Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Pfeiffer ASM340 Leak Detectors On Sale Agilent Varian Helium Leak Detectors On Sale Agilent TriScroll Pumps On Sale Edwards nXR Multi Stage Roots Pumps On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale Edwards nEXT300D TStations On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Viton O-Ring for Grooved ASA 4.25 / ANSI 1 Flange
In Stock
18


Viton O-Ring for Grooved ASA 4.25 / ANSI 1 Flange. This is an elastomer Viton O-Ring for a grooved ASA 4.25 / ANSI 1 flange. The O-ring’s width is 0.120 in. and its I.D. is 1.875 in. Used to mate an ASA 4.25 / ANSI 1 grooved flange with an ASA 4.25 / ANSI 1 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107452



Price: $9.14




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 5.0 / ANSI 1.5 Flange
In Stock
91


Viton O-Ring for Grooved ASA 5.0 / ANSI 1.5 Flange. This is an elastomer Viton O-Ring for a grooved ASA 5.0 / ANSI 1.5 flange. The O-ring’s width is 0.120 in. and its I.D. is 2.500 in. Used to mate an ASA 5.0 / ANSI 1.5 grooved flange with an ASA 5.0 / ANSI 1.5 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107453



Price: $13.32




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 6.0 / ANSI 2 Flange
In Stock
78


Viton O-Ring for Grooved ASA 6.0 / ANSI 2 Flange. This is an elastomer Viton O-Ring for a grooved ASA 6.0 / ANSI 2 flange. The O-ring’s width is 0.120 in. and its I.D. is 3.500 in. Used to mate an ASA 6.0 / ANSI 2 grooved flange with an ASA 6.0 / ANSI 2 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107454



Price: $23.07




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 7.5 / ANSI 3 Flange
In Stock
14


Viton O-Ring for Grooved ASA 7.5 / ANSI 3 Flange. This is an elastomer Viton O-Ring for a grooved ASA 7.5 / ANSI 3 flange. The O-ring’s width is 0.120 in. and its I.D. is 4.625 in. Used to mate an ASA 7.5 / ANSI 3 grooved flange with an ASA 7.5 / ANSI 3 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107455



Price: $39.83




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 9.0 / ANSI 4 Flange
In Stock
12


Viton O-Ring for Grooved ASA 9.0 / ANSI 4 Flange. This is an elastomer Viton O-Ring for a grooved ASA 9.0 / ANSI 4 flange. Its width is 0.120 in. and I.D. is 6.0 in. Used to mate an ASA 9.0 / ANSI 4 grooved flange with an ASA 9.0 / ANSI 4 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107456



Price: $22.31




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 11.0 / ANSI 6 Flange
In Stock
26


Viton O-Ring for Grooved ASA 11.0 / ANSI 6 Flange. This is an elastomer Viton O-Ring for a grooved ASA 11.0 / ANSI 6 flange. The O-ring’s width is 0.120 in. and its I.D. is 8.000 in. Used to mate an ASA 11.0 / ANSI 6 grooved flange with an ASA 11.0 / ANSI 6 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107457



Price: $30.77




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 13.5 / ANSI 8 Flange
In Stock
21


Viton O-Ring for Grooved ASA 13.5 / ANSI 8 Flange. This is an elastomer Viton O-Ring for a grooved ASA 13.5 / ANSI 8 flange. The O-ring’s width is 0.120 in. and its I.D. is 10 in. Used to mate an ASA ASA 13.5 / ANSI 8 grooved flange with an ASA 13.5 / ANSI 8 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107458



Price: $44.65




Currency: US Dollar (USD)

Viton O-Ring for Grooved ASA 16.0 / ANSI 10 Flange
In Stock
2081


Viton O-Ring for Grooved ASA 16.0 / ANSI 10 Flange. This is an elastomer Viton O-Ring for a grooved ASA 16.0 / ANSI 10 flange. The O-ring’s width is 0.120 in. and its I.D. is 12 in. Used to mate an ASA 16.0 / ANSI 10 grooved flange with an ASA 16.0 / ANSI 10 smooth (non-grooved) flange. Viton® (FKM) is the most popular O-ring seal material used in rough vacuum systems and is rated for high vacuum to 1 x 10-8 Torr. Viton is chemical and compression set resistant and has a working temperature range (continuous) of approximately -20°C to +150°C (-4°F to +300°F). The permeability of Viton does not allow it to be used for ultra-high vacuum applications. ASA flanges are available with a smooth or grooved face, rotatable or non-rotatable, bored or non-bored, and are named for the outer diameter of the flange, from 4.25 to 19 inches. The ANSI name for the same flange size corresponds to the nominal tubing size that can be welded to it, and ranges from 1 to 12 inches in diameter. ASA / ANSI flanges were originally used for steam pipes but have now been adapted to vacuum. Diffusion pumps, roots blowers, cryopumps and large rotary piston pumps are some examples of vacuum pumps where these flanges are used. When sealed together with O-rings made of Viton, Buna or Silicone, they are capable of achieving vacuum pressures as low as 1x10-8 Torr. We have a complete line of ASA flanges, O-rings, and bolt sets to fit your most demanding needs.

Condition: New



Part Number: P107459



Price: $36.85




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com