Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Edwards nEXT300D TStations On Sale Leybold B Series Pumps On Sale Leybold BCS Series Pumps On Sale Edwards iXH Dry Semiconductor Pumps On Sale Leybold Sogevac Neo-D Dual Stage Rotary Vane Vacuum Pumps On Sale Leybold VaroDry Series Pumps

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Welded Vacuum Chambers ExploraVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Vacuum Ovens Gas and Leak Detection Gauges And Controllers Pressure Measurement Chillers
×

Load

HVA KF-16, DN16, NW16, Pneumatic Gate Valve, NO Solenoid, 0.625 inch ID, Viton Seals, S/S
In Stock: 1


HVA KF-16, DN16, NW16 Pneumatic Gate Valve, 0.625 inch ID (DN16), Viton Gate and Viton Bonnet Seals NO Solenoid, NO Reed Switch Position Indicator, Stainless Steel Body, HVA Part No. 11210-0063 In the simplest of terms, HVA pnematic vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve’s carriage/gate. The actuator is attached to the valve’s body via a rectangular bonnet flange. The gate closes or opens one of the valve’s body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Pneumatic Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Pneumatic Gate Valve HV (High Vacuum) with a KF-16 quick flange and .625 inch opening, with NO solenoid. This gate valve has no position indicators. Solenoids do not come with this gate valve and can be ordered separately via this website. Solenoids are manufactured for a single operating voltage and are available in either AC or DC. Care should be taken when ordering to select the correct solenoid voltage for your application. Detailed installation instructions for solenoids are contained in the solenoid section. Specifications: These 11000 series pneumatic standard cycle gate valves are designed for dependable High and Ultra High Vacuum (UHV) applications, service lifes of 100,000 cycles are typical. Our conflat metal-sealed gate valve versions are rated for UHV applications down to 1x10-10 Torr and bakeable up to temperatures of 200°C. They are are often used in combination with cryo, turbo, and ion high vacuum pumps. These HVA gate valves are built with a proprietary vacuum brazing process to minimize outgassing during operation. These pneumatic gate valves are available in sizes that include the conflat flanged (CF) in 1.33 , 2.75, 3.375, 4.5, 6, 8 and 10 inch sizes; ISO LF flanged ISO-63, -100, -160, -200 sizes; and quick flanged sizes KF-16, KF-40, and KF-50. For more specifications see our detailed graphic below. The installation and operating instructions manual can be downloaded in PDF format below.

Condition: New



Product Number: P106182



Price: $1,305.31



HVA KF-25, DN25, NW25, Pneumatic Gate Valve, NO Solenoid, 1.0 inch ID, Viton Seals, S/S
In Stock: 1


HVA KF-25, DN25, NW25 Pneumatic Gate Valve, 1.00 inch ID (DN25), Viton Gate and Viton Bonnet Seals NO Solenoid, Reed Switch Position Indicator, Stainless Steel Body, HVA Part No. 11210-0103R In the simplest of terms, HVA pnematic vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve’s carriage/gate. The actuator is attached to the valve’s body via a rectangular bonnet flange. The gate closes or opens one of the valve’s body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Pneumatic Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Pneumatic Gate Valve HV (High Vacuum) with a KF-25 quick flange and 1.00 inch opening, with NO solenoid. Position indicator wires are connected via the pneumatic actuator. They are simple contact switches that allow valve position to be confirmed through high or low conductance. These are low power contacts, for example, typical application would be 20 mA max at 120 VAC. Solenoids do not come with this gate valve and can be ordered separately via this website. Solenoids are manufactured for a single operating voltage and are available in either AC or DC. Care should be taken when ordering to select the correct solenoid voltage for your application. Detailed installation instructions for solenoids are contained in the solenoid section. Specifications: These 11000 series pneumatic standard cycle gate valves are designed for dependable High and Ultra High Vacuum (UHV) applications, service lifes of 100,000 cycles are typical. Our conflat metal-sealed gate valve versions are rated for UHV applications down to 1x10-10 Torr and bakeable up to temperatures of 200°C. They are are often used in combination with cryo, turbo, and ion high vacuum pumps. These HVA gate valves are built with a proprietary vacuum brazing process to minimize outgassing during operation. These pneumatic gate valves are available in sizes that include the conflat flanged (CF) in 1.33 , 2.75, 3.375, 4.5, 6, 8 and 10 inch sizes; ISO LF flanged ISO-63, -100, -160, -200 sizes; and quick flanged sizes KF-16, KF-25, KF-40, and KF-50. For more specifications see our detailed graphic below. The installation and operating instructions manual can be downloaded in PDF format below.

Condition: New



Product Number: P107352



Price: $1,721.90



HVA KF-40, DN40, NW40, Pneumatic Gate Valve, NO Solenoid, 1.5 inch ID, Viton Seals, S/S
Out of Stock
Expecting: 1
Arrival: 1 on 2021-10-22


HVA KF-40, DN40, NW40 Pneumatic Gate Valve, 1.5 inch ID (DN40), Viton Gate and Viton Bonnet Seals NO Solenoid, Reed Switch Position Indicator, Stainless Steel Body, HVA Part No. 11210-0153R In the simplest of terms, HVA pnematic vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve’s carriage/gate. The actuator is attached to the valve’s body via a rectangular bonnet flange. The gate closes or opens one of the valve’s body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Pneumatic Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Pneumatic Gate Valve HV (High Vacuum) with a KF-40 quick flange and 1.5 inch opening, with NO solenoid. Position indicator wires are connected via the pneumatic actuator. They are simple contact switches that allow valve position to be confirmed through high or low conductance. These are low power contacts, for example, typical application would be 20 mA max at 120 VAC. Solenoids do not come with this gate valve and can be ordered separately via this website. Solenoids are manufactured for a single operating voltage and are available in either AC or DC. Care should be taken when ordering to select the correct solenoid voltage for your application. Detailed installation instructions for solenoids are contained in the solenoid section. Specifications: These 11000 series pneumatic standard cycle gate valves are designed for dependable High and Ultra High Vacuum (UHV) applications, service lifes of 100,000 cycles are typical. Our conflat metal-sealed gate valve versions are rated for UHV applications down to 1x10-10 Torr and bakeable up to temperatures of 200°C. They are are often used in combination with cryo, turbo, and ion high vacuum pumps. These HVA gate valves are built with a proprietary vacuum brazing process to minimize outgassing during operation. These pneumatic gate valves are available in sizes that include the conflat flanged (CF) in 1.33 , 2.75, 3.375, 4.5, 6, 8 and 10 inch sizes; ISO LF flanged ISO-63, -100, -160, -200 sizes; and quick flanged sizes KF-16, KF-40, and KF-50. For more specifications see our detailed graphic below. The installation and operating instructions manual can be downloaded in PDF format below.

Condition: New



Product Number: P106183



Price: $1,721.90



Nor-Cal KF-40, DN40, NW40, Pneumatic Gate Valve, With Solenoid, 1.5 inch ID, Viton Seals, S/S GVP-1502-NW-S22
In Stock: 1


Nor-Cal KF-40, DN40, NW40 Pneumatic Gate Valve, 1.5 inch ID (DN40), Viton Gate and Viton Bonnet Seals With Solenoid, Reed Switch Position Indicator, Stainless Steel Body, 24 VDC Poppet Valve. Nor-Cal Part No. GVP-1502-NW-S22 Our linear gate valves have an ultra-slim profile, which makes them perfect for applications where space is limited and their smaller volume results in lower out gassing and faster pump down. Larger sizes have a unique feature in the actuator; this dampens the vibration, which can arise when the gate is opened. This makes these valves ideal for semiconductor and other vibration sensitive processes. Nor-Cal Products 'elastomer sealed pneumatic gate valves have a vacuum range of 1x10-9 Torr. These gate valves are electropolished inside and out to improve corrosion resistance. Air to open, Air to Close 80 psi max air pressure, with 24VDC Poppet Valves. For Complete Specs and Operation Manual.pdf see Downloads to the left.

Condition: New



Product Number: P1011718



Price: $2,628.05



HVA KF-50, DN50, NW50, Pneumatic Gate Valve, NO Solenoid, 2 inch ID, Viton Seals, S/S
Out of Stock
Expecting: 1
Arrival: 1 on 2022-01-21


HVA KF-50, DN50, NW40 Pneumatic Gate Valve, 2 inch ID (DN50), Viton Gate and Viton Bonnet Seals NO Solenoid, Reed Switch Position Indicator, Stainless Steel Body, HVA Part No. 11210-0203R In the simplest of terms, HVA pnematic vacuum gate valves are devices that regulate the flow of gases, fluids or materials through a structure or aperture by opening, closing or obstructing a port or passageway. Gate valve assemblies consist of three key components: an actuator, a carriage/gate and a valve body. The actuator provides the power to position or transport the valve’s carriage/gate. The actuator is attached to the valve’s body via a rectangular bonnet flange. The gate closes or opens one of the valve’s body ports. The valve body is a vacuum tight chamber that is screwed, flanged or welded into a larger vacuum vessel or system. The 11000 Series Pneumatic Gate Valves feature a positive lock-over center mechanism. Linear actuation allows the use of a welded bellows to seal the actuator (i.e. no rotary seals). Shock and vibration are reduced to a minimum by a unique air cylinder design. This feature is extremely beneficial for semiconductor fabrication and other sensitive processing requiring operation which is relatively free of vibration. The HVA stainless steel body offers one of the smallest interior surface areas in the vacuum valve industry. The body and all major internal components are vacuum furnace brazed at 1100°C, at 1x10-6 Torr, ensuring maximum joint integrity. This eliminates the possibility of virtual leaks or entrapment areas and minimizes body distortion found in conventionally welded valves. For maintenance purposes, the carriage assembly can be removed from the body without removing the valve from the system. This is a 1100 Series Standard Cycle Pneumatic Gate Valve HV (High Vacuum) with a KF-50 quick flange and 2 inch opening, with NO solenoid. Position indicator wires are connected via the pneumatic actuator. They are simple contact switches that allow valve position to be confirmed through high or low conductance. These are low power contacts, for example, typical application would be 20 mA max at 120 VAC. Solenoids do not come with this gate valve and can be ordered separately via this website. Solenoids are manufactured for a single operating voltage and are available in either AC or DC. Care should be taken when ordering to select the correct solenoid voltage for your application. Detailed installation instructions for solenoids are contained in the solenoid section. Specifications: These 11000 series pneumatic standard cycle gate valves are designed for dependable High and Ultra High Vacuum (UHV) applications, service lifes of 100,000 cycles are typical. Our conflat metal-sealed gate valve versions are rated for UHV applications down to 1x10-10 Torr and bakeable up to temperatures of 200°C. They are are often used in combination with cryo, turbo, and ion high vacuum pumps. These HVA gate valves are built with a proprietary vacuum brazing process to minimize outgassing during operation. These pneumatic gate valves are available in sizes that include the conflat flanged (CF) in 1.33 , 2.75, 3.375, 4.5, 6, 8 and 10 inch sizes; ISO LF flanged ISO-63, -100, -160, -200 sizes; and quick flanged sizes KF-16, KF-40, and KF-50. For more specifications see our detailed graphic below. The installation and operating instructions manual can be downloaded in PDF format below.

Condition: New



Product Number: P106184



Price: $1,763.56



Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com