DB9 Male to DB9 Female, 10 ft. (3m) Long. MKS Part Number: 100016951. The MKS Manometer cable connects 937B or 946 controllers to Series 722 capacitance manometers. It has 9-pin type D subminiature connectors. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012850
Price: €216.08
MKS Manometer Cable Connects 937B or 946 Controllers to 722 Manometers, DB9 Male to DB9 Female, 25 ft. (7.5m). Long. MKS Part Number: 100016952. The MKS Manometer cable connects 937B or 946 controllers to Series 722 Manometers, DB9 Male to DB9 Female. It has 9-pin type D subminiature connectors. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012851
Price: €367.90
MKS Vacuum Sensor Card Dual Convection Pirani, for Series 937B and 946 Controllers. MKS Part Number: 100015132. The MKS Vacuum Sensor Card supports dual pirani convection sensors and is used with the 937B and 946 vacuum system controllers. These cards are used on controllers designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 946 and 937B Vacuum System Controllers simultaneous readout & control of up to 6 sensors and gauges.
Condition: New
Part Number: P1012842
Price: €704.04
MKS HPS® Series 317 Convection Enhanced Pirani Sensor KF16 NW16 (PN 103170010SH) (Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller) The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 100 Torr to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this KF16 NW16 flange. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available download in PDF format below.
Condition: New
Part Number: P103327
Price: €433.58
MKS HPS® Series 317 Convection Enhanced Pirani Sensor KF25 NW25 (PN 103170027SH) (Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller) The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 100 Torr to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this KF25 NW25 flange. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P103328
Price: €457.10
MKS HPS® Series 317 Convection Enhanced Pirani Vacuum Sensor features a 0.001 to 1000 Torr, Conflat CF 1.33 in. MKS Part Number: 103170013SH. The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost, Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 0.001 to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this CF 1.33 inch Mini-CF flange fitting. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P1012864
Price: €495.33
MKS HPS® Series 317 Convection Enhanced Pirani Vacuum Sensor features a 0.001 to 1000 Torr, Conflat CF 2.75 in. MKS Part Number: 103170014SH. The MKS HPS® 317 Convection-Enhanced Pirani Sensor provides dependable and stable pressure measurement at a very low cost, Compatible with MKS 947 Convection Enhanced Pirani Gauge Controller. Since the only materials exposed to vacuum are stainless steel, nickel, glass, and platinum, the sensor is compatible with a wide array of process gases and is especially suitable for UHV applications. The platinum filament effectively eliminates any reading variance throughout a convection sensor’s higher measuring range. More accurate than a thermocouple sensor, the 317 Sensor measures over a wider pressure range and responds more rapidly to process pressure changes. The upper measuring limit of a convection-enhanced Pirani sensor is increased over that of a traditional Pirani sensor from 0.001 to 1,000 Torr. This higher limit is useful when monitoring the pumpdown of a vacuum system from atmosphere to a base pressure. The sensor compensates for any changes in room temperature ranging from 10° to 50°C. Like all thermal conductivity sensors, the 317 sensor is innately gas-type sensitive. This feature makes it a simple solution for locating medium to fine leaks in vacuum systems. It complements a mass spectrometer leak detector, which is more efficient in finding smaller leaks. The sensor, which is shielded against RF noise, meets CE mark requirements and can be baked to 100°C. This 317 Sensor include standard vacuum connections such as this CF 2.75 Conflat flange. The cable for this sensor is not included but available in standard 10 feet lengths. The 317 Sensor can be used with the Series 947 Convection Pirani Vacuum Gauge Controller also sold on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P108198
Price: €495.33
MKS Vacuum Gauge Cable for 345 or 317 Connecting to 937B and 946 Controllers, 10 Ft. (3m) Long. MKS Part Number: 103170006SH. The MKS vacuum gauge signal cable connects 345 or 317 vacuum gauge sensors to 945, 947, 937B, and 946 controllers. It connects to the back of the MKS controllers and to the side of the MKS 345 or 317 Pirani Sensor. This is the Cable ONLY. The Series 947 Convection-Enhanced Pirani Controller offers many standard features and is easy to use. An analog output signal proportional to pressure is standard and is accessible from the rear of the controller, there is where this cable is connected. Processes are controlled with two independent relay set points that are standard on this single-channel controller. The relays can be set to trip anywhere within the controller’s set point range. All of the operating controls are conveniently accessible from the front panel of the controller, including the power on-off switch. Adjust set points from the front panel while viewing the large, easy-to-read display. Set point activation is shown with red LED indicators. Set points can be checked at any time with no break in process control.
Condition: New
Part Number: P103329
Price: €172.90
MKS Vacuum Gauge Cable for 345 or 317 Connecting to 945, 947, 937B or 946 Controllers, 25 ft. (7.5m) Long. MKS Part Number: 103170007SH. The MKS vacuum gauge signal cable connects 345 or 317 vacuum gauge sensors to 945, 947, 937B, or 946 controllers. It connects to the back of the MKS controllers and to the side of the MKS 345 or 317 Pirani Sensor. This is the Cable ONLY. The Series 947 Convection-Enhanced Pirani Controller offers many standard features and is easy to use. An analog output signal proportional to pressure is standard and is accessible from the rear of the controller, there is where this cable is connected. Processes are controlled with two independent relay set points that are standard on this single-channel controller. The relays can be set to trip anywhere within the controller’s set point range. All of the operating controls are conveniently accessible from the front panel of the controller, including the power on-off switch. Adjust set points from the front panel while viewing the large, easy-to-read display. Set point activation is shown with red LED indicators. Set points can be checked at any time with no break in process control.
Condition: New
Part Number: P1012845
Price: €230.53
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 1/8 Male NPT MKS Granville Phillips Part Number 275071 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).
Condition: New
Part Number: P101660
Price: €251.27
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, 1/4 inch Female 4 VCR Fitting MKS Granville Phillips Part Number: 275185 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is not avaliable and is replaced with the MKS Granville Phillips 475).
Condition: New
Part Number: P102686
Price: €313.07
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 2.75 inch MKS Granville Phillips Part Number: 275238 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).
Condition: New
Part Number: P102684
Price: €350.15
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 8 VCR 1/2 inch flange MKS Granville Phillips Part Number: 275282 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller is replaced by the MKS Granville Phillips 475, not included).
Condition: New
Part Number: P102685
Price: €350.39
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, Conflat 1.33 flange MKS Granville Phillips Part Number: 275256 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).
Condition: New
Part Number: P102578
Price: €304.75
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 16 Flange MKS Granville Phillips Part Number: 275203 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).
Condition: New
Part Number: P102687
Price: €286.91
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 25 Flange MKS Granville Phillips Part Number: 275196 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).
Condition: New
Part Number: P102579
Price: €320.96
MKS Granville Phillips 275 Convectron Gauge Vacuum Pressure Measurement Sensor, NW KF 40 Flange MKS Granville Phillips Part Number: 275316 The 275 MKS Granville Phillips convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The MKS Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the MKS Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (MKS Granville Phillips 375 Convectron Controller shown in photographs is avaliable but not included at list price).
Condition: New
Part Number: P102580
Price: €377.70
MKS Vacuum Gauge Cable Connects 937B Controllers to GP275 Vacuum Gauges, 10 ft. (3m) Long. MKS Part Number: 100016980. The MKS vacuum gauge signal cable connects 937B controllers to GP275 vacuum gauges. It connects to the back of the MKS controllers and to the side of the GP275 vacuum gauges. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012846
Price: €476.52
MKS Vacuum Gauge Cable Connects 937B Controllers to GP275 Vacuum Gauges, 25 ft. (7.5m) Long. MKS Part Number: 100016981. The MKS vacuum gauge signal cable connects 937B controllers to GP275 vacuum gauges. It connects to the back of the MKS controllers and to the side of the GP275 vacuum gauges. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012847
Price: €512.38
MKS Vacuum Sensor Card Cold Cathode, for Series 937B and 946 Controllers. MKS Part Number: 100018446. The MKS Vacuum Sensor Card Cold Cathode is used with the 937B and 946 vacuum system controllers. These cards are used on controllers designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 946 and 937B Vacuum System Controllers simultaneous readout & control of up to 6 sensors and gauges.
Condition: New
Part Number: P1012843
Price: €964.65
MKS HPS® 423 I-Mag® Sensor Cold Cathode Vacuum Gauge KF25, NW25, compatible with MKS 943 Cold Cathode vacuum controller. MKS Part Number: 104230004 Using an inverted magnetron design, the 423 I-Mag® sensor can operate at pressures much lower than a traditional Penning cold cathode sensor, as low as 10-11 Torr with the proper controller. This increased pressure range makes the HPS® Cold Cathode sensor ideal for UHV use. A unique design feature of the HPS® Cold Cathode sensor is a second feedthrough for ion collection. In an ordinary single feedthrough design, any current leakage between the anode and ground would result in pressure measurement errors. Only the ion current from the cathode contributes to a measurement reading in a dual feedthrough design, making it ideal for process monitoring. With no filament to burn out, the 423 I-Mag® sensor is not ruined by sudden inrushes of air and is resistant to vibration damage. Additionally, there is no need to adjust the emission current or to degas the gauge, reducing response time to pressure changes. If bakeout is required, the magnets and sensor connectors can be removed and the sensor can be baked to 400°C. This is a Cold Cathode Sensor ONLY, the MKS signal cable and MKS 943 Controller for this unit are sold separetely on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P103331
Price: €669.41
MKS HPS 423 I-Mag Sensor Cold Cathode Vacuum Gauge Conflat 2.75 Inlet. MKS Part Number: 104230002. (Compatible with MKS 943 Cold Cathode Vacuum Controller) Using an inverted magnetron design, the 423 I-Mag Sensor can operate at pressures much lower than a traditional Penning cold cathode sensor, as low as 10-11 Torr with the proper controller. This increased pressure range makes the HPS Cold Cathode sensor ideal for UHV use. A unique design feature of the HPS Cold Cathode sensor is a second feedthrough for ion collection. In an ordinary single feedthrough design, any current leakage between the anode and ground would result in pressure measurement errors. Only the ion current from the cathode contributes to a measurement reading in a dual feedthrough design, making it ideal for process monitoring. With no filament to burn out, the 423 I-Mag sensor is not ruined by sudden inrushes of air and is resistant to vibration damage. Additionally, there is no need to adjust the emission current or to degas the gauge, reducing response time to pressure changes. If bakeout is required, the magnets and sensor connectors can be removed and the sensor can be baked to 400°C. This is a Brand New Cold Cathode Sensor ONLY the MKS signal cable and MKS 943 Controller for this unit are sold separetely on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P107571
Price: €778.55
MKS Vacuum Gauge Cable Connects 946 Controller to 423 I-Mag® Cold Cathode Sensor, 10 ft. (3m) Long. MKS Part Number: 100016295. The MKS Manometer cable connects 946 controllers to 423 I-Mag® Cold Cathode sensor. This is the cable ONLY. The series 937B digital combination vacuum gauge controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012854
Price: €777.37
MKS Vacuum Gauge Cable Connects 946 Controller to 423 I-Mag Cold Cathode Sensor, 25 ft. (7.5m) Long. MKS Part Number: 100016296. The MKS Manometer cable connects 946 controllers to 423 I-Mag Cold Cathode Sensor. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012855
Price: €1,512.77
MKS 431 Cold Cathode Vacuum Sensor, 1x10-11 to 1x10-2 Torr, CF-2.75 in. Flange Fitting. MKS Part Number: 104310002. The MKS 431 Cold Cathode Vacuum Sensor features a 1x10-11 to 1x10-2 Torr vacuum measurement range, high operating temperature and a 2.75 inch size CF flange fitting. It is based on the ionization probability of the gas, with the ionization as a result of a high voltage discharge of electrons. These cold cathode pressure vacuum sensors are based on an inverted magnetron design, for an increased measurement range. The dual feedthrough for ion collection is a unique feature, making the pressure reading more accurate than other cold cathode vacuum and pressure sensors. Signal cables for this cold cathode vacuum sensor are available on this website.
Condition: New
Part Number: P1012861
Price: €1,434.08
MKS Manometer Cable Connects 937B or 946 Controllers to 431 I-Mag® Cold Cathode Sensor, 10 ft. (3m) Long. MKS Part Number: 100016217. The MKS Manometer cable connects 937B or 946 controllers to 431 I-Mag® Cold Cathode Sensor. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012852
Price: €524.72
MKS Manometer Cable Connects 937B or 946 Controllers to 431 I-Mag® Cold Cathode Sensor, 25 ft. (7.5m) Long. MKS Part Number: 100016218. The MKS Manometer cable connects 937B or 946 controllers to 431 I-Mag® Cold Cathode Sensor. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012853
Price: €569.33
MKS Vacuum Sensor Card Hot Cathode, for Series 937B and 946 Controllers. MKS Part Number: 100015641. The MKS Vacuum Sensor Card Cold Cathode is used with the 937B and 946 vacuum system controllers. These cards are used on controllers designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 946 and 937B Vacuum System Controllers simultaneous readout & control of up to 6 sensors and gauges.
Condition: New
Part Number: P1012871
Price: €894.99
MKS Hot Cathode Vacuum Sensor Nude Tube, Iridium Filament for 1x10-2 to 1x10-11 Torr, CF-2.75 in Flange Fitting. MKS Part Number: 100006842. The MKS Nude Tube Vacuum Sensor features a Yttria-coated Iridium filament for a 1x10-2 to 1x10-11 Torr vacuum measurement range and a 2.75 in. CF flange fitting. This Bayard-Alpert style ionization vacuum sensor, which uses a fine wire collector located in the center of a grid. Because of its small area, few x-rays hit the collector, and a vacuum gauge can measure pressures to very low levels. Because the sensing portion of the tube is located within the vacuum system and experiences the system true pressure, nude tubes give a representative pressure measurement and respond more quickly than a glass envelope sensor to pressure changes. Signal cables for this cold cathode vacuum sensor are available on this website.
Condition: New
Part Number: P1012863
Price: €1,107.75
MKS Hot Cathode Vacuum Sensor Nude Tube, tungsten filament for 1x10-2 to 1x10-11 Torr, CF-2.75 in Flange Fitting. MKS Part Number: 100005980. The MKS Nude Tube Vacuum Sensor features a tungsten filament for a 1x10-2 to 1x10-11 Torr vacuum measurement range and a 2.75 in. CF flange fitting. This Bayard-Alpert style ionization vacuum sensor, which uses a fine wire collector located in the center of a grid. Because of its small area, few x-rays hit the collector, and a vacuum gauge can measure pressures to very low levels. Because the sensing portion of the tube is located within the vacuum system and experiences the system true pressure, nude tubes give a representative pressure measurement and respond more quickly than a glass envelope sensor to pressure changes. Signal cables for this cold cathode vacuum sensor are available on this website.
Condition: New
Part Number: P1012862
Price: €894.03
MKS Vacuum Gauge Cable Connects 937B or 946 to Hot Cathode Low Power Nude, 10 ft. (3m) Long. MKS Part Number: 100010909. The MKS Manometer cable connects 937B or 946 to Hot Cathode Low Power Nude. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012856
Price: €688.08
MKS Vacuum Gauge Cable Connects 937B or 946 to Hot Cathode Low Power Nude, 25 ft. (7.5m) Long. MKS Part Number: 100010910. The MKS Manometer cable connects 937B or 946 to Hot Cathode Low Power Nude. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012857
Price: €843.52
MKS Half Rack Mounting Kit for Series 937B and 946 Vacuum Gauge Controllers. MKS Part Number: RM-13. The MKS Half Rack Mounting Kit is compatible with series 937B and 946 Vacuum Gauge Controllers. This is the hardware ONLY. The MKS 946 is a versatile half-rack vacuum gauge measurement and control system, it provides power and simultaneous readout for up to six different vacuum gauges and/or mass flow controllers, with options for controlling pressure. Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 946 Vacuum System Controller is a six channel/sequentially selectable single readout. Compatible with mass flow controllers and mass flow readouts. Signal cables for the MKS 946 are available on this website.
Condition: New
Part Number: P1012860
Price: €171.55