Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-us
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Edwards nEXT300D TStations On Sale Edwards nXR Multi Stage Roots Pumps On Sale Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale Adixen 2021C2 Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

IVP Ideal Seal, Conflat CF 1.33 in. Butterfly Valve, 1.00 in. Thick, Manual Quarter-Turn, SS
In Stock
19


Ideal Seal, Conflat CF 1.33 in. Butterfly Valve, 1.00 Inch Thick, Manual Quarter-Turn, CF Interface, Stainless Steel. These manual butterfly valves provide a low-cost alternative to bellows sealed gate valves. These valves manually turn from the fully-closed position to fully open with only a quarter turn of the knob. A patented design allows the sealing disk to center itself when closing, with even pressure around the copper knife edge O-ring. This design also helps to lower the amount of scuffing or rolling of the O-ring. Quarter-turn actuation, small footprint and the shortest possible gas path make manual butterfly valves the preferred choice for many applications. These Ideal Vacuum Products vacuum butterfly valves are designed to have a low leak rate, typically on the order of 1x10-9 std. cc/sec. Helium. These butterfly valves have a Conflat CF 1.33 in. vacuum flange for connection to the vacuum system. They are manually operated, made of Stainless Steel and are manufactured in the USA by Ideal Vacuum Products. Requires CF copper gasket, bolts and nut plates for installation, not included.

Condition: New



Part Number: P108175



Price: $370.76


Regular Price: $529.65




Currency: US Dollar (USD)

IVP Ideal Seal, Conflat CF 2.125 in. Butterfly Valve, 1.00 in. Thick, Manual Quarter-Turn, SS
In Stock
13


Ideal Seal, Conflat CF 2.125 in. Butterfly Valve, 1.00 Inch Thick, Manual Quarter-Turn, CF Interface, Stainless Steel. These manual butterfly valves provide a low-cost alternative to bellows sealed gate valves. These valves manually turn from the fully-closed position to fully open with only a quarter turn of the knob. A patented design allows the sealing disk to center itself when closing, with even pressure around the copper knife edge O-ring. This design also helps to lower the amount of scuffing or rolling of the O-ring. Quarter-turn actuation, small footprint and the shortest possible gas path make manual butterfly valves the preferred choice for many applications. These Ideal Vacuum Products vacuum butterfly valves are designed to have a low leak rate, typically on the order of 1x10-9 std. cc/sec. Helium. These butterfly valves have a Conflat CF 2.125 in. vacuum flange for connection to the vacuum system. They are manually operated, made of Stainless Steel and are manufactured in the USA by Ideal Vacuum Products. Requires CF copper gasket, bolts and nut plates for installation, not included.

Condition: New



Part Number: P108168



Price: $393.23


Regular Price: $561.75




Currency: US Dollar (USD)

IVP Ideal Seal, Conflat CF 2.75 in. Butterfly Valve, 1.00 in. Thick, Manual Quarter-Turn, SS
In Stock
1


Ideal Seal, Conflat CF 2.75 in. Butterfly Valve, 1.00 Inch Thick, Manual Quarter-Turn, CF Interface, Stainless Steel. These manual butterfly valves provide a low-cost alternative to bellows sealed gate valves. These valves manually turn from the fully-closed position to fully open with only a quarter turn of the knob. A patented design allows the sealing disk to center itself when closing, with even pressure around the copper knife edge O-ring. This design also helps to lower the amount of scuffing or rolling of the O-ring. Quarter-turn actuation, small footprint and the shortest possible gas path make manual butterfly valves the preferred choice for many applications. These Ideal Vacuum Products vacuum butterfly valves are designed to have a low leak rate, typically on the order of 1x10-9 std. cc/sec. Helium. These butterfly valves have a Conflat CF 2.750 in. vacuum flange for connection to the vacuum system. They are manually operated, made of Stainless Steel and are manufactured in the USA by Ideal Vacuum Products. Requires CF copper gasket, bolts and nut plates for installation, not included.

Condition: New



Part Number: P108169



Price: $411.95


Regular Price: $588.50




Currency: US Dollar (USD)

IVP Ideal Seal, Conflat CF 3.375 in. Butterfly Valve, 1.00 in. Thick, Manual Quarter-Turn, SS
In Stock
16


Ideal Seal, Conflat CF 3.375 in. Butterfly Valve, 1.00 Inch Thick, Manual Quarter-Turn, CF Interface, Stainless Steel. These manual butterfly valves provide a low-cost alternative to bellows sealed gate valves. These valves manually turn from the fully-closed position to fully open with only a quarter turn of the knob. A patented design allows the sealing disk to center itself when closing, with even pressure around the copper knife edge O-ring. This design also helps to lower the amount of scuffing or rolling of the O-ring. Quarter-turn actuation, small footprint and the shortest possible gas path make manual butterfly valves the preferred choice for many applications. These Ideal Vacuum Products vacuum butterfly valves are designed to have a low leak rate, typically on the order of 1x10-9 std. cc/sec. Helium. These butterfly valves have a Conflat CF 3.375 in. vacuum flange for connection to the vacuum system. They are manually operated, made of Stainless Steel and are manufactured in the USA by Ideal Vacuum Products. Requires CF copper gasket, bolts and nut plates for installation, not included.

Condition: New



Part Number: P108170



Price: $543.03


Regular Price: $775.75




Currency: US Dollar (USD)

Conflat Flange (CF) Full Nipple, CF 1-1/3 inches Stainless Steel Fittings
In Stock
17
Expecting 12
Anticipated Arrival 6 on 2024-06-06


Conflat Flange (CF) Full Nipple, CF 1-1/3 inches Stainless Steel Fittings These full nipple vacuum fittings have one rotatable and one fixed 1-1/3 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Full Nipple, CF 1-1/3 inches, Stainless Steel CF Flange Size: CF 1-1/3 inch Common Dimensions: A = 3, B= .75, Flange Size OD = 1.33

Condition: New



Part Number: P102206



Price: $114.77



Currency: US Dollar (USD)

Conflat Flange (CF) Full Nipple, CF 2 1/8 inches Stainless Steel Fittings
Out of Stock
Expecting 1
Anticipated Arrival 1 on 2024-04-28


Conflat Flange (CF) Full Nipple, CF 2-1/8 inches Stainless Steel Fittings These full nipple vacuum fittings have one rotatable and one fixed 2-1/8 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Full Nipple, CF 2 1/8 inches, Stainless Steel CF Flange Size: CF 2 1/8 inch Common Dimensions: A = 4 1/16, B= 1 3/8

Condition: New



Part Number: P104826



Price: $94.16



Currency: US Dollar (USD)

Conflat Flange (CF) Full Nipple, CF 2-3/4 inches, 7 in. Long, 1 Rotatable Flange
In Stock
11


Conflat Flange (CF) Full Nipple, CF 2-3/4 inches, 7 in. Long, 1 Rotatable Flange. This custom length, Ideal Vacuum exclusive, full nipple vacuum fitting is 7" long and has one rotatable and one fixed 2-3/4 inch conflat (CF) flange. Both flanges have through holes (holes are not threaded). This fitting is used for ultra-high vacuum applications and is just long enough to completely encase the Ideal Vacuum AnalyzaVac residual gas analyzer (RGA) probe, keeping it safe from short circuiting and helping protect it from contaminant deposition that occurs when the probe protrudes into the vacuum chamber. This nipple will also work on other manufacturer’s RGAs. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosion resistant stainless steel.Conflat Flange (CF) Full Nipple, CF 2-3/4 inches, Stainless SteelCF Flange Size: CF 2-3/4 inchCommon Dimensions: A = 7.0", B= 1.5", Flange Size OD = 2.75"

Condition: New



Part Number: P1013508



Price: $200.00




Currency: US Dollar (USD)

Conflat Flange (CF) Full Nipple, CF 2-3/4 inches, 5 in. Long, Stainless Steel Fittings
In Stock
34
Expecting 58
Anticipated Arrival 58 on 2024-08-16


Conflat Flange (CF) Full Nipple, CF 2-3/4 inches, 5 in. long, Stainless Steel FittingsThese full nipple vacuum fittings have one rotatable and one fixed 2-3/4 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Full Nipple, CF 2-3/4 inches, Stainless SteelCF Flange Size: CF 2-3/4 inchCommon Dimensions: A = 4.93", B= 1.5", Flange Size OD = 2.75"

Condition: New



Part Number: P102207



Price: $138.13




Currency: US Dollar (USD)

Conflat Flange (CF) Full Nipple, CF 3-3/8 inches Stainless Steel Fittings
Out of Stock
Anticipated Arrival 5 on 2024-05-28


Conflat Flange (CF) Full Nipple, CF 3-3/8 inches Stainless Steel FittingsThese full nipple vacuum fittings have two fixed 3-3/8 inch conflat (CF) flanges. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Full Nipple, CF 3-3/8 inches, Stainless SteelCF Flange Size: CF 3-3/8 inchCommon Dimensions: A = 4.5", B= 2", Flange Size OD = 3.375"

Condition: New



Part Number: P108986



Price: $142.34




Currency: US Dollar (USD)

Bolt Kit For Conflat CF 1.33 Inch Flanged CommandValve or Ideal Seal Buttlerfly Valves, Includes 8-32 x 2.00 Inch Long SHCS Bolts, Platenuts, & Washers.
In Stock
13


Bolt Kit For Conflat CF 1.33 Inch Flanged CommandValve or Ideal Seal Buttlerfly Valves, Includes 8-32 x 2.00 Inch Long SHCS Bolts, Platenuts, & Washers. This bolt kit is used to connect a Conflat CF 1.33" CommandValve or Ideal Seal buttlerfly valves between two through-hole Conflat flanged fittings. This kit consists of six 8-32 x 2.00" long 8-18 stainless steel socket head cap screws (SHCS) bolts, 3 platenuts, and 6 washers. These SCHS bolts require a 9/64" hex wrench.

Condition: New



Part Number: P108981



Price: $36.85




Currency: US Dollar (USD)

Bolt Kit For Conflat CF CF 2.125 or CF 2.75 Inch Flanged CommandValve or Ideal Seal Buttlerfly Valves, Includes 1/4-28 x 2.25 Inch Long SHCS Bolts, Platenuts, & Washers
In Stock
17


Bolt Kit For Conflat CF CF 2.125 or CF 2.75 Inch Flanged CommandValve or Ideal Seal Buttlerfly Valves, Includes 1/4-28 x 2.25 Inch Long SHCS Bolts, Platenuts, & Washers. This bolt kit is used to connect a Conflat CF 2.125" or CF 2.75" CommandValve inline between two through-hole Conflat vacuum flanged fittings. This kit consists of six 1/4-28 x 2.50" NF, 8-18 stainless steel socket head cap screws (SHCS), 3 platenuts, and 6 washers. These SCHS bolts require a 3/16" hex wrench.

Condition: New



Part Number: P108980



Price: $47.07




Currency: US Dollar (USD)

Bolt Kit For Conflat CF 3.375 Inch Flanged CommandValve or Ideal Seal Buttlerfly Valves, Includes 5/16-24 x 3.00 Inch Long SHCS Bolts, Platenuts, & Washers.
In Stock
58


Bolt Kit For Conflat CF 3.375 Inch Flanged CommandValve or Ideal Seal Buttlerfly Valves, Includes 5/16-24 x 3.00 Inch Long SHCS Bolts, Platenuts, & Washers. This bolt kit is used to connect a Conflat CF 2.125" or CF 2.75" CommandValve inline between two through-hole Conflat vacuum flanged fittings. This kit consists of eight 5/16-24 x 3.0" NF, 8-18 stainless steel socket head cap screws (SHCS), 4 platenuts, and 8 washers. These SCHS bolts require a 1/4" hex wrench.

Condition: New



Part Number: P108979



Price: $63.60




Currency: US Dollar (USD)

Conflat Flange (CF) Copper Gaskets CF Size 1-1/3 inch - 1 each
In Stock
1936


Conflat Flange (CFF) Copper Gaskets CF Size 1-1/3" These conflat copper conflat gaskets fit a conflat flange size of 1-1/3 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.Conflat Flange (CF) Copper Gaskets CF Size 1-1/3" - 1 eachCF Flange Size: CF 1-1/3 inch Common Dimensions: Flange Outer Diameter (OD) 1-1/3", Gasket Outer Diameter (OD) 0.838", Gasket Inner Diameter (ID) 0.640"

Condition: New



Part Number: P102277



Price: $6.59




Currency: US Dollar (USD)

Conflat Flange (CF) Copper Gaskets CF Size 2 1/8, 2.125 inch - 1 each
In Stock
200


Conflat Flange (CFF) Copper Gaskets CF Size 2 1/8 - 1 each These conflat copper conflat gaskets fit a conflat flange size of 2 1/8 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 2 1/8 - 1 eachCF Flange Size: CF 2 1/8 inch, 2.125 Common Dimensions: Flange Outer Diameter (OD) 2 1/8, Gasket Outer Diameter (OD) 1.25, Gasket Inner Diameter (ID) 1.00

Condition: New



Part Number: P104337



Price: $7.08



Currency: US Dollar (USD)

Conflat Flange (CF) Copper Gaskets CF Size 2-3/4 inch - 1 each
In Stock
4521


Conflat Flange (CFF) Copper Gaskets CF Size 2-3/4" These conflat copper conflat gaskets fit a conflat flange size of 2-3/4 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½ , in Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 2-3/4" - 1 eachCF Flange Size: CF 2-3/4 inch Common Dimensions: Flange Outer Diameter (OD) 2-3/4", Gasket Outer Diameter (OD) 1.895", Gasket Inner Diameter (ID) 1.451"

Condition: New



Part Number: P102278



Price: $10.09




Currency: US Dollar (USD)

Conflat Flange (CF) Copper Gaskets CF Size 3-3/8 inch - 1 each
In Stock
942


Conflat Flange (CFF) Copper Gaskets CF Size 3-3/8 These conflat copper conflat gaskets fit a conflat flange size of 3-3/8 inches. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450°C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Conflat Flange (CF) Copper Gaskets CF Size 3-3/8 - 1 eachCF Flange Size: CF 3-3/8 inch Common Dimensions: Flange Outer Diameter (OD) 3-3/8, Gasket Outer Diameter (OD) 2.425, Gasket Inner Diameter (ID) 2.010

Condition: New



Part Number: P102279



Price: $7.85



Currency: US Dollar (USD)

Conflat Flange (CF) Viton Rubber Elastomer Gasket, Flange Size 1.33 inch, OD 0.838 inch, 1 each
In Stock
77


Conflat Flange (CF) CF Viton Rubber Elastomer Gasket Seal, Flange Size 1.33 inch, OD 0.838 inch, - 1 each These conflat Viton gaskets fit a conflat flange size of 1.33 inches. They have been pre-baked and degassed to limit the outgassing in your vacuum system. They can also be used for testing and multiple times for assembly and disassembly. The knife edge of the CF flange presses against the Viton gasket but does not cut into it, making it reuseable, unlike the CF copper or silver gaskets that can only be used once. North American flange sizes are given by flange outer diameter in inches: 1.33 (mini conflat), 2.125, 2.75, 3.375, 4.50, 4.625, 6.00, 6.75, 8.00, 10.00, 12.00, 13.125, 14.00, and 16.50. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Conflat Flange (CF) Viton Gaskets CF Size 1.33 - 1 each CF Flange Size: CF 1.33 inch, 1 1/3 inch Common Dimensions: Conflat Flange Outer Diameter (OD) 1.33, Gasket Outer Diameter (OD) 0.838

Condition: New



Part Number: P104339



Price: $16.75



Currency: US Dollar (USD)

Conflat Flange (CF) Viton Rubber Elastomer Gasket, Flange Size 2.75 inch, OD 1.895 inch, 1 each
In Stock
104


Conflat Flange (CF) CF Viton Rubber Elastomer Gasket Seal, Flange Size 2.75 inch, OD 1.895 inch, - 1 each These conflat Viton gaskets fit a conflat flange size of 2.75 inches. They have been pre-baked and degassed to limit the outgassing in your vacuum system. They can also be used for testing and multiple times for assembly and disassembly. The knife edge of the CF flange presses against the Viton gasket but does not cut into it, making it reuseable, unlike the CF copper or silver gaskets that can only be used once. North American flange sizes are given by flange outer diameter in inches: 1.33 (mini conflat), 2.125, 2.75, 3.375, 4.50, 4.625, 6.00, 6.75, 8.00, 10.00, 12.00, 13.125, 14.00, and 16.50. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Conflat Flange (CF) Viton Gaskets CF Size 2.75 - 1 each CF Flange Size: CF 2.75 inch, 2 3/4 inch Common Dimensions: Conflat Flange Outer Diameter (OD) 2.75, Gasket Outer Diameter (OD) 1.895

Condition: New



Part Number: P104341



Price: $25.13



Currency: US Dollar (USD)

Conflat Flange (CF) Viton Rubber Elastomer Gasket, Flange Size 3.375 inch, OD 2.245 inch, 1 each
In Stock
6


Conflat Flange (CF) CF Viton Rubber Elastomer Gasket Seal, Flange Size 3.375 inch, OD 2.425 inch, - 1 each These conflat Viton gaskets fit a conflat flange size of 3.375 inches. They have been pre-baked and degassed to limit the outgassing in your vacuum system. They can also be used for testing and multiple times for assembly and disassembly. The knife edge of the CF flange presses against the Viton gasket but does not cut into it, making it reuseable, unlike the CF copper or silver gaskets that can only be used once. North American flange sizes are given by flange outer diameter in inches: 1.33 (mini conflat), 2.125, 2.75, 3.375, 4.50, 4.625, 6.00, 6.75, 8.00, 10.00, 12.00, 13.125, 14.00, and 16.50. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. Conflat Flange (CF) Viton Gaskets CF Size 3.375 - 1 each CF Flange Size: CF 3.375 inch, 3 3/8 inch Common Dimensions: Conflat Flange Outer Diameter (OD) 3.375, Gasket Outer Diameter (OD) 2.425

Condition: New



Part Number: P104342



Price: $34.24



Currency: US Dollar (USD)

Viton Rebuild Kit for CF 1.33 and KF 16 Manual Butterfly Valves
In Stock
32


Viton Seal Rebuild Kit for CF 1.33 and KF 16 Manual Butterfly Valves. This maintenance kit contains easy-to-replace viton seals for your CF 1.33/KF16 Ideal Vacuum Products Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204°C (399°F) or to intermittent exposures up to 316°C (601°F). Viton low temperature performance is dependent on type, with serviceability as low as –31°C (–24 °F) in dynamic seals and –45°C (–49°F) in static seals using Viton GLT-S. Viton is characterized by its: Resistance to degradation by a greater variety of fluids and chemicals than any other non-fluorinated elastomer. Excellent resistance to oils, fuels, lubricants, and most mineral acids. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels. Resistance to aliphatic, aromatic hydrocarbons that dissolve other rubbers. Exceptionally good resistance to compression set, even at high temperatures. Exceptionally good resistance to atmospheric oxidation, and excellent resistance to fungus and mold. Good electrical properties in low voltage, low frequency applications. Low burning characteristics; inherently more resistant to burning than other, non-fluorinated hydrocarbon rubbers. Generally, Viton exhibits outstanding resistance to attack from a wide variety of fluids, including mineral acids, and aliphatic and aromatic hydrocarbons. Please download the service manual for detailed instructions for rebuilding the valve.

Condition: New



Part Number: P108968



Price: $52.33




Currency: US Dollar (USD)

Viton Rebuild Kit for CF 2.125 and KF 25 Manual Butterfly Valves
In Stock
18


Viton Rebuild Kit for CF 2.125 and KF 25 Manual Butterfly Valves. This maintenance kit contains easy-to-replace viton seals for your CF 2.125/KF25 Ideal Vacuum Products Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204°C (399°F) or to intermittent exposures up to 316°C (601°F). Viton low temperature performance is dependent on type, with serviceability as low as -31°C (-24 °F) in dynamic seals and -45°C (-49°F) in static seals using Viton GLT-S. Viton is characterized by its: Resistance to degradation by a greater variety of fluids and chemicals than any other non-fluorinated elastomer. Excellent resistance to oils, fuels, lubricants, and most mineral acids. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels. Resistance to aliphatic, aromatic hydrocarbons that dissolve other rubbers. Exceptionally good resistance to compression set, even at high temperatures. Exceptionally good resistance to atmospheric oxidation, and excellent resistance to fungus and mold. Good electrical properties in low voltage, low frequency applications. Low burning characteristics; inherently more resistant to burning than other, non-fluorinated hydrocarbon rubbers. Generally, Viton exhibits outstanding resistance to attack from a wide variety of fluids, including mineral acids, and aliphatic and aromatic hydrocarbons. Please download the service manual for detailed instructions for rebuilding the valve.

Condition: New



Part Number: P108970



Price: $45.36




Currency: US Dollar (USD)

Viton Rebuild Kit for CF 2.75 and KF 40 Manual Butterfly Valves
Out of Stock
Anticipated Arrival 10 on 2024-04-28


Viton Rebuild Kit for CF 2.75 and KF 40 manual Butterfly Valves. This maintenance kit contains easy-to-replace viton seals for your CF 2.75/KF40 Ideal Vacuum Products Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204°C (399°F) or to intermittent exposures up to 316°C (601°F). Viton low temperature performance is dependent on type, with serviceability as low as -31°C (-24 °F) in dynamic seals and -45°C (-49°F) in static seals using Viton GLT-S. Viton is characterized by its: Resistance to degradation by a greater variety of fluids and chemicals than any other non-fluorinated elastomer. Excellent resistance to oils, fuels, lubricants, and most mineral acids. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels. Resistance to aliphatic, aromatic hydrocarbons that dissolve other rubbers. Exceptionally good resistance to compression set, even at high temperatures. Exceptionally good resistance to atmospheric oxidation, and excellent resistance to fungus and mold. Good electrical properties in low voltage, low frequency applications. Low burning characteristics; inherently more resistant to burning than other, non-fluorinated hydrocarbon rubbers. Generally, Viton exhibits outstanding resistance to attack from a wide variety of fluids, including mineral acids, and aliphatic and aromatic hydrocarbons. Please download the service manual for detailed instructions for rebuilding the valve.

Condition: New



Part Number: P108972



Price: $45.36




Currency: US Dollar (USD)

Viton Rebuild Kit for CF 3.375 and KF 50 Manual Butterfly Valves
Out of Stock
Anticipated Arrival 90 on 2024-04-28


Viton Rebuild Kit for CF 3.375 and KF 50 Manual Butterfly Valves. This maintenance kit contains easy-to-replace viton seals for your CF 3.375/KF50 Ideal Vacuum Products Manual Butterfly Valve. Viton seals are generally rugged, however, heavy mechanical and chemical exposure may cause wear over time. Our easy-to-service valve design makes replacement of these seals fast and simple. Included within are Viton seals, set screw, and vented valve fastening screws. Compared to most other elastomers, Viton is better able to withstand high temperature, while simultaneously retaining its good mechanical properties. Oil and chemical resistance are also essentially unaffected by elevated temperatures. Compounds of Viton remain substantially elastic indefinitely when exposed to laboratory air oven aging up to 204°C (399°F) or to intermittent exposures up to 316°C (601°F). Viton low temperature performance is dependent on type, with serviceability as low as -31°C (-24 °F) in dynamic seals and -45°C (-49°F) in static seals using Viton GLT-S. Viton is characterized by its: Resistance to degradation by a greater variety of fluids and chemicals than any other non-fluorinated elastomer. Excellent resistance to oils, fuels, lubricants, and most mineral acids. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels. Resistance to aliphatic, aromatic hydrocarbons that dissolve other rubbers. Exceptionally good resistance to compression set, even at high temperatures. Exceptionally good resistance to atmospheric oxidation, and excellent resistance to fungus and mold. Good electrical properties in low voltage, low frequency applications. Low burning characteristics; inherently more resistant to burning than other, non-fluorinated hydrocarbon rubbers. Generally, Viton exhibits outstanding resistance to attack from a wide variety of fluids, including mineral acids, and aliphatic and aromatic hydrocarbons. Please download the service manual for detailed instructions for rebuilding the valve.

Condition: New



Part Number: P108974



Price: $45.36




Currency: US Dollar (USD)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com